About BedJet 3 Smart Remote
The BedJet is the world's first ultra rapid cooling, heating and climate control system just for your bed. Every BedJet system comes standard with Bluetooth connectivity. The BedJet 3 Smart Remote App duplicates all...
The BedJet is the world's first ultra rapid cooling, heating and climate control system just for your bed. Every BedJet system comes standard with Bluetooth connectivity. The BedJet 3 Smart Remote App duplicates all features of the included RF remote control from the convenience of your iOS device. The BedJet 3 Smart Remote allows control of the BedJet 3 model 3S-800NA, and Vet BedJet Warm Air System model J1034ZMM. We are always working on improvements to our products! Please email us if you find any bugs or have trouble getting the App to work properly to
[email protected].
Version History - Fixed incorrect shut-off time limits for some Heat mode temps in the Biorhythm editor. - Fixed Biorhythm edit logic: Time setting now auto-adjusts correctly to the maximum limit based on Mode/Fan/Temp changes. - Improved the Biorhythm fan, time, and temperature selector UI. Selectors now default to the current setting for easier editing. 2.5 04/02/2025 - Resolves continual WiFi prompt/remote setup - Integrates new device setup within app 2.4.1 08/02/2024 - Added control for Vet BedJet Warm Air System model J1034ZMM - Removal of WiFi prompt for new device pairing and setup 2.4 06/19/2024 Update allows initial new device setup of BedJet 3 without a physical remote needed. Factory Reset option added to the app menu. 2.3 09/03/2022 Update resolves DRY mode temperature slider issue (slider moving while running or not appearing). Resolves Biorhythm bug forcing changes to first step of saved schedule. 1.9 10/02/2021 Resolves issue with app freezing on "Firmware Update Needed" message upon initial connection to BedJet unit. Some owners reported this message did not allow proceeding to WiFi setup screen, updated version has resolved this and allow user to complete setup. 1.6 03/26/2021 - This version has been updated to prompt for iOS App Store review after initial setup/use 1.5 02/11/2021 - Biorhythm Time Selection for "End Time" corrected to show hours 1-12 vs. existing 0-11 - App Version number shown at bottom of app splash screen - Resolved issue with frequent app crashing on "Add New Device" screen - Resolved issue with "Go Back" button on "Add New Device" screen being greyed out - Resolved issue with "Add New Device" screen showing both paired and unpaired devices, now shows only new unpaired BedJet units 1.4.1 12/30/2020 - Added "Biorhythm ON" and Step number on main screen when running Biorhythm Schedule - Added "MODE" and "FAN SPEED" above selections when picking Mode and Fan speed for Biorhythm step - Resolved issue with vertical scroll bar on Biorhythm schedule when too many steps to view within box - Selection for "Time Mode" in Biorhythm changed to "Via Duration" and "Via End Time" - Added time-out for unsuccessful connection to device in "Add New Device" screen - Added ability to delete paired BedJets from app Device List screen - App now shows set name of previously paired BedJets on "Paired Device List" screen 1.2 12/17/2020 UPDATE V1.1 RESOLVES BUG WHICH FROZE APP WHEN ENTERING LONGER WIFI PASSWORD (TO EDGE OF PASSWORD TEXT BOX) 1.1 12/05/2020 1.0 11/30/2020
Previous Versions
Here you can find the changelog of BedJet 3 Smart Remote since it was posted on our website on 2021-12-15 15:39:17.
The latest version is 2.5 and it was updated on 2026-06-11 23:47:27. See below the changes in each version.
BedJet 3 Smart Remote version 2.5
Updated At: 2026-06-11
Changes: Version History - Fixed incorrect shut-off time limits for some Heat mode temps in the Biorhythm editor.
- Fixed Biorhythm edit logic: Time setting now auto-adjusts correctly to the maximum limit based on Mode/Fan/Temp changes.
- Improved the Biorhythm fan, time, and temperature selector UI. Selectors now default to the current setting for easier editing. 2.5 04/02/2025 - Resolves continual WiFi prompt/remote setup
- Integrates new device setup within app 2.4.1 08/02/2024 - Added control for Vet BedJet Warm Air System model J1034ZMM
- Removal of WiFi prompt for new device pairing and setup 2.4 06/19/2024 Update allows initial new device setup of BedJet 3 without a physical remote needed. Factory Reset option added to the app menu. 2.3 09/03/2022 Update resolves DRY mode temperature slider issue (slider moving while running or not appearing). Resolves Biorhythm bug forcing changes to first step of saved schedule. 1.9 10/02/2021 Resolves issue with app freezing on "Firmware Update Needed" message upon initial connection to BedJet unit. Some owners reported this message did not allow proceeding to WiFi setup screen, updated version has resolved this and allow user to complete setup. 1.6 03/26/2021 - This version has been updated to prompt for iOS App Store review after initial setup/use 1.5 02/11/2021 - Biorhythm Time Selection for "End Time" corrected to show hours 1-12 vs. existing 0-11
- App Version number shown at bottom of app splash screen
- Resolved issue with frequent app crashing on "Add New Device" screen
- Resolved issue with "Go Back" button on "Add New Device" screen being greyed out
- Resolved issue with "Add New Device" screen showing both paired and unpaired devices, now shows only new unpaired BedJet units 1.4.1 12/30/2020 - Added "Biorhythm ON" and Step number on main screen when running Biorhythm Schedule
- Added "MODE" and "FAN SPEED" above selections when picking Mode and Fan speed for Biorhythm step
- Resolved issue with vertical scroll bar on Biorhythm schedule when too many steps to view within box
- Selection for "Time Mode" in Biorhythm changed to "Via Duration" and "Via End Time"
- Added time-out for unsuccessful connection to device in "Add New Device" screen
- Added ability to delete paired BedJets from app Device List screen
- App now shows set name of previously paired BedJets on "Paired Device List" screen 1.2 12/17/2020 UPDATE V1.1 RESOLVES BUG WHICH FROZE APP WHEN ENTERING LONGER WIFI PASSWORD (TO EDGE OF PASSWORD TEXT BOX) 1.1 12/05/2020 1.0 11/30/2020
BedJet 3 Smart Remote version 2.5
Updated At: 2025-04-02
Changes: Apr 2, 2025
Version 2.5
- Fixed incorrect shut-off time limits for some Heat mode temps in the Biorhythm editor.
- Fixed Biorhythm edit logic: Time setting now auto-adjusts correctly to the maximum limit based on Mode/Fan/Temp changes.
- Improved the Biorhythm fan, time, and temperature selector UI. Selectors now default to the current setting for easier editing.
BedJet 3 Smart Remote version 2.5
Updated At: 2025-04-02
Changes: - Fixed incorrect shut-off time limits for some Heat mode temps in the Biorhythm editor.
- Fixed Biorhythm edit logic: Time setting now auto-adjusts correctly to the maximum limit based on Mode/Fan/Temp changes.
- Improved the Biorhythm fan, time, and temperature selector UI. Selectors now default to the current setting for easier editing.
BedJet 3 Smart Remote version 2.4.1
Updated At: 2024-08-02
Changes: Aug 2, 2024
Version 2.4.1
- Resolves continual WiFi prompt/remote setup
- Integrates new device setup within app
BedJet 3 Smart Remote version 2.4
Updated At: 2024-06-19
Changes: Jun 19, 2024
Version 2.4
- Added control for Vet BedJet Warm Air System model J1034ZMM
- Removal of WiFi prompt for new device pairing and setup
BedJet 3 Smart Remote version 2.3
Updated At: 2022-09-03
Changes: Sep 3, 2022
Version 2.3
Update allows initial new device setup of BedJet 3 without a physical remote needed. Factory Reset option added to the app menu.
BedJet 3 Smart Remote version 1.9
Updated At: 2021-10-02
Changes: Oct 2, 2021 Version 1.9
Update resolves DRY mode temperature slider issue (slider moving while running or not appearing). Resolves Biorhythm bug forcing changes to first step of saved schedule.
Disclaimer
Official App Store Link
We do not host BedJet 3 Smart Remote on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for BedJet 3 Smart Remote is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
