Προϊόντα – Ucandrone https://ucandrone.com Fri, 19 Jul 2024 11:59:37 +0000 el hourly 1 https://wordpress.org/?v=5.5.17 Here 3 GNSS GPS https://ucandrone.com/store/gps/here-3-gnss-gps/ Wed, 22 Feb 2023 14:30:22 +0000 https://ucandrone.com/?post_type=product&p=22333 GNSS receiver for The Cube  Here3 GNSS receiver is a new version of the world famous Here GNSS receiver. It is the perfect fit for all Cubes  by offering plenty of new possibilities. It was specifically designed and built to work with this world leading and most appreciated open source flight controller. Indeed, it provides a precise positionning information by allowing multiple GNSS reception of the most popular and efficient current systems, including brand new ones (GPS/QZSS, GLONASS and BeiDou). Thanks to that, you benefit from the maximum satellite reception at all dense with this dense covering.

MAIN FEATURES:

  • New integrated receiver allowing RTK precision;
  • New processor allowing to perform updates and to have user defined features thanks to ChibiOS operating system and its open architecture;
  • Communicate via CAN;
  • Complete IMU integrated having an accelerometer, a gyro and a compass.
 
TECHNICAL SPECIFICATIONS  
  • Receiver: u-blox M8 high precision GNSS module M8P (GPS L1C/A, GLONASS L1OF, BeiDou B11)
  • Processor: STM32F302
  • IMU: ICM20948
  • Navigation update rate: Max 8 Hz
  • Positionning accuracy: 2.5m (3D FIX) / 0.025m (RTK)
  • Communication: CAN
  • Connectors: JST-GH
  • Operating temperature: -40°C à 85°C
  • Dimension: 76 x 76 x 16.6 mm
  • Weight: 49 gr
]]> Power Brick Mini https://ucandrone.com/store/sensors-and-imus/power-brick-mini/ Tue, 11 Feb 2020 13:10:18 +0000 https://ucandrone.com/?product=power-brick-mini Specification:

  • up to 8s 30A continuous
  • XT60 connectors

Includes:

  • 1 x Power Brick Mini

No wires, Power 2 cable is included with pixhawk 2.1

]]> mRo SiK Telemetry Radio V2 Air/Ground Bundle https://ucandrone.com/store/wireless-telemetry/mro-sik-telemetry-radio-v2-airground-bundle/ Tue, 11 Feb 2020 12:56:55 +0000 https://ucandrone.com/?product=mro-sik-telemetry-radio-v2-airground-bundle
mRo SiK Telemetry Radio V2 Air/Ground Bundle includes two radios; the small version goes in your air vehicle and the "big" one plugs into ground station via the USB connector.

A SiK Telemetry Radio is a small, light and inexpensive open source radio platform that typically allows ranges of better than 300m “out of the box” (the range can be extended to several kilometres with the use of a patch antenna on the ground). The radio uses open source firmware which has been specially designed to work well with MAVLink packets and to be integrated with the Mission Planner, Copter, Rover and Plane.

This product was originally created by 3DR, from which many of the hardware designers are now working at mRo.

The SiK Air comes in two frequencies; 915Mhz [US] and 433Mhz [Europe].

-1x MRC0206-150mm JST-GH to JST-GH, used in newer autopilots.
-1x MRC0213-150mm 6-Pins DF13 to JST-GH cable for PixHawk1 and older autopilots.
-1x u.FL to RP-SMA Adapter.
-1x Micro USB cable.

-2x 3dBi 915Mhz or 433Mhz Antenna (Depending on the version you select).

Select your frequency:

Select 915 MHz for the U.S. and 433 MHz for Europe. Frequency regulations vary by country, so consult your local airspace authority to find out which frequency is legal in your area.

 

Specifications:

  • Interchangeable air and ground modules
  • 915 or 433 MHz
  • Micro-USB port
  • 6-position DF13 connector
  • 100 mW maximum output power (adjustable)
  • -117 dBm receive sensitivity
  • Based on HopeRF’s HM-TRP module
  • RP-SMA connector
  • 2-way full-duplex communication through adaptive TDM
  • UART interface
  • Transparent serial link
  • MAVLink protocol framing
  • Frequency Hopping Spread Spectrum (FHSS)
  • Configurable duty cycle
  • Error correction corrects up to 25% of bit errors
  • Open-source SIK firmware
  • Configurable through Mission Planner and APM Planner
  • Supply voltage: 3.7-6 VDC (from USB or DF13 connector)
  • Transmit current: 100 mA at 20 dBm
  • Receive current: 25 mA
  • Serial interface: 3.3 V UART
  • 26.7 mm x 55.5 mm x 13.3 mm (without antenna)
]]> The Cube Orange https://ucandrone.com/store/autopilots/the-cube-orange/ Tue, 11 Feb 2020 12:43:03 +0000 https://ucandrone.com/?product=the-cube-orange Cube Orange target to education, drones lovers and professional cost-effective flight control hardware providers. The new generation of more powerful H7 processor, stronger performance, faster, more secure, built-in triple redundant sensor, temperature control shock absorption IMU. With the help of flight software, Cube Orange can completely fly any remotely controlled aircraft, helicopter or multi-rotor vehicle and become a more professional uav platform.

 

For more details, please check the following link:

 

https://docs.cubepilot.org/user-guides/autopilot/the-cube-module-overview

]]> The Cube Standard Cable Set https://ucandrone.com/store/cables-connectors/cables/the-cube-standard-cable-set/ Tue, 11 Feb 2020 12:20:43 +0000 https://ucandrone.com/?product=the-cube-standard-cable-set Cables for accessories are JST to DF13 cables which are compatible with old pixhawk accessories, such as Telemetry, Power Brick or GPS

 

It contains:

  • TELEM Cable * 2
  • POWER Cable * 2
  • I2C Cable * 1
  • BUZZER Cable * 1
  • MICRO USB Cable * 1
  • GPS1 Cable(with saftey switch) * 1
  • GPS2 Cable * 1
]]> Kore Carrier Board https://ucandrone.com/store/autopilots/carrier-boards/kore-carrier-board/ Tue, 11 Feb 2020 11:54:43 +0000 https://ucandrone.com/?product=kore-carrier-board The Kore  by Spektreworks, is a carrier board for the Cube autopilot (cube not included)

Providing a convenient layout for multirotors specifically Quads, Octocopters and Octo-Quads (X-8s)

Kore carrier board for the Cube autopilot.

FEATURES AT-A-GLANCE

  • Up to 12-cell Lithium battery (50.4V)
  • 140A continuous current with 280A surges
  • Power and signal for ESCs conveniently located in corners
  • 12V navigation light power available at each cornerBuilt-in power distribution
  • Built-in voltage and current sense
  • Redundant power supplies for flight critical components
  • Payload connectors with resettable fuses for 5V, 12V, and direct battery power
  • Good power and error indicator lights
  • Built-in buzzer with volume control
  • Connectors for every function of Pixhawk Cube
  • Easily accessible PWM voltage level selector (3.3V or 5V)
  • Resistant to ground bounce on PWM signal
  • Connector-compatible with standard ProfiCNC carrier board
  • Connector ports for debugging IO and FMU processors

STANDARD CABLES:

  • 4-pin JST GH
  • 6-pin JST GH

PAYLOAD POWER CABLES:

  • 4-pin Clik-Mate 1.25mm (for 5V payload power)
  • 5-pin Clik-Mate 1.25mm (for 12V payload power)
  • 6-pin Clik-Mate 1.25mm (for battery payload power) NOTE: Pixhawk 2.1 Cube NOT included.
]]> Here Flow https://ucandrone.com/store/sensors-and-imus/here-flow/ Tue, 11 Feb 2020 11:34:21 +0000 https://ucandrone.com/?product=here-flow Before using the Here Flow, please download the instruction from ‘Hereflow’ section on Cubepilot.org. Thank you! ]]> Herelink HD Video Transmission System (Beta 2) https://ucandrone.com/store/ground-station/herelink-hd-video-transmission-system-beta-2/ Tue, 11 Feb 2020 11:22:11 +0000 https://ucandrone.com/?product=herelink-hd-video-transmission-system-beta-2 Herelink is an all-in-one solution for long-range HD video transmission, which can realize video, data transmission and radio control. The 2.4GHz radio controller with built-in screen which allows users to get long range HD video, data and control information, and the transmission range is up to 20km. The latency is less than 110ms. The large 5.5" screen displays a multitude of control options such as live images, autopilot configuration through the native QGround control or other GCS applications based on the Mavlink system.

The Air Unit supports 5-12v power input and has a single UART for connection to the flight controller or other Mavlink accessories. Both the Air Unit and the Radio Controller are equipped with powerful Pinecone S1 processors with 4 cores at 2.2GHz and 4 more additional cores at 1.4GHz, which allows for tons of possibilities for future development.


Features:

All in one: Telemetry, Video, and Control
2.4Ghz frequency
Up to 20KM in FCC mode and 12KM in CE mode
UART Telemetry
RC Protocol: SBUS, iBUS, ETC.
Mavlink compatible
Touch screen
2 HDMI inputs for 1080P@60fps video transmission
APP QGround control, and API for development
WIFI, Bluetooth and USB to connect with other devices

Your Purchase Includes:

1x Herelink Radio Controller
1x Herelink Air Unit






]]> GPS2 Port Cable https://ucandrone.com/store/cables-connectors/cables/gps2-port-cable/ Mon, 10 Feb 2020 19:26:08 +0000 https://ucandrone.com/?product=gps2-port-cable Used for connecting Here GNSS or Here+ GNSS Rover to GPS 2 port in PH2.1

 


only useful when using Here or Here+ as a secondary GPS for Pixhawk2.1

]]> Here 2 GNSS GPS https://ucandrone.com/store/gps/here-2-gnss-gps/ Mon, 27 Mar 2017 14:26:55 +0000 https://ucandrone.com/?product=here-2-gnss-gps New Smart Chip

Built-in STM32F302 processor chip, running a real-time operating system ChibiOS using open architecture, enables user defined features, and supports firmware updates.

Fast Switch to CAN Mode

Both CAN and I2C transmission mode are coming on schedule, switched freely through the built-in mechanical switch.

More Units, More Powerful

A complete IMU including an accelerometer, compass and gyro can meet the diverse needs of the user for navigation.

 Colorful LED, More choices

4 independent and customizable LEDs can be set to indicate different flight status by displaying various LED flashing pattern.

Small Change, Big Role

Built-in barometer MS5611, for measuring barometric pressure and calculating altitude, especially for those who need external barometer due to internal placement of flight controller inside an airtight aircraft.

]]>