With a load of rails for fans and panels full of holes, there's plenty of opportunity to make it a case suited for airflow. But being the best PC case takes more than just looks, so we put it to the test in our review.

Main features and specifications

The Hyte X50 is certainly an eye-catching design of a PC case. With curved panels, smooth surfaces, more cutesy design, it has a load of colorways to choose between and is a more unique option. Pushing the limits of production and what a chassis is capable of, there's a lot to enjoy on it.

There are two versions of the case, the X50 and the X50 Air; the latter swaps the glass side panel for a mesh panel instead and limits the colors to black and white. Whereas the standard X50 adds an extra four options: wild cherry, matcha, strawberry milk, and taro milk. So here's a look at its specs and features listed below.

Pricing

For the cost of the case, it has a variety of prices depending on where you look, especially since Hyte has suspended its shipments into the US from its own store. It is listed for $159.99 on its store, but on Amazon, it is priced at $171.99 as of writing. In the UK, you can pick it up for £149.90.

It’s certainly a premium price to pay for what appears, at first glance, to be a fairly standard mid-tower ATX case. Especially with no included fans, and something like the 4000D RS coming in at $114.99, the NZXT H5 Flow at $94.99, or the Lian Li LANCOOL 217 at $119.99. However, the X50 pushes what's possible in terms of builds as it adds curved glass and mesh panels, and innovative manufacturing that certainly makes it more expensive.

Outside

With the specs in mind and an overview of what the case has to offer, now I'll go over the closer details. Starting from the unboxed case and looking over the outside of it.

Front

From the front, the case looks fairly simple, with nothing immediately striking - except for the fact that it’s made from a single, rounded panel. The full-metal mesh is crafted from one sheet of material, giving it a refined finish while also providing effective dust control. The result is a smooth, elegant front with two rounded feet extending slightly below.

The panel is also easy to remove, simply sliding off from a hidden groove underneath. Multiple sockets hold it securely in place while concealing the fan mount rails behind it. These rails allow you to mount fans either flush with the case or with a 30mm offset, giving a bit more clearance if needed.

Rear

Looking at the back of the case, there are numerous cutouts and mounts throughout. At the top sits a gold-colored Hyte logo, positioned next to the PSU opening, which in this model is located at the top of the main chamber. Below that is the I/O cutout, accompanied by a single 120mm fan mount.

The rear panel also features twisted metal slits that provide airflow across the entire back. This includes the PCIe slot covers, which sit slightly recessed from the main panel and are secured with screws for reuse. Interestingly, there are also outward-facing metal tie-down arcs along the left side, offering additional cable management options for keeping your desk setup clean and organized.

Sides

Both sides of the case are covered by single, sweeping panels that extend from top to bottom - a feature that takes more engineering than you might think. The right side features a large tempered glass panel that rises higher than those on many other cases, while the left side copies the design of the front panel with a curved mesh that spans the full height.

Removing the panels is simple. Both have slots at the bottom that allow you to lift them off, with tabs at the top and bottom that snap into place. This secure design holds the panels firmly without the need for screws, making access to the interior quick and easy.

Top

With so much of the case covered by panels and their sweeping curves, much of the top is either glass or mesh. Since the glass takes up most of the space, the front and left side panels occupy the rest, leaving only a slim strip of metal for the I/O. This includes a power button, two USB Type-A ports, one USB Type-C port, and a 3.5mm combo audio jack.

Bottom

Underneath, the corners are accented with small, rounded “paw” feet. While they may not be immediately noticeable, they add a playful touch that complements the case’s overall rounded aesthetic.

In the center of the bottom panel, there are three fan mounting holes, one of which cuts through one of the “toe beans” on the feet. The X50 includes a magnetic mesh panel to cover this area - the only separate mesh panel on the case. However, it can feel a bit loose and tricky to keep properly aligned.

Inside

Taking off the panels, I take a look at what's inside the case, with a closer look at the features you can use to build, and the general layout of it.

Main chamber

Looking into the main chamber, the PSU shroud immediately catches the eye. Unlike the typical bottom placement, the X50 opts to place the PSU in the top-left corner, slightly encroaching into the upper space - an unusual but striking design choice.

Along the front and side, large columns of fan rails and open space lead straight to the front mesh, providing plenty of room for radiators and additional fans. The bottom panel also features a recessed area that can accommodate three individual fans, while the back has a single dedicated fan mount.

The motherboard tray dominates the chamber. ATX standoffs are pre-installed, with clear indicators for other motherboard sizes, making installation straightforward and eliminating guesswork. Around the tray, there are generous cutouts for cable management, including a large opening at the bottom, along the right side, and at the top, allowing easy routing of cables for a clean build.

Back chamber

Once opened, the back chamber occupies just over half the length of the case. With the front portion taken up by fan mounts, most of the usable space is behind the motherboard tray. The power supply sits at the top in the main chamber, keeping it conveniently out of the way.

On the left side, pre-installed Velcro straps run down the length of the chamber to manage power cables efficiently. At the bottom, a storage sled - secured with a single screw - supports up to three drives, complements the case’s curved design, and houses the accessories box straight out of the box.

Rubber grommets along the back help conceal cables and guide them neatly to the front. Below that, the front I/O cables pass through a dedicated gap, making routing simple and organized.

Build experience

Building in this case was relatively quick and straightforward. At over 11kg, it’s on the heavier side, but removing it from the box and packaging was easy. Once the panels are off, the interior opens up, providing easy access for installation.

While unpacking, I noticed the instruction manual wasn’t included, so I had to reference it online for a few details. On the plus side, the screws are clearly labeled in reusable bags, making it easy to select the correct ones and avoid stripping them or the standoffs. Though less environmentally friendly, the screws are also packaged in single-use plastics inside the reusable bags for some reason.

The spacious main chamber made mounting the motherboard straightforward. However, the absence of a middle standoff makes installation easier with the case lying flat rather than upright. There are plenty of spots for FA12 fans - we were sent two packs of the color-matched FA12s - which allowed me to fill the bottom and side panels to optimize airflow into the case and directly toward the GPU.

The FA12 fans conveniently came with daisy-chain cables, meaning you only need a single header to power multiple fans, rather than using several headers or a separate fan hub. Installing the offset radiator at the front was straightforward, as it can be removed for easier mounting, eliminating the need to hold it in place while screwing it down. One minor issue was that one of the fan holes sits inside one of the feet underneath, making it hard for my screwdriver to reach - which can be difficult during the build process.

Sliding in the power supply was similarly hassle-free, thanks to the open layout. With a 210mm PSU, space was a bit tight, and I wasn’t able to use the Velcro straps at the top, but I made use of the ones along the side and added the included straps to tidy up the cables.

The storage area proved more frustrating. Installing an SSD into the small cage is difficult once the cage is mounted. Cabling it and then securing the cage sometimes caused the connections to loosen, requiring a rework and some blind fumbling.

Back here, there’s limited room for additional hardware. With two hubs to manage for the AIO and fans, the area became cramped, and cable management could benefit from extra mounting points.

As for the rest of the routing cables, it was quite nice to have grommets spanning the whole spine and top. It meant I could direct each cable very close to where it needed to be. Once again, though, my motherboard was on the larger side, and a bit larger than the 10.6” EATX the case supports, so it wasn't a problem to cable, but it does overlap with the side fans and could interfere with airflow, but most probably won't be installing an MSI MEG X870E Godlike X Edition into the case.

Once that was in, all that was left was the GPU, which has plenty of room to fit in, even the huge ROG Astral RTX 5090. Though it did take me a few goes to slot it in since the IO prongs of the GPU kept sliding to the outside, so the panel might be a bit too close for quick, easy installation. There is also no integrated support, and no clear space underneath to use a standing one, leaving it sagging.

Fans

By default, the Hyte X50 doesn’t come with any fans pre-installed, even in the Air version. Because of the case’s unique colors, finding matching fans isn’t easy. For the non-black or non-white variants, Hyte is essentially the only source for perfectly color-matched sets.

For the X50, Hyte offers FA12 120mm fans. These ABS fans feature fluid dynamic bearings, a maximum speed of 1,500 RPM, and an airflow rating of 72 CFM. Sold in sets of four, the package includes screws for each fan and a splitter cable, making it much easier to power multiple fans from a single header.

Design-wise, the fans complement the case with smooth edges and curved blades, fitting well in the intended locations—one at the back, with the rest along the side or bottom. The Matcha edition stands out for its white sleeved cables, which not only look clean but also coordinate with the case’s color scheme.

A four-pack retails for $49.99, which isn’t unreasonable for four quality fans. However, it does lock you into a single color option, limiting flexibility for matching other components in your build. The white cables, in particular, push you toward a lighter color palette rather than mixing with darker components, as I discovered during testing.

Performance

With the system up and running, I put it through our testing lab to see how well it performed under load. Utilizing Furmark 2 and pinning the 9800X3D CPU and RTX 5090 GPU, it puts it under the maximum power draw and heat load to see how well it's handled.

With an AIO cooler mounted in the front, and a whole set of fans on the side and bottom, there certainly was plenty of air rushing in through the case. In reality, it's probably too much and can interfere with all the intake fans, possibly creating turbulence inside. The bottom rail does mean the GPU gets a fresher supply, though, instead of getting the warm air coming from the AIO, giving it a better cooling capability with a fresher supply.

During the 20-minute test, the CPU reached a peak of 95°C, the GPU to 67°C, and the motherboard MOS capacitors rose to 54°C. Considering the abnormal load, it's keeping the motherboard and GPU in check while the processor is pinned at its safe levels and not going above.

This is under the default fan mode set on the motherboard, as the fans are daisy-chained together and using the system fan headers on board. With the number of holes in the case and without a finer mesh, the fans don't create any unpleasant sounds and do, in fact, manage to keep relatively quiet under the load.

Conclusion

The Hyte X50 is undeniably a striking PC case. Its gentle, curved design and wide variety of colorways make it an eye-catching chassis. Combined with solid performance, it emphasizes the importance of planning your build carefully - especially if you want to match the fans from Hyte or create a cohesive white-themed setup.

The case offers plenty of space in the main chamber, though the back can feel somewhat cramped, creating a mixed experience during assembly. Overall, however, the X50 is a well-designed, high-quality option that’s an excellent choice for builders who want a visually distinctive and functional case.

The Light Base 500 LX features be quiet!’s signature reverse RGB fans, delivering strong cooling performance while maintaining a refined aesthetic. Combined with extensive support for additional fan mounts and a secondary chamber, the case offers plenty of flexibility for enhanced cooling and wider customization.

With that in mind, let’s take a closer look at the design, usability, and performance of the Light Base 500 LX to see how it fared in our testing.

Main features and specifications

be quiet! positions the Light Base 500 LX as a case that balances performance with aesthetics, while prioritising accessibility and functionality. As a mid-tower, aquarium-style chassis, it features an open dual-chamber layout with angled side-mounted fans and no traditional front intake.

Below are the specifications for the be quiet! Light Base 500 LX in black that we received for review. The case is also available in a white variant, as well as a standard non-LX model that omits RGB lighting.

Pricing

The Light Base 500 LX was released with an MSRP of €144.90 set by the German manufacturer. In other areas, it can be found for $144.90 in the US and for £131.59 in the UK. For a more premium build featuring a full set of fans, this is actually a rather good value.

In comparison, the Lian Li O11 Vision Compact, without fans and a glass top, costs $124.99. The similar O11D Mini V2 with a mesh top panel, but also lacking fans, costs $89.99, and the Hyte Y70, also barebones but with some extras on top, comes in at $219.99. Something like the Montech XR-B with a simpler design comes in at a lower $69.90, or the NZXT H6 Flow is not far behind at $109.99.

Outside

Taking a look around the outside of the case, we go over and evaluate the main aesthetics of the case and what it has to offer, looks-wise.

Front

Looking at the Light Base 500 LX head-on, it has a wide, open appearance. The tempered glass side panel gives a clear view straight into the main chamber. The case features a dual-chamber layout: the left side showcases the main components behind the glass, while the right side hides angled fans behind a filtered panel.

On the right-hand corner “pillar” of the case sits the front I/O, offering solid connectivity. This includes two USB Type-A ports, a USB Type-C port, a 3.5mm audio jack, and three buttons for power, reset, and RGB control.

At the bottom of the front panel is a metal “chin” that supports the glass and side panels. Angular feet lift the chassis, providing good clearance for airflow while adding a subtle, stylish touch to the overall design.

Rear

At the back of the case, the width of the case is and its two partitions becomes obvious. On the left, the two possible power supply mount options are visible, with the storage sled occupying one of them. There is also the prominent gap next to the side panel that gives you an easier time opening up the left side.

On the right, there is another prominent gap for the motherboard IO, with the rear fan mesh next to it that comes with an included 120mm fan and support for sizes up to 140mm.

At the bottom are the 7 expansion slots and their covers, screwed into place, and with a plate cover next to them covering the sizable gap (since the case comes with a vertical GPU mount conversion, there would be a rather big hole there otherwise).

Sides

The sides of the case are a lot simpler. There's a sizable metal lip at the bottom which runs around the front and sides of the case, and the side panels are fixed in place rather tightly by holds within this, along with ball sockets (there are no screws).

On one side is a glass panel showcasing the insides, with the other being a mix of perforated mesh and solid metal that allows airflow to the fans and PSU. The power supply gets its own meshed airflow cover.

Top

On top of the case is another mix of metal mesh and solid panel held in with ball joints. Underneath are the fan mounting rails for the main chamber. At the front is the fan rail and the screws for the glass panel.

Bottom

In the rear compartment of the dual-chamber design, the bottom of the case is a solid metal panel with a couple of indents under the PSU. In the main compartment, there is a rather long mesh filter underneath the main chamber for the three fans that the case supports at the bottom - a useful feature to get fresh air directly into your graphics card and enhance its cooling.

Inside

Removing all the panels, we then had a look at what each chamber offers in terms of buildability and performance.

Main chamber

Once you have all the panels removed, the main chamber is very open and surprisingly big, offering up plenty of space to build inside. The main feature is the angled fan rail at the back right, positioned to direct airflow towards the components, which frees the front of the case from obstruction to enhance the viewing experience.

The rear fan stands out as a normal front-facing RGB fan installed high above the expansion slots, with the bottom fan rail sitting in the cut-out, sunken below the main chamber.

The motherboard panel itself has a lot of cut-outs, allowing lots of potential routes to run cables more easily and closely to where they need to go.

Back panel

The second chamber is a very segmented area with parts. On the far left, there's a channel for the front panel IO and channelling the cables from this downward and away. To the right of that is a channel to the front that passes the fan mesh.

Then the main big area is where you do all your PSU and storage installations. There is a bracket that holds up the top power supply installation and the storage bracket that is held in by a single screw on one end and more on the rear. On this, there are cut-outs that work double-sided to support HDD and SSD simultaneously, although the fan controller removes one HDD option on this model.

Down the column on the left is where you can find the main router channelling as be quiet! adds a range of Velcro straps in there for that job, which makes the process of tidying up your cables significantly easier.

Build experience

Building the case in general was a great experience: it's a very open design and the included instructions are nice and easy to follow. Important for readers to note when looking at the images of our build - I did miss a key step in the manual: the supported component sizes. The components are used were from my current test bench, which consisted of an MSI Godlke X870E X Edition motherboard and a Seasonic TX-1600 Noctua edition power supply that both certainly exceeded the recommended sizing, making the build a bit tougher than it should have been towards the end, and a bit more cramped looking, but this is entirely my fault!

Unpacking the box was a bit tricky in places due to the weight of the case (though it was easier than the HAVN BF 360 Flow we recently reviewed). The whole package weighs over 14kg, with the case alone at nearly 11kg. Taking off the panels does lighten it significantly, making it easier to handle when building inside of it.

The case comes with a handy booklet that goes through how to build the PC step-by-step, with clear instructions highlighting each feature and how to use it. This is rather handy with a case like this, which comes with a lot of parts that aren't in a more basic model. It was handy for reminding me that the front panel is secured with screws (given the others are not), and for checking I was taking off the side panels correctly, since they did just snap out on the top, but at the bottom they're a bit harder to simply pull out; the tolerances were a bit closer on one side, and a strong pull was needed to get each side out. I was worried that, without thumb screws, the side panels might dislodge easily; however, despite me packing in my bad cable behind it, the rear panel did not pop out.

On the disassembly front, the fan side mount is a bit tougher to remove. There is one big screw on top holding it in place, but even after removing it takes some force to pull out the sled, while also having to be cautious of the fan cabling since the LX model comes with preinstalled fans.

Taking out all the side panels does leave the top sagging in the corners, further exaggerated when an AIO is installed on it, and it starts pulling the corner down. But there is a lot of room up top that makes installation of the radiator rather straightforward and it didn't interfere with the motherboard, even leaving enough space between the motherboard and case to route the cables.

Motherboard installation was also nice, as the middle standoff is one of the 'peg' types without a screw hole. The setup allows you to align the board quickly without having to spend time lining up and screwing in the standoffs, plus it also means I didn't have to take off the M.2 heatsink to install it

As for the graphics card and expansion slots, those are reusable and screw in with individual screws, with the rest of the gap covered with a plate. That's necessary since the case does come with a vertical mount conversion, where it uses that same space for mounting your GPU with a riser. The vertical mount lets you show off your graphics card a bit more compared to the standard configuration.

Around the back where the handy mount bracket is located. The second chamber has two cut-outs for mounting your power supply, either the top or the bottom. But one of them (top by default) is taken up by the long bracket that is double-sided with screw holes for installing up to four drives: two of each - SSD and HDD.

Annoyingly, one of the HDD spits is taken up by the fan controller in the LX model, so you can't take advantage of all of the spaces, but then again, how many people will be using two or even one mechanical HDD in their builds in 2026? Taking off the bracket makes installation less fiddly as you move it away from the inside of the case, except for having to unplug the fan controller in the LX model.

The case also pre-routes the front panel and fans in a luxury-feeling sleeve that brings the cables to the back and allows them to be installed into the motherboard or where needed. As for the rest of the cabling, there are plenty of cutouts around the motherboard tray that give you access to plenty of channels to stealthily hide your cables away from the glass you can see through at the front.

The lack of rubber gromets does mean some areas look raw and a bit of an eyesore. With the longer PSU and motherboard than recommended in our build, it was also hard to feed through the cables due to the lack of space, and they were left dangling in front of the fans - I can't blame the case for my choices, though. Otherwise, it's a very effective method of routing cables at their shortest distance, as it has plenty of cutouts for them and offers a more stealthy-looking design; all of which was rather straightforward and quick, with helpful guides.

Performance

After building and setting up the PC, I put it through our testing lab to see how it performed. Our test consists of loading up the 9800X3D CPU and RTX 5090 GPU with Furmark 2 and putting them to the maximum stress and temps to see how the case fans handle the load. Although not necessarily how you'd use it every day, it's an effective way to see what the case is capable of when you push it to the limits.

Ourt test starts with a five-minute idle, followed by a twenty-minute load, and a final 5 minutre cooldown. As shown in the graph above, the CPU temperature peaked and stabilized at 95°C, while the GPU chip sat at around 68°C, and the memory reached 69°C. The MOS temperatures on the motherboard also peaked at 52°C. The CPU reached a peak power of 147W and stabilised at around 142W. In turn, the GPU stayed at a steady 600W with the fan RPM reaching 80% and nearly 2,000 RPM as it heated up. All of this shows the Light Base 500 LX to be an effective option for cooling with the setup we used, plus it has yet more cooling potential should you utilize that empty bottom compartment for all the extra fans you can add in, which should further improve the results.

As far as noise performance goes, at be quiet!, as the name might suggest, they are focused on silence and keeping the sound of your hardware minimal. We certainly found in the review of their keyboards earlier this year, the Dark and Light Mounts, and in the case of the Light Base LX, it does a very good job of keeping sound to a minimum; it's not silent, but certainly doesn't grate on the ears. The preinstalled fans that take in from the side/front and exhaust in the rear are well designed to pull in air without making too much noise, meaning there's plenty of airflow without whooshing or whistling.

Conclusion

Generally, the be quiet! Light Base 500 LX is a great case to build in and enjoy. With plenty of open space, lots of mounting places, and clear instructions, it's a strong choice as a top chassis to use. Especially with the no compromise of looks and airflow with the included RGB reverse fans, with plenty of glass to show it all off, and a vertical mount for your GPU too. Just be sure to check on the sizing of your hardware (which we failed to do), as it can get a bit cramped in the back.

While the BF 360 Flow is on the more expensive side, it certainly brings plenty to the table - especially if you're looking for a case that prioritizes thermal performance. In this review, we put the HAVN BF 360 Flow through its paces to see; how it stacks up in thermal performance, what it's like to build in, and how its price tag affects its value.

So, let's waste no further time and see how one of this year's highlights from Computex compares against some of the market's similarly priced alternatives.

Main features and specifications

Looking over the main design features and specs, there are a couple of standouts for HAVN's new case. With the case designed as a lower-tier model over the HS 460, it'll be no surprise to hear that some of the more premium features of the 460 have been left out here - most likely to keep costs down. So here are some of the main selling points of the case:

When comparing the BF 360 and 360 Flow, the most noticeable difference is the addition of the pre-installed case fans. Adding two 180mm to the front as intake, and a 140mm in the back for an exhaust, which means it's optimized for AIO CPU cooling - where you can easily install the radiator and fans in the roof.

With both options available in black and white color options, here are the main specs and differences between the two versions.

Pricing

As far as price goes, HAVN has provided us with an expected price for the BF 360 on release; however, the US MSRP will likely be updated due to import restrictions and tariffs, so that may change. That said, in terms of the BF 360 Flow, buyers can expect pricing to start from $189.99(w/o VAT)/€189.90 (w/VAT)/£169.99(w/VAT). That makes the Flow $30/€30/£30 more than the base version, for which you get the three included fans. So, a pretty good deal overall.

That does make it a bit more of a premium pick, which certainly doesn't fit into most budget-builder budgets. It does come at more than most of the top picks on PC Part Picker, such as the NZXT H5 Flow, Fractal North, or even a Lian Li LANCOOL 217. Even the no-fans included version, but at least the Flow is coming in with three pretty powerful fans.

Outside

Having gone over the specs and pricing of the case, now I'll have a closer look at the finer details of the case itself. Starting out by looking around the outside of the case, highlighting any unique features of its design.

Front

The main attraction and most eye-catching feature on the front panel is the stone-like design. Upgrading from the wood that Fractal has on its cases, the HAVN uses a five-layer stacked slate texture effect on the case. Since the case is already heavy as it is, it is just a repainted plastic and not actual stone, so the ridges do have some flexibility to them. That said, it does give the case a refined look and is more interesting than many more-generically designed alternatives.

That brings us on to the first major airflow-tailored design choice - the 'ridges' in the front panel. In the BF 360 Flow booklet, HAVN goes into detail on the various iterations they went through during the design process. The final design, which we see today, came out on top for airflow, providing under 3CFM more than the next best.

Sitting behind the front panel, there is a mesh filter that looks to work as a dust filter. That said, it seems to be more interested in letting air in unrestricted, rather than keeping dust out. Behind this, two impressive H18 fans pull a substantial amount of air into the case, directly over the core hardware. And since they sit rather low down, users can fit a third, smaller fan above to stop any interference from unguided air coming in.

Aesthetics and performance aside, the front panel is held in by magnets, meaning access to the fans is incredibly straightforward. At the same time, fans are mounted on a frame that is held in by two screws, which can also be removed and worked on away from the main frame, something that's more useful for the non-Flow version, where you'll be installing your own cooling with more size variety. At this stage, it's worth noting that the BF 360 Flow only comes with a front bracket compatible with 180mm fans. While this makes sense from a buyer's perspective (as they'll most likely use the 180mm fans included), it does restrict customization down the road - with a new bracket required if you want to fit smaller fans or a radiator.

Rear

Now looking at the back of the case, it's a relatively simple and certainly airflow-oriented design, with some rather large cutouts in the metal sheet coming out from the main chamber. It does have rather prominent rubber outlines for where you can install the rear fan, with the Flow having a 140mm already in place there. Making it easier to know where to install it straight away, while also matching the front slate coloring.

Around the edges, there are plenty of divots in the metal for the range of rivets holding it together, while around the edge are four prominent screws. These screws are what initially hold in the side and top panels, which do stay in place on their own (via a similar magnet system). HAVN has likely done this as a shipping precaution to stop them from jumping out during transit. To remove these, a screwdriver is required. We'd have preferred to see a thumb screw used here, but I suppose it makes no real difference if most users are going to use the case without them.

There are also indents on the edges that make taking off the side panels easier, with a place for your fingers to grip from behind. While at the top, there is a HAVN logo in the same grey color and a fabric loop sticking out above. Users can also find an easy-to-remove dust filter at the bottom of the case.

Sides

Surprisingly, the left side panel is very plain; there is nothing that stands out, as it's just a uniform metal sheet that sits in place. It easily slides in and out as it is placed into the bottom and snaps into place at the top.

The right side offers a bit more visual interest, featuring a glass window set into a partial metal panel. This design aligns cleanly with the PSU shroud, covering about two-thirds of the side panel without extending all the way to the bottom.

Top

On top of the case, you get a rather sleek and rounded edge and panel that seamlessly pulls the case together. But starting at the front, that's where you find the I/O of the case. Integrating an audio jack, a USB Type-C, and two Type-A ports spaced apart rather well, it provides a great level of connectivity without reaching around the back. The power button itself is a rather premium-feeling, indented circle with a light ring in the middle showing the PC power state.

The remainder of the top panel follows a similar design language to the front, with clean, straight lines reinforced by struts and backed by a mesh layer. It’s magnetized for easy removal and includes a convenient fabric pull tab at the rear. Reinstallation, however, requires some care to avoid pinching your fingers between the case and the panel.

Beneath the panel is an excellent fan-mounting system. The frame is secured by two screws on each side, allowing the entire assembly to slide out and lift away for effortless fan or radiator installation. It supports up to three 120mm or 140mm fans, and its removable frame expands further to accommodate 180mm cutouts. This wide compatibility makes it versatile for any cooling layout while also improving radiator support. The design significantly reduces installation difficulty and provides much better access to the top of the motherboard, eliminating the cramped conditions often found in similar cases.

Bottom

On the underside of the case, it's also rather simple. The majority of it is just a plain sheet that continues from the sides of the case and continues in. Only dotted in the four corners by the long rubber feet it uses that are srewed in at two ends. It is an adequate solution that should provide some dampening without harming your table or floor - but it has popped out once or twice when moving it, but maybe that's on me, dragging it around.

The other thing is the cutout for the PSU air intake. Elevating where the dust filter and power supply fans are placed gives it that fresh air without restriction and away from the hot exhausts from the other areas of the PC.

Inside

Taking a closer look at the inside of the BF 360 Flow is where some of the more intricate design features can be found - especially when it comes to thermal performance. Let's dive in.

Main chamber

Taking out the glass side panel, you get access to the main chamber, viewing the main area, which slopes down to the front. At the same time, the back half of the bottom is covered in a permanent basement shroud. It's a very straightforward, open chamber from front to back without anything jutting out or blocking the airflow or buildability inside - well, apart from a little see-saw-like GPU support hugging the back grommet in the middle.

The significant part of the case is the front of it, sporting the two 180mm fans, which direct significant airflow over the main components. HAVN has designed a small ramp near the front of the case, which directs air from the two front H18s straight to the GPU. This, as you can imagine, is quite effective when it comes to thermal performance.

On the other end of the case sits the pre-installed 140mm fan that is acting as an exhaust next to the motherboard IO hole. Below those, there are seven PCIe covers that are being held in with your run-of-the-mill thumb screws, allowing for easy removal and installation of any AIBs onto your motherboard.

As for the main back panel, the majority of it is just a solid metal sheet, with a big cutout towards the top of the motherboard behind the CPU for the ability to change out the cooler standoff if required. But there are also plenty of cutouts for the range of motherboard sizes it supports. It handily also labels each hole with the size of motherboard it supports, so you don't have to guess where to place the standoffs for non-ATX mobos that are already in place.

Surrounding these areas are numerous cutouts for cable management, each fitted with a unique rubber grommet that differs from the standard design. Instead of one opening, they are separated into three sections with rubber pillars across them and with plastic combs separating them in various positions, with more available in the accessories box.

These certainly are a more intriguing way of managing your cables, but it can be a bit restrictive if you've got some thicker cables or ones with lots of tails, like a PCIe one. However, it is a bit more innovative and allows HAVN to implement their GPU support the way they do, sticking out of the bottom grommet in the middle. It has a t-bar with rubber ends that can be moved around and adjusted to the height of your graphics cards.

Back panel

Opening the back, there's plenty of room, and cable management is already in place. First off, in the top left is where the fan controller is installed, combining six fans in one place with power and speed controls. Below that are the two mounted storage bays that each can have one HDD or two SSDs mounted to them, via another convenient sled that can detach from the case and be installed separately.

Underneath those are the pre-routed cables for the front IO and the fan hub. Putting them in place, ready to be plugged in, while the rest of the underside is open and spacious enough for a longer power supply full of cables. The only thing is, a lot of the front is, of course, obscured with the fan duct taking up some of the extra space.

Behind the motherboard tray are some of the more interesting design elements embedded in the case as well. Placed next to the rubber grommets, there are channels already in place for your cables when routing them into the right places. Combined with the intermittently placed velcro straps, it is optimized for great cable management and keeping general cable bulk down.

HAVN also provides relevant labelling in these channels as to which cable should be put where. So if you're maybe a newer builder or one without too much management experience, it can point you in the right direction. With both those factors, it should mean there isn't a spider's nest of cables in the back that might prevent the side panel from closing back up again.

Build experience

Building inside the HAVN BF 360 Flow (right out of the box) is a pretty tough experience, considering the case has a net weight of nearly 15kg. It's not exactly one that's easy to move around. But once the panels were off and I set them down, it became a lot easier to utilize and actually start building inside.

It is worth noting that the accessories box is found in the top foam inside the box, and so if you open it from the bottom like we did, you may miss it at first. Once everything is in place, installing the motherboard is straightforward. The spacious interior provides plenty of room to slide the motherboard in without obstruction. The standoffs also do not protrude, making the motherboard easier to align and screw in.

That leads me to the very convenient organization of the baggies and accessories, making it a lot easier to install since they are labeled and tell you what they're for. This made finding the right motherboard screws a lot easier - and without having to guess which ones to use. It does get a bit tight on the left side with the rear fan pre-installed, but it was also the Strix X870E-E motherboard I was using that had a guide there.

Once that board was in, we turned the case around, and there was plenty of space and convenience to utilize. With the bottom section being totally open, it's easy to place the power supply and screw it in, even with all the long cables coming out of its front, since there's nothing in the way until the front, where the air duct sits.

Then, routing the cables, there are some rather convenient management channels and velcro ties already there for you to take advantage of. Using those, I routed around the various power cables that made it all very simple to put them in the right place, even following their advice in the channels.

The rubber grommets did take some adjusting to, and a bit more precision was required when inserting cables through them. They are also a bit tougher to put back in place compared to normal, since they have cutouts you push them into on the edges.

Overall, the layout keeps the rear section neat and organized while routing all the necessary connections, including the front panel. Even the choice to use a single consolidated connector instead of multiple separate ones is a small but welcome detail that makes the build process easier. The only real challenge was threading the PCIe power cable into the correct position for the graphics card.

Since I was using an ROG Astral RTX 5090 and my PSU didn't have a native 16-pin connector, I had to try to fit through an adapter. Since it's not long enough to just come through on its own, I did have to pull it through - alongside the four cables. There also isn't a convenient spot to do it; some cases feature a cutout closer to the PSU that would make it easier to connect at the front, but instead, it had to come from above the main channel, or below at the back under the motherboard.

I ultimately had to route it from the motherboard side, pulling it through the grommet along with several other cables since it occupied so much space. This required quite a bit of effort, but after some trial and error, I was finally able to install the GPU and connect it. However, the remaining space was tight and difficult to work with.

Since my choice of mobo uses the third PCIe slot down for its x16 Gen 5 slot, and I had a near four slot GPU in it, that left me with little room to handle the cables and the support installed on the channel. That made it rather hard to maneuver them and make sure they weren't blocking the fans, particularly the thick cables, without using cable ties to hold them down.

Then I had issues with the pre-installed support bracket; I don't think they had this massive GPU in mind. Since, at its lowest point, it was already interfering with the GPU fan, and it was ridiculously hard to put in the right place. It required considerable bending and careful positioning along the edges of the fans - a method of GPU support I’m not particularly fond of. If the bracket shifts over time, it risks obstructing the fans, which could lead to cooling inefficiencies or unwanted noise issues.

It was only after removing the front fan and putting my hand through the front panel that I could more easily put it in where it should be. That's after plenty of swearing and losing the rubber pieces sitting on the edges, so having to put them back on as well.

After that, I also tried a load of different fan configurations, and the top bracket has a very convenient setup for doing it. Since you can take the whole metal frame out, you can install the fans or radiator and then slide it in, reducing the inconvenience of reaching in or any compatibility issues with things bumping into each other, and also allowing for a wide range of support. Plus, the use of a fan hub adds to the ease of routing cables and plugging them in.

So after quite a battle through the choice of my components, the build was actually quite good. The build quality and design made it easy and convenient to build and use; there are just some components that might not be as easy to use. It's ok though, because after all of that, my build ran into technical problems and I had to rebuild a different one anyway.

Fans

Alongside the case, HAVN is introducing its H series fans, designed to improve airflow throughout the case. These range from the H18, H14, and H12, which each have their respective diameters of 180, 140, and 120mm with a thickness of 40, 30, and 30mm.

Some of the highlights of the fans include a harmonized flow design that ensures the shaped hub and blade edges work to smooth out airflow and reduce high-pressure zones for reducing noise and improving aerodynamic efficiency. Along with improving the fluid-dynamic bearing design to a triple groove, it aims to prevent oil leaking and extend its lifespan, which works well in the thick 40mm version for the 180mm fan that also delivers axial stability and durability.

In the case of the materials used, it's a 30% glass fiber reinforced composite to improve the rigidity and strength under high stress conditions. That's rather necessary when it comes to the longevity of the fan, as the blades can extend over time and affect performance.

It also adds a Loopin cable system, which adds a female port to its cable so you can daisy chain multiple of them together to more easily connect the fans up without clutter. Along with adding rubber pads to the screw holes, it should minimize vibration and reduce any acoustic resonance.

All that R&D, paired with a more premium build and excellent materials, certainly doesn't help with the pricing. Below is a breakdown of the available packs and how much they cost, but individually, a fan costs a minimum of $18.99/€18.90/£16.99 - so it's definitely a premium option. That's even with them not being RGB fans, and putting them in line with some RGB Corsair or similar fans.

Performance

Once everything had been installed, I put the system under load in our testing lab. Running Furmark 2 stress test on both the CPU and GPU for twenty minutes puts it under full load and at thermal capacity, a scenario you're quite unlikely to reach in normal usage. But with a Ryzen 7 9800X3D and RTX 5090, it has plenty of Wattage to contend with.

The CPU reached a peak temperature of 90°C, which is certainly hot, but it never hit thermal throttling. This result may be influenced by the performance of the AIO cooler, though it’s also possible that the GPU’s flow-through design - with its additional rear fan - is directing a significant amount of warm air toward the CPU.

In the case of the graphics card, it does, in fact, run cooler than in our ROG Astral RTX 5090 BTF OC review. Still reaching 600W, the fans were only running at 60% max with an RPM of 1,700, and it maxed out at 65.5°C, with the memory junction at 66°C, and the memory reaching 63.7°C.

In comparison, on our test bench in the open air with two fans blowing air over it, the GPU reached 68°C, and the memory reached 70°C instead. With 66% utilization and 2,000RPM, the case does enable the GPU to run more quietly and slower, prolonging its lifespan.

As for the motherboard, which reached 36.5°C maximum temperature and didn't really seem to get too hot, the power delivery and M.2 NVMe shouldn't struggle with being heated up.

During this time, the case fans connected to the motherboard were set to standard, and it does get a bit loud with the amount of airflow going through it. But with headphones on, it isn't particularly noticeable and doesn't produce any whistling or any unpleasant higher-pitched noises.

Airflow test

Conclusion

Overall, the HAVN BF 360 Flow makes quite the impression. A high-performance case, it features a top-end build and well-designed materials, with plenty of innovative and intriguing design features. Implementing a uniquely designed front panel and optimizing airflow, it's a great option for performance and looks, but it does come at quite a cost, even if you opt for the one without fans included. But for that price, you get a well-thought-out design that makes building in it a pleasure and all the easier with some simple cable management.

It's not just looks, though, as it adds cooling and plenty of custom hardware and software to the mix to create this miniature case. With practical uses including an expanded IO and keeping temperatures down, it is a great kit. I enjoyed putting it together. Plus, after installing its software, the screen and lights make it a joy to have on your desktop.

Of course, it's not the ideal solution for those needing their Raspberry Pi 5 for any other project, and it does take some time to put together. Along with not being the easiest things to put together or cable manage, it is a rather unique case for the Pi. So here's my review of the Pironman 5-MAX case after assembling and running it.

What you get

When you order and receive the Pironman 5-MAX case, there are a bunch of items that come in the box. Here's what you can expect from the base version.

There are also optional extras that you can order from SunFounder to install into the case and the Raspberry Pi, which we received for this review as well. These include:

Assembly

As soon as I started getting everything out of the box, I realised just how much you get with the case itself. Being a barebones case you build up yourself, it's nothing like a full PC case, or at least the most common ones. Instead, you build up everything from the bare bones and each component separately.

To start off the build, you start by unscrewing the metal plates. Separating the two segments might seem counterproductive, but it does mean getting easier access to each of the points of installation. That's the start of trying to keep track of each screw and component.

Particularly with so many various standoffs that are provided, and a couple of screw options, it does take some time to pick it out and double check it's the right screw. That's what probably added to the time it took me to build out this system, and the fact that there are quite a few fiddly options to decide upon.

That's not to detract from the instructions and labelling; each of them is labelled well enough to get it built. Except for when there's a bunch of holes on the plates, and it might just take a sec to figure out which one the instructions want you to fit them to. It also lacks some of that depth, being a printed sheet, such as in step 16 of installing the NVMe PIP, and having to align the 4-pin header extender from the board below, which was a pain to do.

Another fiddly part of the installation can be the thermal pads, FPC cables, and those smaller parts, particularly with my rather large fingers. But utilizing tweezers and lining things up beforehand makes it a lot easier and certain. As the likes of thermal pads are sticky and a bit fragile, I was rather careful in making sure to stick them onto the right component.

Some of the FPC cables were particularly hard to work with as well. Apart from installation into their respective ports, some of the routing is difficult; for me, that was the AI camera. The case comes with a smaller cable to use and route through the rear of the case. With the slot rather small, it was hard to get through there to connect to the camera, maybe it was my mess up, but trying to pull the cable through with tweezers, I did end up tearing it and having to replace it with teh camera's original one, so its not exactly the most friendly way to install.

Once it comes together, though, it's a very satisfying build. It did leave me with the satisfaction of completing it, and it felt very guided. Even if I had to figure out some things that went wrong, it didn't feel like I was lacking help. Standing it up, it does just look like a standard PC now as it awaits me figuring out the Raspberry Pi boot up and initialization.

Design and quality

The design of the whole case is rather impressive. With all the custom-printed PCBs and components from SunFounder, it is a very well-designed system. All of it slotting together, and with the pieces such as the power switch converter that uses spring-like connectors to keep pressure and touch, there are some engineering choices that make it easy for builders to utilize.

It is fantastic that they manage to provide all of this in a contained package. Even without tools, you get given everything you need to build it up. Including the range of custom solutions, it is well-built with all the pieces going together rather seamlessly. Considering the small form factor it utilizes and stacking components on top, the design is exceptionally thought out.

There were still a few parts here and there that had issues, or there were some things that could be a bit frustrating. Like the fact that I came across one screw that was seemingly too small and wouldn't screw the fan in, and I had to use a different one. Then the acrylic protective stickers on top were a bit of a pain to remove as they didn't come off seamlessly around the lettering.

If you also opt for the camera, it just weirdly gets left alone and dangling out the back. You kind of have to find your own solution to affixing it, as there's nothing the Pironman 5 Max comes with to install it; rather, that's left to your own devices.

Those are some rather small things to nitpick compared to a relatively excellent build in general. When I have to highlight some small details, the rest is rather impressive. Like the OLED screen that is handy in providing readouts, even if waking it from sleep does require slapping the machine via the vibration sensor. That kind of highlights the ingenuity and ability of the case as a standalone system.

Pironman software and features

While you get the case and RGB fans included in this set, they - alongside the screen - do need the custom code to work. You have to install the pironman5 module to get the system set up and running, as the following will run on your boot after you do that.

You can then access the commands and control it via the terminal. But there is also a handy dashboard you can check out that is a page-based showing of what the OLED screen displays, accessed via:

Providing the screen on the case with this data gives a unique look and feel to the case. With a quick tap, you can see the utilization and temperature of the CPU and hardware. Either for a good purpose or for a fun gimmick, it's integrating it right on display.

The service also controls the lights, and there are plenty of them inside. The fans and lights shine out of the case and do give you a good range of ways to change them up. Giving the whole case that gamer 'feel', and a delightful look in general.

It also allows you to turn off the on state for the GPIO when the Raspberry Pi 5 is shut down, which means you won't have a massive RGB light shining out even when it's meant to be off.

One of the other suggested uses and options is setting up OpenMediaVault on the device. Turning the system into a NAS rather handily. Along with the ability to use the Pironman 5 in Home Assistant, it is a surprisingly versatile computing device.

Price

The price of the Pirnman 5-MAX is dependent on what you want included, but the base model is available for just $94.99 on both Amazon and SunFounder's site. UK pricing is slightly less on their site at £70.23 compared to Amazon's £86.51.

Once you load everything else up, though, it quickly skyrockets. That's, of course, if you also decide to use everything they offer, like the Raspberry Pi 5. With that, our setup came to a total of $494.96/£365.9, including the extras, two NVMes, and the Raspberry Pi 5 itself.

That's definitely a more expensive case, even on its own. It's on the high-end solutions for custom options, but it is rather impressive and has its own hardware and software, so it sort of justifies the cost. There is also a cheaper, smaller option in the Pironman 5-Mini that comes in at $45.99/£34.08 or Pironman 5 standard at $79.99/$59.27.

Conclusion

The SunFounder Pironman 5-MAX was an enjoyable DIY project to build out the Raspberry Pi 5. Adding plenty more functionality and expansions to the system, it's a lot more than just a case. Even if it's a bit expensive and takes some time, it has a lot more to offer than just a standard case.

The OLED screen, RGB lights, active cooling, HDMI expansions, and all the other extra pieces make for a great desk setup for the Pi, while still giving you access to the GPIO and the ability to use it like a normal Pi. Even for a bit of a newbie like me, it was a great kit, not without its downsides, but still an excellent kit to enjoy.

We'll use these measurements as a benchmark because this GPU has better specifications than the 9070, meaning it requires a more robust cooling mechanism. Therefore, any PC case that can house the RX 9070 XT can also support the RX 9070. This means that the chances of it being larger due to accommodating better cooling solutions are higher, so any PC case that can house the RX 9070 XT should also be able to handle the RX 9070.

Besides that, most of the PC cases have plenty of GPU clearance, and not even the RTX 5090 could give them trouble. However, it is always better to have more room as that means you can fit more fans to an efficient airflow, and the third-party variants of these cards could take up more space as that is generally the pattern we see. 

Here are a few PC cases that caught our eye, but plenty more options are available, so be sure to check out various retailers as well.

Products at a glance

How we picked 

To select the best pc case for the RX 9070 XT and RX 9070, we considered their size and then selected a handful of cases based on their price, connectivity options, design, aesthetics, included fans, and maximum GPU and radiator size support. These factors allowed us to recommend what we think are the best cases in the short and long run.

Our top picks

After searching the market, we found the Antec C5 ARGB PC case, and we think this is one of the best cases for RX 9070 XT and RX 9070. For starters, this is a dual-chamber PC case that ensures optimal cooling and cable management with 95mm of space available for that. 

Besides that, it offers a 270°C view, which is very aesthetically pleasing as all the lights and components are visible from the front and the side. A neat aspect of this case is its cutouts that accommodate back-connect motherboards. These motherboards have connections on the back than the front, giving them a “wireless” look. The MSI B650M Project Zero is a back-connect motherboard we've reviewed. 

You also save plenty of PC case fans as this casing comes with 7 x 120mm ARGB PWM fans. What this means is that the only area left to cover is the top, which can accommodate a 360mm radiator. The side and bottom support 280mm and 360mm radiators, giving you plenty of orientation options. 

The maximum GPU clearance of this PC case is 410mm, which is more than enough for the RX 9070 XT and 9070. And even if third-party variants push the length to 300mm or above that, it still wouldn’t be an issue. However, to ensure that the GPU doesn’t collide with the fans or radiator on the side, its height should be less than 75mm. 

There is a built-in ARGB and PWM fan controller to control the accompanying seven fans, which can synchronize the lighting effects with the motherboard or turn them on via an LED control button. 

Overall, this is a pretty great case for the RX 9070 XT or 9070, and the only downside is that it might be a bit expensive for some, but a white option is also available that costs less. 

What users say

According to Amazon reviews, this PC case has great value for money, fan capacity, aesthetics, and build quality. One reviewer said: “I didn’t expect this case to be this good especially for 110 dollars. It’s easily compared to the Lian li case without it being 200 dollars and it comes with 7 Rgb fans with a fan controller that the Lian li case doesn’t. It looks very good quality and the Rgb is great too. The airflow is amazing with removable dust covers and it comes with a ton of extra screws.”

For the optimal airflow to keep the RX 9070 XT or RX 9070 running cool, we recommend you check out the NZXT H6 Flow. This PC case comes with three pre-installed 120mm fans mounted for optimal cooling performance. 

A great aspect of this case is that no tools are required to open it. The Top and sides can be removed by hand, meaning if you’re cleaning it or want to adjust something inside, you can do so quickly. In addition, the top supports a 360mm radiator, and the maximum GPU clearance is 365mm. 

What this means is that if the 267mm GPU length for the RX 9070 XT is accurate, you’ll have plenty of space inside this PC case. The front right has three 120mm fans installed, which can run at 1200 RPM max. 

Besides that, it supports 2 x 140mm fans on the bottom and 1 x 120mm fan on the rear. So, the side and bottom fans can pull in the cool air, and the radiator and rear fan can expel the hot air, ensuring optimal and efficient airflow. 

This casing also comes with straps and features wide channels for easy and efficient cable management. It also has two expansion slots for a 2.5” SSD and one slot for a 3.5” HDD. Overall, this is a stylish mid-tower PC case with plenty of features and high-end I/O capabilities, and its GPU clearance makes it a great option for the upcoming Radeon GPUs. 

What users say

According to Amazon reviews, this casing has good space, build quality, and airflow. One reviewer said: “This was a perfect case for my new gaming build. fit a 4080 super and liquid cooling for my cpu. I got a cpu that runs pretty warm but I've had zero issues when running it this case! The glass panels are high quality and easy to remove and reinstall.”

If you’re looking for a PC case that doesn’t take up a lot of space or finances, the Cooler Master MasterBox Q300L is for you. This is a mATX PC case, but despite its small size, it has a 360mm GPU clearance, meaning it should easily support the RX 9070 XT or RX 9070. 

The first aspect that stands out is the outlook of this PC case and the patterns on the front and top, which seem like they are on the build but are actually on the magnetic dust filters. Besides that, it can accommodate a CPU cooler with a height of 159mm and a PSU with a 160mm length. 

When it comes to the fan settings, this casing can house 2 x 120mm fans on the top and the front and 1 x 120mm fan in the rear or the bottom. However, the front also supports 140mm fans or a 240mm liquid CPU cooler. 

A unique feature of this case is that the I/O panel can be mounted at the front, bottom, or side on both sides of the PC case. While you might think that is a weird addition, it makes more sense as this casing can also be used horizontally, meaning where you place the I/O panel affects how easily you can access it. 

Overall, despite being a micro ATX PC case, it has plenty of unique features and should be able to accommodate the RX 9070 XT or RX 9070 easily without any issues. 

What users say

According to Amazon reviews, the Cooler Master MasterBox Q300L has excellent value for money, build quality, looks, and space. One reviewer said: “Cost friendly, light weight, excellent airflow, fits everything great. The mesh style walls makes it easy to place fans however you would like. Liquid coolers fit perfectly. Wire management is great with these cases. Super easy to feed wires, easy to disassemble and reassemble.”

How to choose the best case for RX 9070 XT and RX 9070

The GPU clearance is the main factor you need to consider before buying a PC for the RX 9070 XT and the RX 9070. This should tell you whether the case can comfortably house any of these GPUs without cramping the space. Besides that, we've listed a couple of other factors below.  

Budget

The first step you need to take is to filter the available options based on your budget. This will give you a list of products that won’t break the bank but also have good features. Many PC cases come with built-in RGB and case fans and also feature high-end connectivity options; however, if you’ve got a good motherboard, you can probably skip out on scoring a case with plenty of USB ports as you’ll have those in the motherboard.

This will help save you some money, which you can use to get 140mm PC case fans or a good AIO cooler for your processor. 

Airflow

An important aspect to consider is the airflow. It goes without saying that more airflow is better as it keeps your components cool, so selecting a PC case that supports plenty of fans and has good air inlets is crucial. This will ensure the airflow isn’t restricted, and you can direct it any way you want by switching the positions of the PC case. 

For example, three in the front are pulling in the cool air, two on the top, and one in the rear to expel the hot air. This is the most common PC case fan orientation.

What is the recommended GPU clearance for RX 9070 XT and RX 9070?

The RX 9070 XT's length can vary between 289mm and a maximum of 331mm, which is also the maximum length for the RX 9070. So, depending on the variant you get, it'll be different, but as a standard, ensure that the PC case you're looking at has a GPU clearance of more than 330mm to promote adequate airflow and cooling.

Will a small case affect cooling?

A small casing has less space between the components, and if the components barely manage to fit in, it means the space is cramped up, and the airflow will be restricted. The heat generated by the GPU, CPU, and other components won't be expelled efficiently, leading to a rise in temperature, which will impact the performance of your system.

So, a small case will affect the cooling, and to avoid that, we recommend using an AIO cooler if the case can support that and ensure a good amount of clearing for the GPU.

But, if you have got one, or are planning on grabbing one when the universe allows, we've got everything you need right here to pick the right case for both cards.

Now these cards are slightly smaller than their predecessors, as the RTX 4070 has a 244mm length and 112mm width, while the 5070 has 242mm x 112mm (LxW), according to the Nvidia listing.

Currently, it looks like we will get an RTX 5070 Founders Edition, according to Nvidia RTX 5070 page, but that doesn't seem to be the case with the Ti. This means that for the Ti, you should expect some variation in size, but that also goes for the 5070 too. Even a quick glance at some of the currently available AIB models turns up much larger editions than the Founders Edition. Case in point, this ASUS PRIME GeForce RTX 5070 is SFF compatible, and comes in at 304 x 126 x 50 mm - both longer and wider than the FE.

Either way, most PC cases should give you enough room to accommodate either 244mm or above 300mm, but we'd say since these cards are pretty powerful, it's worth going for a case that allows for loads of airflow and multiple fans. That being said, make sure you check everything before making your purchase, especially for the RTX 5070Ti which may come in bigger as standard.

Here are a few PC cases that we though stood out from the crowd, but of course, the world is your oyster!

Products at a glance

How we picked 

To select the best pc case for the RTX 5070 and 5070 Ti, we first took into consideration their size and the expected size of third-party variants and then selected a handful of cases based on their price, connectivity options, design, aesthetics, included fans, and maximum GPU and radiator size support. These factors allowed us to recommend what we think are the best cases in the short and long run.

Our top picks

We recommend checking out the Corsair 7000D Airflow PC case if you’re looking for the best option for the RTX 5070 or 5070 Ti. It features a robust black design with a mesh grill in the front that promotes good airflow. 

This PC case comes with three 140mm Corsair AirGuide fans. These fans utilize anti-vortex vanes to direct the air into a funnel-like shape, which helps it reach the components more efficiently. Thus, you can save some money on 140mm fans and get good cooling. However, these fans don’t have RGB, so if you want that, you’ll have to purchase them separately. If you’re interested in checking out some options, our best RGB fans guide has the top picks. 

This PC case has plenty of space inside to install a cooling solution. In the front, you can mount three 140mm fans, four 120mm fans, one 420mm radiator, or one 480mm radiator. On the top, it can hold three 120mm or 140mm fans, one 360mm radiator, or one 420mm radiator. At the back, it can accommodate one 120mm or 140mm fan or radiator. 

So, regardless of how much heat your components are generating, if this casing is decked out with all the cooling solutions it can support, you probably wouldn’t have to worry about your GPU overheating. 

The RTX 5070 FE has a length of 242mm, and it doesn't look likely that third-party variants will be too long for this case, as it has maximum GPU length of 450mm. On top of that, it features a built-in three-slot vertical mount, meaning if you plan to mount the 5070 to 5070 Ti vertically, you wouldn’t have to buy a mounting kit; you’ll only need to purchase a riser cable. 

Regarding connectivity options, which are important as not everything you want to reach around to connect a USB to the motherboard ports, there are four USB 3.0 ports, one USB 3.1 Type-C ports, and a 3.5mm audio jack. 

This PC case allows you to connect multiple peripherals, charge your mobile with the Type-C port, or enjoy high transfer speeds. It is also easy to set up as the side panel is on two hinges that easily open up, meaning you don’t have to fiddle with screws, and it's the same for the 4mm tempered glass. 

It can also house four 2.5” SSDs and six 3.5” HDDs, so you have plenty of options for adding more storage besides the best NVMe SSDs that fit on your motherboard. Overall, this is a beast of a PC case with plenty of support for storage options, cooling solutions, and it should be able to easily house the RTX 5070 or 5070 Ti without any issues. 

What users say

According to Amazon reviews, this casing has top-notch build quality, design, accessibility, capacity, and airflow. One reviewer said: “This has been my favorite case ever to build in. It's just ... easy. Cables are truly manageable. The hinged sides are great. The ability to customize is beautiful. You can add so many drives or remove the bays entirely. Tons of options for cooling. Lots of room for airflow. I've been using it for a few weeks now and things stay cool.”

If you’re looking for a PC case that offers something different than traditional casing for the RTX 5070 or 5070 Ti, check out the HYTE Y60 Snow White. This is a dual-chamber ATX PC case with a panoramic view. 

However, what sets it apart from others is that it comes with three 120mm fans and a PCIe 4 riser cable. Yes, this PC case is built to mount your GPU vertically only. That being said, RTX 5070 and 5070 Ti have PCIe 5 connectivity, so you might have to purchase a separate PCIe 5 riser cable to experience the full capabilities of these graphics cards. 

It also supports ITX, mATX, ATX, and E-ATX motherboards with ATX PSUs up to 235mm in length. Regarding the GPU capacity, it can accommodate 375mm in length and 75mm in height. Good for the RTX 5070 Ti, but probably a bit better for the RTX 5070 FE.

When it comes to cooling solutions, it supports two 120mm or 140mm fans with a radiator on the side, one 360mm radiator or three 120mm fans, one 280mm radiator or two 140mm fans on the top, one 120mm fan in the back, and two 120mm or 140mm fans on the bottom. 

There is also a slot beneath the GPU's mount through which you can route the power cables, making cable management much easier. Besides that, it has one HDD sled and another, which can house two 2.4” SSDs. 

All in all, this is a good PC case, with plenty of space inside, great aesthetics, and offers something unique. While vertically mounting a GPU might not be for everyone, it can look good, especially if your GPU fans have RGB fans that sync with the rest of the lights. 

What users say

According to Amazon reviews, this casing has great aesthetics, build quality, airflow, and cooling capacity. One user stated: “So I'm currently starting my journey in building my first pc. I wanted to go with this case because i love the look of it and its ample air space. It definitely shows it. In person, it's much bigger than i originally thought. But it is a great looking case! I can't wait to buy the rest of the parts and put it together!”

For those operating on a budget and want a good PC for their RTX 5070 or 5070 Ti, we recommend checking out the MUSETEX G07 PC case. This is an ATX casing that comes with 6 PWM ARGB fans installed, meaning all you have to do is make the relevant connections, and you’re good to go. 

However, to control the fan speed and lights, ensure your motherboard has a 3-pin RGB interface. These fans can also be automatically or manually adjusted via motherboard software, meaning you can set your custom fan curves depending on the workload. 

The tempered glass on the side has magnetic hinges, making it easy to open, install, or change any component. This comes in handy when you’re troubleshooting an issue and don’t have to screw on and off the panel again and again. 

This PC case can accommodate a 280mm radiator at max on the top, three 120mm fans in the front, two 120mm fans on the bottom above the PSU compartment, and a 120mm or 140mm fan on the rear. Since this casing comes with 6 120mm fans, you’ll only have to purchase two more 120mm or 140mm fans to kit it out. If you’re interested in exploring some options, check out our best 140mm fan guide for the top picks. 

What this means is that there is a good capacity for cooling solutions in this PC case, which should keep your GPU and other components cool as the heat would be efficiently removed. As for the GPU capacity, it can support a maximum graphics card length of 320mm, which is much more than what the RTX 5070 or 5070 Ti would need. 

So, you can rest easy knowing that you’re getting a decked-out PC case with good features. Best of all, your GPU would have plenty of room to breathe. What makes it even better is the price point, making it affordable for anyone with an RTX 5070, 5080, or even a 5090. 

What users say

According to Amazon reviews, this casing has excellent value for money, aesthetics, accessibility, and build quality. One reviewer said: “For a mid tower case this one here would be tough to beat... especially for the price and options. 6 ARGB pwm fans, good cable management design, wide enough for cables, clear tempered glass door that swings open... that I like, magnetic door latch 👍... oh and the feet at the bottom are not snapped in like other cases, these are held on by screws!!”

How to choose the best case for RTX 5070 and 5070 Ti

There are a couple of factors that you need to consider before buying a case for the RTX 5070 or 5070 Ti. This is important because airflow is a big factor to remember, as a restricted airflow can cause heating issues. So, we’ve listed a couple of them below. 

Budget and airflow

The most important aspect to consider before buying any component of your gaming PC, including the PC case, is your budget. Many casings have fancy features, RGB lighting, and designs, but these factors will only increase the cost with minimal impact on performance. 

So, we recommend filtering them based on budget and selecting a PC case that can house multiple fans, promoting good airflow. This will ensure that the heat generated by the GPU is efficiently redirected, keeping it and other components running cool.

Compatibility

The second factor to consider is the compatibility of the PC case. This means checking the internal measurements of the case and whether it can comfortably house an RTX 5070 or 5070 Ti. This will ensure that you don’t get a PC case that can’t hold these GPUs or that the space is too cramped, resulting in bad airflow. 

In this case, bigger is better, as it means you’ll have enough space to mount your GPU vertically if you want. A larger PC case can also hold 240mm, 360mm, or 420mm radiators with plenty of fans.

According to Nvidia's official specifications, the RTX 5080 is a decent-sized card, as the Founders Edition measures 304mm in length and 137mm in width, the same as the RTX 4090 and RTX 4080. There are plenty of other third-party RTX 5080 GPUs also heading our way, which are either slightly larger or smaller (such as the Gigabyte Aero for instance). Due to these dimensions, fitting the card inside a micro-ATX case is pretty much out of the question, as it won't be optimal for cooling.

If your case already houses an RTX 4090 or 4080, you won’t need to upgrade it. But if you're building a PC from scratch or your current case doesn't support these dimensions, you'll need an ATX mid-tower case. However, you need to choose one that not only fits large GPUs but also offers good airflow, supports multiple fans, and has enough space for other components and storage devices.

To help you kick off the search in the best possible manner, we've selected what we think are the best cases to pair with the RTX 5080.

Best cases for RTX 5080

How we picked

For this list, we conducted extensive research and explored several options from popular brands. We considered factors such as case size, features, price, and design. Most importantly, we only included cases with a maximum GPU length of at least 360 mm to ensure compatibility. After all, we don’t want you to buy a case only to find out it can't fit your GPU. We've also listed the pros and cons of each product to help you make an informed decision.

The first case that we'd like to recommend for the RTX 5080 is the ASUS TUF Gaming GT502. Just as what you'd expect from a TUF product, this case has a very strong look and offers an all-black theme, with the TUF logo and some text on the front.

The GT502 features a panoramic view with tempered glass. Unlike most cases that only have glass on the side, this one also includes a front glass panel, offering a full view of the main chamber. This improves the overall aesthetics of your build and allows you to admire your components without removing anything.

Another interesting point to keep in mind about the case is that it offers a dual-chamber design. This means that its internals are divided into two chambers, allowing you to set up independent cooling zones for the CPU and GPU. This will also help with cable management as you can keep the cables on separate sides.

For cooling, the GT502 supports up to 13 fans, with two 140mm or three 120mm on the top, one 120mm on the rear, three 120mm on the bottom and side, and two 120mm or three 120mm on the right. On top of that, the case also supports a 360mm radiator, which you can place in the rear chamber, on the top, or on the right side, depending on your requirements.

With the GT502 supporting up to 13 fans, you won't have to worry about the components overheating due to poor airflow.

As far as the GPU compatibility is concerned, the GT502 supports a max length of 400m, so you will be more than fine with a third-party RTX 5080 or the Founders Edition. While you can place the card directly on the motherboard and get rid of sag with the help of a support bracket that comes included with the case, you can also vertically mount the GPU inside the GT502.

The case comes with a USB 3.2 Type-C and two USB 3.0 ports on the top, as well as a headphone and microphone port, allowing you to connect devices like external HDDs, keyboards, and other peripherals easily to the system. There are also two TUF gaming-style woven straps on top that can support a weight of up to 30 KG or 66 lbs, which will help you move around the system easily from one place to another. And finally, thanks to its fully modular design, you can remove most of the panels and mounting components inside the case, making hardware installation easier for everyone.

What users say

Most of the reviews about the GT502 on Amazon have nothing but good things to say about the case. Users love it because of its airflow, design, and build quality. One of the reviewers said, "This pc case is a beast that makes my 3090ti look small. Built with quality that’s for sure! Glass and back panels remove easily and feels durable. The way this case is built, it allows you to access areas that would normally be annoying in another pc case."

If budget isn’t a concern and you want a premium case with the latest features and RGB lighting, we recommend the Fractal Design Torrent RGB. Unlike the first case on our list, which comes in black, this one features an all-white design.

For starters, Torrent comes with a tempered side panel and an open grille on the front. The side panel provides a clear view of all the major components, including the CPU, GPU, motherboard, cooler, and RAM. On the other hand, the open grille isn't there just for the aesthetics. Instead, the case comes with front and bottom nylon filters, which you can keep on for dust filtering or remove for higher airflow, with the grille making the airflow even better.

The airflow is further optimized thanks to the five Dynamic X2 PWM or Prisma RGB that come pre-installed in the case. Two 180mm fans are on the front while three 140mm are on the bottom. These five work together to deliver the best performance possible while keeping the noise low. However, if you wish to install three smaller fans, then you can use fan brackets on the front, which won't ruin the airflow.

When it comes to compatibility, the RTX 5080 can easily fit inside the Torrent as it supports a max GPU length of 461mm in total, and 423mm with a front fan mounted. In short, you'll be more than fine with it. Aside from that, the extensive intakes and the extra-large bottom fans will also help keep the GPU cool during extended gaming or productivity sessions.

With five-preinstalled fans and a max GPU legnth of 461mm, the Torrent shapes up to be an excellent case for the RTX 5080.

A unique feature of this case is the top-mounted aerodynamic PSU shroud, something that is rare to see. This means that instead of throwing the power supply on the bottom, you'll place it on the top. The shroud also comes with ARGB light, further complimenting the RGB fans and improving the aesthetics of your build. Cable management in this case is also pretty easy, and this is all thanks to the removable top bezel and side panels, cable guides, and cable straps.

When it comes to connectivity, the case offers two dedicated 3.5" drive mounts, four dedicated 2.5" drive mounts, and seven expansion slots. Aside from that, on the front, you'll find one USB 3.2 Gen 2x2 Type-C port and two USB 3.0 ports.

What users say

Most of the reviews about the Torrent on Amazon are positive, with many praising its design, airflow, and ability quality. While explaining how good the case is, one reviewer mentioned, "This is my favorite case to have built-in. It's aesthetically beautiful, the airflow is phenomenal, the build quality is very high and the layout is nice. I bought it for the airflow, but love everything else about it."

We understand that not everyone has a high budget for a case. If that's the case for you, we recommend the Corsair 4000D Airflow. It's a great option for those seeking a case for around the RTX 5080 at about $100. Despite being budget-friendly, it’s still a solid case that offers decent airflow.

The 4000D is an ATX Mid-Tower case, so it’s similar in size to the two cases mentioned above. It also features a tempered glass side panel, allowing you to view all the components inside without removing any panels. Aside from that, it has a mesh front panel to help prevent dust buildup inside the PC.

The case comes with two Corsair 120mm AirGuid fans, which use anti-vortex canes to concentrate airflow and improve the overall cooling of the system. While you'll need more fans for better airflow, it's great to see that Corsair has included at least two of them in the case. The 4000D can also support a 360mm radiator on the front or a 280mm radiator on the roof.

For anyone on a tight budget, the Corsair 4000D offers excellent features and can accomodate the RTX 5080 without any issues.

You also won't face any issues when it comes to cable management, as the CORSAIR RapidRoute system helps with routing all the major cables through a single channel. Aside from that, you'll also find 25mm of space behind the motherboard where you can store all your cables, which will help with keeping the overall look of your rig clean.

The Corsair 4000D can support a maximum GPU length of 360mm, so you'll be fine with third-party models of the RTX 5080. Just make sure you're not getting anything above this. Aside from that, it offers seven horizontal and two vertical expansion slots, as well as two 3.5" drive bays and two 2.5" drive bays.

What users say

According to the reviews on Amazon, the case offers an excellent design and airflow while having a strong build quality. One of the reviewers mentioned, "I love the finish of the metal, I got the black version, and I appreciate the matte metal finish, no blemishes were on mine, and the tempered glass is a nice tinted kind and also nice and hefty, so I like the overall build quality of this case."

How to pick the best case for the RTX 5080

Selecting the best case for the GPU isn't just about visiting the market and picking up the most expensive model available. Instead, there are several factors that you should consider before hitting the buy button, and you can learn about a few of them below.

GPU compatibility

PC cases come in various shapes and sizes, so you need to choose one that can easily accommodate your GPU. For example, the RTX 5080 Founders Edition measures 304mm in length and 137mm in width, while third-party models can be as long as 360mm. Make sure to pick a case that can support a GPU of this size. If you plan to install a radiator at the front, opt for a case that can support a maximum GPU length of around 400mm or more.

Design

Make sure the case you choose is well-designed. If it’s just a block of metal with no proper vents or enough space for fans, your components could overheat. So, make sure the PC you're getting has spots for fans on the front, back, and top. Some cases also support fans on the bottom, which makes things even better as they can help keep the GPU cool. Aside from that, if you want a complete view of the system, make sure to get a case with a tempered glass panel on the front and not just the side.

If you're considering buying a 5090, the size will be one of the significant considerations. Now Nvidia's GPU (the Founder's Edition) has a length of 304mm and a width of 137mm, making it a 2-slot card. So, it may not be the most difficult to install. That being said there are plenty of RTX 5090 AIB graphics cards also that come in various shapes and sizes, especially with brands such as Gigabyte, MSI, and ASUS.

We've picked some cases that are worth pairing with the RTX 5090, based on its dimensions. Most times, it is smaller MATX cases that might struggle to fit the longer cards in, so, be sure to double-check GPU length compatibility before you settle for your option.

You could, of course, skip the process entirely and go for one of the RTX 5090 prebuilt gaming PCs, but we'll leave that decision to you!

How we picked

To compile this list, we searched all over, finding the top picks from the most trustworthy and popular brands. Looking over reviews and several factors to pick out some of the top picks that suit the RTX 5090. Primarily focusing on size compatibility, allowing for a GPU length of 360mm to accommodate the Nvidia GPU. We review each pick in detail to ensure you can make the best decision for your build.

Our top picks

At the top of the list is the Lian Li O11 Vision Compact, which comes in both black and white.

With an open aquarium-style look, it shows off your build in all its glory, along with hiding the majority of connections and keeping it clean with a dual chamber design. This case does a good job of concealing any of the less 'attractive' parts of your setup, allowing you to keep your setup looking visually clean and appealing.

As for cooling, it doesn't come with any pre-installed option and allows you to fill it out yourself with the ones you want. Instead, it has the space to fit in three 120 or two 140mm fans on top, three 120mm fans on the side, three 120mm on the bottom, and two 120mm fans on the rear, along with up to 360mm radiators on the top, side, and bottom.

Most importantly, it supports up to a 408mm GPU length at max that can cover the FE cards and, most likely, all partner models. It also supports a 164mm CPU cooler height if you opt for a tower solution. The storage options facilitate two SSDs and another two SSDs or HDDs.

It also offers personalization and versatility, with vision or mesh options for the top panel. So, you can install an AIO on top or have more glass to peer into the case. For the IO, you can have a power button, two USB 3.0, one USB C 3.1, and an audio port.

What users say

There are plenty of reviews to go by, as the Lian Li O11 has 319 ratings on Amazon with an average of 4.7 stars and plenty of options. One of which is Foxpwr, who says, "This case is it. This is the endgame case I have been looking for. Lian Li made this extremely easy to assemble as you can pretty much, take any piece out of the case so that you may install your fans, AIO, and motherboard.".

Another option is if you want something smaller, then there are micro-ATX cases you can consider to fit an RTX 5090. One of which is the Cooler Master MasterBox Q300L. With GPU support lengths up to 360mm, it can easily fit the FE version of the card, with many of the AIB options also being small enough to fit. So, if you want a smaller overall build, the MATX option minimizes the overall volume it takes up.

It is also very modular with a moveable I/O panel, so you can move which side of the body it is installed on. This panel has two USB 3.0 ports, along with audio in and out, as well as power and reset buttons. You can also move the feet, making it quite a flexible building solution.

The Q300L also offers a lot of mesh and open sides to keep the airflow in a good state. Make sure your components get all the air they may need for cooling. With the sides meshed up, it's the sides that get the acrylic panel treatment and show off the internals.

It comes with one preinstalled 120mm fan in the rear. The top has space for two 120mm fans, with the front capable of fitting in two 120/140mm fans or radiators. All of that comes in a very affordable price too, so you can afford that 5090 and put more budget towards other parts.

What users say

It's not just us praising the case, either. The reviews on Amazon have a similar story, considering the case has an average rating of 4.5 stars from over 13,000 ratings. One of the reviews on the case from Trevor states, "Cost friendly, light weight, excellent airflow, fits everything great. The mesh style walls makes it easy to place fans however you would like. Liquid coolers fit perfectly. Wire management is great with these cases. Super easy to feed wires, easy to disassemble and reassemble. I’ve built 10+ computers as budget friendly builds for people in my area using these and could not be more satisfied. 10/10 recommend!".

The Corsair 4000D Airflow, a particularly well-known and solid option for a PC case. It's renowned and has been around for a while, offering a strong performance for airflow and still looking great doing so. With a sturdy build too, it offers a great building experience and feel to get it up and running.

It can fit GPUs up to 340mm if you have a front-mounted radiator and fans or 360mm with a top-mounted one instead. The case supports up to a 360mm radiator along with 280 and 240mm ones at the front. As for fans, it can have two 120/1400mm ones on top, three 120mm/ two 140mm in front, and one 120mm at the rear. So you can fill it up with plenty of cooling capacity for your system and improve airflow.

This PC case also comes with two 120mm AirGuide fans that use anti-vortex vanes, which basically means the air is turned into a cone-like shape, increasing its reach and resulting in better cooling. You can mount these fans anywhere in the case and paired with other fans, it should result in a power and efficient draft through the PC keeping your RTX 5090 and other components cool.

Besides that, it can accommodate two 2.5" SSDs and 3.5" HDDs. So, after you've maxed out the storage capacity using the m.2 slots on your motherboard, you can increase the storage by installing SSDs, meaning you don't have to worry about running out of space.

For the IO at the top, you have a slim picking of one USB 3.0, one USB 3.1 type-C, an audio/microphone jack, and a reset and power button. For the storage slots, it has two 3.5mm sleds and two 2.5mm mounting points for a decent amount of expandability.

What users say

With over 17,000 ratings on Amazon, the case averages 4.7 stars out of 5, making it a well-received product. One of these reviews highlights some of the best features, as Isaac writes:

"Intuitive Cable Management: The case features CORSAIR’s RapidRoute cable management system, which simplifies routing cables and keeps your build looking clean and organized.

Spacious Interior: With support for full-size ATX motherboards, large GPUs, and multiple storage drives, the 4000D AIRFLOW accommodates powerful builds with ease.

Tool-Free Installation: Installing components is straightforward, thanks to tool-free drive bays and an intelligently designed layout."

The last PC case on our list is the big brother of the Corsair 4000D Airflow, the Corsair 7000D Airflow. This case offers a higher capacity for installing fans and radiators. More specifically, you can mount three 120 mm or 140mm fans on the top and front and one 120mm or 140mm fan in the rear. However, you can also mount one 360 or 420mm radiator on the top, one 420 or 480mm radiator on the front, and one 120mm or 140mm fan in the rear.

This means that you can install fans and radiators in plenty of ways for optimal cooling performance. It also has a 450mm max GPU capacity, and the RTX 5090 has a length of 304mm. Even if you get a third-party 5090, you shouldn't be short on space, as 450mm is more than enough to comfortably house this gaming behemoth.

It can also support ITX, mATX, and ATX motherboards, meaning that you can mount your RTX 5090 on a smaller motherboard, which generally costs less, without worrying about compatibility issues. Regarding connectivity options, it features four USB 3.0 and, one USB 3.1 Type-C, and one audio jack. So, you can connect various peripherals directly with this card, which makes it better as you don't have to reach around the back of the case to access the ports on the motherboard.

Overall, this is one of the best cases for RTX 5090, and it even comes with a three-slot vertical GPU mount if you plan on changing things up a bit. Cable management is also easier in this case due to the rapidroute cable management system. It can also hold four 2.5'' SSDs and six 3.5" HDDs, which is much more than the capacity offered by the 4000D.

What users say

According to Amazon reviews, this case has plenty of room, excellent build quality, and airflow. One reviewer said: "This has been my favorite case ever to build in. It's just ... easy. Cables are truly manageable. The hinged sides are great. The ability to customize is beautiful. You can add so many drives or remove the bays entirely. Tons of options for cooling. Lots of room for airflow."

How to pick the best case for the RTX 5090

Picking out the best case for RTX 5090 can be pretty tasking, but we've narrowed it down to a few of the best options and highlights we thought you should consider. But otherwise, if you're thinking about what to look out for, we have a couple of core factors to consider.

Size compatibility

The first of which is the size of the case supports. The RTX 5090 is not as big as some of the 4090s we've seen, but it can still be quite a big factor. The FE comes with a length of 304mm and only a dual slot, so, for the most part, it might not make too much difference. You just might find some of the partner cards coming in quite a bit bigger, and it's best to double-check that they will actually fit in.

Design

Another factor is how it will look and how well it's designed. Make sure it fits right into your workspace and where you're planning on placing it. But also that it looks nice, as it might be sitting there for a while holding all your parts in there; you will be looking at it for a good minute, so it best to pick a part that you enjoy and will last for that time.

Cooling

Another factor is to make sure it has enough cooling capacity. You don't want to restrict airflow to your system, so let it all thrive with plenty of cool air flowing into it. This ensures your GPU and CPU can perform at their best without being throttled while keeping the temperatures in check.