shells/bash: Update to 5.3.15

shells/bash: Update to 5.3.12

shells/bash: Update to 5.3.9

shells/bash: Reintroduce PORTS_READLINE

Now that readline has been updated to 8.3, the option to use the library from
ports rather than the bundled version can be restored. The option remains
disabled by default to avoid unexpected build or runtime changes for users
and to maintain consistency with previous releases.

PR:		288208

shells/bash: Update to 5.3.8

shells/bash: Fix documentation bug

Point to ${PREFIX}/etc/profile instead of /etc/profile

MFH:		2025Q4

shells/bash: Update distinfo after upstream tarball reroll

Upstream rerolled the release tarball to include updated .gmo files.
See discussion:

https://lists.gnu.org/archive/html/bug-bash/2025-07/msg00156.html

shells/bash: Update to 5.3.3

shells/bash: Bump PORTREVISION after OPTIONS_DEFAULT change

shells/bash: Enable SYSBASHRC option by default

Approved by:	jrm (mentor),  ehaupt (maintainer)
Differential Revision:	https://reviews.freebsd.org/D51201

shells/bash: Update to 5.3

Changes:	https://lists.gnu.org/archive/html/bash-announce/2025-07/msg00000.html

shells/bash: Register CONFLICTS

shells/bash-static: Revert accidentally staged review

shells/bash-static: Exclude PORTS_READLINE and NLS options with STATIC

Summary:
When building the static version of bash, runtime dependencies on
gettext-runtime and readline should not be present as the binary is
statically linked. This change excludes the PORTS_READLINE and NLS
options in the slave port to avoid unnecessary dependencies.

Differential Revision: https://reviews.freebsd.org/D49191

shells/bash: Update to 5.2.37

shells/bash: Update to 5.2.32

*/*: Remove GNU_CONFIGURE_MANPREFIX

After 9fd7ee1cdf6c remove GNU_CONFIGURE_MANPREFIX from my ports.

*/*: Simply future removal of GNU_CONFIGURE_MANPREFIX

Simplify the future removal of GNU_CONFIGURE_MANPREFIX after the
manprefix migration is complete. The current placement of
GNU_CONFIGURE_MANPREFIX will not result in consecutive blank lines or
comments when lines containing GNU_CONFIGURE_MANPREFIX are removed in
batches.

Notified by:	mat

shells/bash: Move manpages to share/man

shells/bash: Update to 5.2.26

shells/bash: Remove unsed makeinfo use flag

Makeinfo is not actually used because, after patching, it updates the
timestamps of *.info files, preventing doc/Makefile from wanting to
regenerate bash.info.

While here, sort USES.

PR:		275439

shells/bash: Update to 5.2.21

shells/bash: Update to 5.2.15

shells/bash: Update to 5.2.12

shells/bash: Switch back to use PORTS_READLINE by default

Now that devel/readline has been updated, switch back to use
PORTS_READLINE by default.

shells/bash: Fix typo in 372693913a051e16e6c79f1e22d78e0036f1575e

shells/bash: Unbreak this port after readline 8.2 update

- Add BUILD_DEPENDS to avoid the users building this port with readline 8.1.x

Approved by:	portmgr (blanket)

shells/bash: Update to 5.2.9

shells/bash: Improve message for PORTS_READLINE_BROKEN

PR:		266897 (based on)

shells/bash: Update to 5.2.2

shells/bash: Revise fix when NLS is off

The fix commited in 17f1bb50e42a45dc64fc898cd9cae905d7262bda clashed
with cc83ec0f744fb159bd48303d15c09aa0c6cb38a4.

The later is a more elegant solution that doesn't require to drop
the header files from being installed.

This commit reverts changes from 17f1bb50e42a45dc64fc898cd9cae905d7262bda.

shells/bash: fix static build

The logic in m4/strtoimax.m4 is inverted: it replaces strtoimax() if and only
if it is present and functional.

files/patch-configure avoids having to run autoreconf in the port and can be
removed once the fix has been adopted upstream.

differential Revision:  https://reviews.freebsd.org/D36849

shells/bash: Fix pkg-plist when NLS is turned off

Notified by:	bofh (via mail)

shells/bash: Fix build with NLS disabled

shells/bash: Update to 5.2

Release
notes:	https://lists.gnu.org/archive/html/bash-announce/2022-09/msg00000.html

Remove WWW entries moved into port Makefiles

Commit b7f05445c00f has added WWW entries to port Makefiles based on
WWW: lines in pkg-descr files.

This commit removes the WWW: lines of moved-over URLs from these
pkg-descr files.

Approved by:		portmgr (tcberner)

Add WWW entries to port Makefiles

It has been common practice to have one or more URLs at the end of the
ports' pkg-descr files, one per line and prefixed with "WWW:". These
URLs should point at a project website or other relevant resources.

Access to these URLs required processing of the pkg-descr files, and
they have often become stale over time. If more than one such URL was
present in a pkg-descr file, only the first one was tarnsfered into
the port INDEX, but for many ports only the last line did contain the
port specific URL to further information.

There have been several proposals to make a project URL available as
a macro in the ports' Makefiles, over time.

shells: remove 'Created by' lines

A big Thank You to the original contributors of these ports:

  *  Adam Weinberger <adamw@FreeBSD.org>
  *  Andreas Kohn <andreas@syndrom23.de>
  *  Carlos Jacobo Puga Medina <cpm@FreeBSD.org>
  *  Cyrille.Lefevre@laposte.net
  *  Danijel Tasov <danielt@pilgerer.org>
  *  David O'Brien <obrien@NUXI.com>
  *  Emanuel Haupt <ehaupt@FreeBSD.org>
  *  Hajimu UMEMOTO <ume@FreeBSD.org>
  *  Igor Pokrovsky <ip@unixway.org>
  *  Jean-Yves Lefort <jylefort@brutele.be>
  *  Kai Wang <kaiw27@gmail.com>

shells/bash: Update to 5.1.16

shells/bash: Update to 5.1.12

*/*: Remove redundant '-[0-9]*' from CONFLICTS

The conflict checks compare the patterns first against the package
names without version (as reported by "pkg query "%n"), then - if
there was no match - agsinst the full package names including the
version (as reported by "pkg query "%n-%v").

Many CONFLICTS definitions used patterns like "bash-[0-9]*" to filter
for the bash package in any version. But that pattern is functionally
identical with just "bash".

Approved by:	portmgr (blanket)

shells/bash: fix compilation after libncurses split in base

bash actually only requires libtinfo, but up to recent change in
14.0-CURRENT, libtinfo and libncurses were bundled into one single libs,
so linking only to libncurses was not a problem.

By telling bash to link to libtinfo and not to libncurses, it works on
both system where ncurses has been split and those without the split as
there is a libtinfow.so symlink to libncursesw.so on those.

shells/bash: Update to 5.1.8

shells/bash:Prefix '/etc/inputrc' in bundled readline and documentation

Bundled readline now will use LOCALBASE/etc/inputrc as its ultimate
default inputrc file (instead of /etc/inputrc). This puts these ports in
line with what devel/readline has been doing recently (since 20210103).

PR:             255126
Submitted by:   olivier.freebsd@free.fr

Remove # $FreeBSD$ from Makefiles.

NEW PORT: shells/bashc: GNU Bourne Again shell extended with two-panel file
manager

Bash Commander is a fork of GNU Bourne Again Shell. It's main feature is
a visual two-panel mode, much like Midnight Commander and other text-mode
visual shells.

WWW: https://github.com/sergev/bash-commander

Also add bashc to the CONFLICTS section of shells/bash.

PR:		253783, 253784
Submitted by:	Igor Pokrovsky <ip AT unixway DOT org>

Enforce using libncursesw like the rest of the ports

The whole ports tree has been enforced on libncursesw (widechar) version for a
while.
With the exception of a few ports including bash.

This is even more problematic in the case of bash because it links to
libreadline which is
linked to libncursesw.so

Update to 5.1.4

Patch committed in r557806 makes this parallel build safe again.

In some cases bash fails to build parallel make jobs. Provide a patch.

[1]
https://gitweb.gentoo.org/repo/gentoo.git/commit/?id=4c2ebbf4b8bc660beb98cc2d845c73375d6e4f50

PR:		251755
Reported by:	mikael, freebsd@bengrimm.net, jakob@grimstveit.no
Submitted by:	rcarter@pinyon.org
Obtained from:	gentoo [1]

shells/bash: workaround build failure with -j32

Set MAKE_JOBS_UNSAFE=yes:
bashline.c:65:10: fatal error: 'builtins/builtext.h' file not found

Update to 5.1

Release notes:	https://lists.gnu.org/archive/html/info-gnu/2020-12/msg00003.html

Update manual page to refer to ${LOCALBASE}/etc/profile instead of /etc/profile.
See also ports/UPDATING (entry 20200716).

PR:		248805 (based on)
Submitted by:	0mp

Cleanly decouple bash from base by reading `profile` from $LOCALBASE/etc/
instead of from /etc.

Document this change in UPDATING and provide a migration strategy.

PR:		247934 (based on)
Submitted by:	Michael Osipov <michael.osipov@siemens.com>

Bash comes with a bundled version of libreadline and compiled with. Start using
devel/readline by default but provide an option to keep using the bundled one.

PR:		247932 (based on)
Submitted by:	Michael Osipov <michael.osipov@siemens.com>

Update to 5.0.18

Changelog:	http://ftp.gnu.org/gnu/bash/bash-5.0-patches/bash50-018

Update to 5.0.17

Update to 5.0.16

Update to 5.0.11

Update to 5.0.9

Convert to UCL & cleanup pkg-message (categories s)

Update to 5.0.7

Update to 5.0.3

Do not attempt to build 'loadables' in the install target when the static build
option is selected.

Loadables will not build statically. The upstream makefile handles this by
ignoring a non-zero exit status by prefixing the build instruction with a minus.
Nevertheless this causes plenty of confusion among our user base.

No PORTREVISION bump as this is a NOOP.

Update to 5.0.2

Properly fix broken man pages by removing unsupported characters.

PR:		234992 (based on)
Reviewed by:	bapt
Reported by:	bapt

Mandoc'ify man pages to avoid dependency to groff.

PR:		234992 (based on)
Submitted by:	sakisp@gmail.com

Update to 5.0

PR:		234827
Exp-run by:	antoine

Install texinfo files (GNU info) into ${PREFIX}/share/info

After a discussion on the mailing list on moving manpages to
${PREFIX}/share/man for consistency with base where it is
installed in usr/share/man, it appeared the same should happen
to GNU info files which were installed under share in base and
not in ports.

Now texinfo is not in base on any of the supported version of FreeBSD
it is possible to proceed to this move and it is easier to do than
the manpage change.

Other benefit than consistency are less patching: all build tools but
cmake are expecting info files to be under share/info and cmake (patched here)
was having an exception for BSD so the patch makes FreeBSD case less
specific for them

Bump revision of all impacted ports

PR:		232907
exp-run by:	antoine
Differential Revision:	https://reviews.freebsd.org/D17816

- Update to 4.4.23
- Pass -Wl,-export-dynamic to LDFLAGS instead of CFLAGS in order to avoid
warning:
  cc: warning: -Wl,-export-dynamic: 'linker' input unused
[-Wunused-command-line-argument]

- Update to patchlevel 19
- Simplify MASTER_SITES [1]

Submitted by:	gerald (via mail) [1]

Set LLD_UNSAFE=yes that the port will continue to link with ld.bfd
if /usr/bin/ld is lld, until the issue can be addressed.

PR:		214864
Approved by:	portmgr (LLD_UNSAFE blanket)
Sponsored by:	The FreeBSD Foundation

Provide an option to enable system-wide rc files.

This enables:

  - System-wide .bashrc file for interactive shells
    ${PREFIX}/etc/bash.bashrc

  - System-wide .bash_logout for login shells
    ${PREFIX}/etc/bash.bash_logout

PR:		222973
Submitted by:	ilyushkeane@gmail.com

Update WWW, current URL is a permanent redirect.

Make bash use of fdescfs use optional, disabled by default, and forced off when
disabled.

This allows users to avoid mounting an extra FS that we don't enable by default.

Only display pkg-message with fdescfs instructions when option is enabled.

Submitted by:	swills
Differential Revision:	https://reviews.freebsd.org/D10394

Default path includes the string %%LOCALBASE%%. This was intended to be replaced
with the real value of LOCALBASE by the port Makefile at some point, but it
isn't at the moment.

Set this value in the Makefile by defining CPPFLAGS accordingly.

PR:             217451
Submitted by:   Dan McGregor <dan.mcgregor@usask.ca>
MFH:            2017Q1 (blanket)

The late mount option is required for systems with a seperate boot partition
(e.g. systems with an encrypted root partition) where it is impossible for the
fdescfs module to be autoloaded when /boot/kernel isn't available yet. Change
pkg-message accordingly.

Also change 'fdesc' mount point name to 'fdescfs' to simplify things: this way
'mount fdescfs' will work just as fine as 'umount fdescfs'. The less things to
remember - the better it is.

PR:		216985
Submitted by:	John Smith <godevilove@ya.ru>

Rectify license

Update to 4.4.12

Changelog:

Fixes a bug. When -N is used, the input is not supposed to be split
using $IFS, but leading and trailing IFS whitespace was still removed.

MFH:		2017Q1

Update to 4.4.11

Changelog:

Under certain circumstances, bash will evaluate arithmetic expressions as
part of reading an expression token even when evaluation is suppressed. This
happens while evaluating a conditional expression and skipping over the
failed branch of the expression.

There is a race condition in add_history() that can be triggered by a fatal
signal arriving between the time the history length is updated and the time
the history list update is completed. A later attempt to reference an
invalid history entry can cause a crash.

Depending on compiler optimizations and behavior, the `read' builtin may not
save partial input when a timeout occurs.

Subshells begun to run command and process substitutions may attempt to
set the terminal's process group to an incorrect value if they receive
a fatal signal.  This depends on the behavior of the process that starts
the shell.

MFH:		2017Q1

Update to 4.4.7

Changelog:

- Out-of-range negative offsets to popd can cause the shell to crash attempting
  to free an invalid memory block.
- When performing filename completion, bash dequotes the directory name being
  completed, which can result in match failures and potential unwanted
  expansion.

MFH:		2017Q1

Re-use PATCH_SITES for cklatest target instead of hardcoding.

Update to 4.4.5

Update to 4.4

Differential Revision:  https://reviews.freebsd.org/D8085

Update cklatest-host. Old one returns permission denied.

Remove stray ICONV patch that breaks unicode support if NLS is disabled.

PR:             210654
Submitted by:   yuri@rawbw.com

[1] Make USES=iconv permanent, instead of being only for NLS=on case.

    The reason is that NLS is related to message translations to different
    languages.

    And bash has the general feature that \uNNNN is translated into the unicode
    character using iconv. This is unicode support, and should have nothing to
    do with translations.

    bash also currently has a bug that --disable-nls causes it to fail to find
    iconv. This bug has been reported upstream to bash-devel ML. In the future,
    when bash will fix this, this will make a difference.

    Note that this uses iconv from libc.

[2] Update to 4.3.46

PR:             206903 [1], 210620 [2]
Submitted by:   yuri@rawbw.com [1], pkubaj@anongoth.pl [2]
Discussed with: adamw

Remove NLS, DOCS, EXAMPLES and IPV6 from OPTIONS_DEFAULT, they are enabled by
default anyway and don't need to be listed

Approved by:	portmgr blanket

- Fix trailing whitespace in pkg-descrs, categories [p-x]*

Approved by:	portmgr blanket

The latest patch (42) has been slightly adjusted. See the following diff:

--- diff begins here ---
--- /usr/distfiles/bash.old/bash43-042	2015-08-13 21:41:06.000000000 +0200
+++ /usr/distfiles/bash/bash43-042	2015-12-01 22:57:39.000000000 +0100
@@ -27,7 +27,7 @@
 + 		lex_rwlen = 0;
   	    }
   	}
-*** ../bash-4.3-patched/parse.y	2015-05-18 19:27:05.000000000 -0400
+*** ../bash-4.3-patched/y.tab.c	2015-05-18 19:27:05.000000000 -0400
 --- y.tab.c	2015-06-29 10:59:27.000000000 -0400
 ***************
 *** 6021,6024 ****
--- diff ends here ---

Notified by:	many

Update to 4.3.42

bash: Export symbols for "enable -f"

PR:		201959
Reviewed by:	ehaupt
Approved by:	markj (mentor)
Sponsored by:	EMC / Isilon Storage Division
Differential Revision:	https://reviews.freebsd.org/D3231

In addition to the previous commit also define USE_MKSTEMP=1 for a different
code section.

Notified by:	naddy

Scripts like https://github.com/henricj/scripts/blob/master/stir.sh often
generate a bunch of,
   cannot make pipe for process substitution: File exists
errors.

The problem lies with colliding pipe names.

The code in sh_mktmpname() in lib/sh/tmpfile.c uses a combination of things like
the current time, the PID, and an incrementing counter. Since the child PIDs
tend to be sequential (barring kern.randompid=1), there are collisions.

Fix this problem without rewriting upstream code by defining USE_MKTEMP=1 to
use the mktemp(3) code of bash.

FreeBSD's mktemp() is not nearly as bad as the bash default and isn't
brain-damaged like some platforms (which is likely why the bash code tries to
do it's own thing). In FreeBSD, "mktemp(3)" it uses arc4random to pick one of
62 symbols for each "X".

Submitted by:   Henric Jungheim <software@henric.org>

Update to 4.3.39

Cleanup DIST* variables.

When appropriate:
- Try to use DISTVERSION{SUF,PRE}FIX
- Replace PORTNAME-PORTVERSION by DISTNAME
- Convert MASTER_SITES to use macros
- Other light cleanup

With hat:	portmgr
Sponsored by:	Absolight

Ports should not change their pkgname depending on options. Change the way how
the slave port is handled.

PR:		197818
Submitted by:	mat

Update to 4.3.33

Bump PORTREVISION on shells that use gettext to force a package rebuild
and reinstall.  This should make the shells link with libintl.so.8 instead
of libintl.so.9 and should give package users a better chance of having a
working shell when something went wrong with the gettext update.

Update to 4.3.30