Article Categories
- All Categories
-
Data Structure
-
Networking
-
RDBMS
-
Operating System
-
Java
-
MS Excel
-
iOS
-
HTML
-
CSS
-
Android
-
Python
-
C Programming
-
C++
-
C#
-
MongoDB
-
MySQL
-
Javascript
-
PHP
Computer Engineering Articles
Page 34 of 36
First-Generation (1G) Mobile Phones
Wireless cellular technology or mobile communications started with first generation mobile phones, popularly known as 1G. It was an analog telecommunications system, introduced in 1979 and continued to mid of the 1980s. History 1G mobile communication system was introduced in Japan in 1979 by Nippon Telegraph and Telephone (NTT). Initially, it started in Tokyo and within next five years expanded to cover the whole of Japan. In 1981, Nordic Mobile Telephone (NMT) was launched in European countries. In 1983, Ameritech launched 1G mobiles in the USA using Motorola mobile phones. Use of mobile communication system was then followed by several ...
Read MoreImproved Mobile Telephone System
Improved Mobile Telephone System (IMTS) was a radio system that linked to public switched telephone networks (PSTN) before the era of cellular mobiles. It was introduced in 1964 and was the wireless equivalent of landline dial up telephones. Features IMTS was a radio system for mobile telephones that was an improvement over the previous Mobile Telephone System (MTS). MTS supported half duplex communication. So, the communicating parties could not communicate simultaneously. IMTS supported full duplex communication, thus allowing both the user to talk and hear simultaneously. IMTS required a high power transmitter to be installed, preferably on the ...
Read MoreFrequency Division Duplex
Frequency division duplex (FDD) is a communication technique where the connected parties can communicate with each other in both directions through use of separate frequency bands for transmitting and receiving. Since FDD uses different frequency bands for upstream data and downstream data, the sending and the receiving signals do not interfere with each other. FDD in Cellular Networks Cellular networks use FDD to separate the channels. One block of the electromagnetic spectrum is allocated for uplink, which carries data from mobile phones to a base station. A different block of the spectrum is allocated to downlink, carrying data ...
Read MoreSecond-Generation (2G) Mobile Phones
Second generation (2G) mobile phones switched from analog system of 1G to digital system. It was commercially launched in 1991 as GSM standard in Finland. As with 1G phones, 2G phones didn’t have any worldwide standardizations. 2G systems were also known as personal communications services (PCM). Advantages of 2G over 1G It allows voice signals to be digitized and compressed. So, they are more efficient on frequency spectrum than 1G. They introduced data services for mobile in form of SMS text messaging. Data and voice signals are digitally encrypted. So, security against eavesdropping and fraud increased manifold. Digital signals ...
Read MoreDigital Advanced Mobile Phone System
Digital Advanced Mobile Phone System (D-AMPS)is a digital version of Advanced Mobile Phone Systems (AMPS), the original analog standard for cellular phones. D-AMPS uses a combination of time division multiple access (TDMA) and frequency division multiple access (FDMA). It adds TDMA to get three channels per AMPS channel, thus tripling the number of calls on a channel. Features They are standardised by IS-54 and IS-136. As in AMPS, D-AMPS also uses frequencies from 800 to 900MHz for transmission. Half of the spectrum is used for sending signals and the other half is used for receiving signals. The frequency ...
Read MoreGlobal System for Mobile Communications
Global System for Mobile communication (GSM) is the most widely used digital mobile telephony system. GSM technology was first launched in Finland in 1991. It was developed by European Telecommunications Standards Institute (ETSI) to describe the protocols for 2G mobile communications.Presently, GSM comprises of approximately 90% of mobile connections worldwide. Features Original 2G standard was a digital, circuit-switched, full duplex network. GSM is part of the evolution of wireless mobile telecommunications including High-Speed Circuit-Switched Data (HSCSD), General Packet Radio Services (GPRS), Enhanced Data GSM Environment (EDGE), and Universal Mobile Telecommunications Service (UMTS). GSM operates at either 900 MHz ...
Read MoreHandoff in Mobile Connections
Definition In cellular communications, the handoff is the process of transferring an active call or data session from one cell in a cellular network or from one channel to another. In satellite communications, it is the process of transferring control from one earth station to another. Handoff is necessary for preventing loss of interruption of service to a caller or a data session user. Handoff is also called handover. Situations for triggering Handoff Handoffs are triggered in any of the following situations − If a subscriber who is in a call or a data session moves out of ...
Read MoreEnhanced Data rates for GSM Evolution (EDGE)
Enhanced Data-rates for GSM Evolution (EDGE) is an improved version of GSM providing higher data transmission rate than GSM, while being compatible with the older systems. Features It was standardized by 3GPP as a part of GSM family and was deployed in GSM networks in 2003. The other names for EDGE are Enhanced GPRS (EGPRS) and IMT-Single Carrier (IMT-SC). It is compatible with any packet – switched application. It is also backward – compatible, i.e. compatible with existing or older versions. It enables data to be sent over a GSM TDMA systems at speeds of 384Kbps. GSM uses the ...
Read MoreCDMA2000
CDMA2000 is a code division multiple access (CDMA) version of IMT-2000 specifications developed by International Telecommunication Union (ITU). It includes a group of standards for voice and data services − Voice − CDMA2000 1xRTT, 1X Advanced Data − CDMA2000 1xEV-DO (Evolution-Data Optimized) Features CDMA2000 is a family of technology for 3G mobile cellular communications for transmission of voice, data and signals. It supports mobile communications at speeds between 144Kbps and 2Mbps. It has packet core network (PCN) for high speed secured delivery of data packets. It applies multicarrier modulation techniques to 3G networks. This gives higher ...
Read MoreLong-term Evolution (LTE)
Long – term evolution or LTE is a standard for wireless technology based upon GSM/EDGE and UMTS/HSPA technologies. It offers increased network capacity and speed to mobile device users. It is an extension of the 3G technology for high-speed mobile communications. LTE-Advanced is an improvement over LTE that meets the criteria of 4G wireless communications as laid down by IMT-Advanced standards. It provides greater speeds and better quality of communications. Both LTE and LTE-A are used for mobile broadband communications and in VoIP. Features of LTE LTE was specified by The 3rd Generation Partnership Project (3GPP) release 8 was ...
Read More