Easy to set up and use - and solves a host of problems that smart plugs cannot fix. I use one to turn on an old analog amp that provides music outdoors, and another is linked to a Switchbot hydrometer and turns an old button style humidifier on. Another one turns my Keurig on and off at the right times and another controls a heating pad so my bed is toasty when I get in! Like I said a number of problems - easily solved. Works well with Alexa, great battery life and easy to install in some weird solution areas! Nice job Switchbot! you rock!

Bought two of these SwitchBot fingerbots - one of which was included in the combo pack with the SwitchBot Hub Mini required to make hey google or amazon alexa verbal commands via google or alexa smart devices. Got all of this because had two buttons - the main power button & an AC power button - that had to be pushed one after another on a Power Bank inside a starwars HD-R2D2 droid that I did not want to open up all the time when I wanted to turn it on and off. SwitchBot works great & presses quickly when you finally figure out how to get the results that you want.

Great with bluetooth connecting to the switchbot app. But for full versatility, also get the SwitchBot Hub Mini to give audio verbal commands. Works great if you then connect to Google because could use my Google Nest Mini to verbally give commands to "Turn On R2D2" and later to "Turn Off R2D2" - where google solved the trick where had to issue two commands in a single command automation to have two separate SwitchBot fingerbots to each separately one after another to first press the power button & then second press the AC button to then power up the AC power adapter plugged into the power bank to "Turn On R2D2".

However, when using Alexa on an Amazon Echo, could not combine commands for the two fingerbots to have each specifically press the two different separate buttons in a single alexa command routine because the routine would only activate only one fingerbot to do both presses on only one button. Oh well, gotta do two separate alexa audio commands if using Amazon Alexa.

Another minor issue was I had to place each fingerbot at an angle because each button presser did not press deep enough on the buttons - but fortunately there were the extra double-sided 3M mounting tape pieces to help securely tilt/angle each fingerbot to be able to actually press each button.

Nonetheless, this is a wonderful worthwhile solution to the problem of how to remotely press buttons inside an enclosed space that you do not want to always open up. Very much worth paying for. And fortunately the battery is replaceable.

Thanks So Much to both SwitchBot & Amazon for this remote pushbutton technology.

Modern-day homes are becoming smart homes, and one way to achieve this is by implementing smart light bulbs or constructing homes with smart devices built in. The problem is that older homes often require a complete makeover or the purchase of expensive products, which may be out of budget for some individuals.

This product solves that issue. There's no need for a smart bulb—you simply attach it to your light switch and use the app to turn the lights on or off in a room. It makes life easier, especially when you're in bed late at night and don’t want to get up to turn off the light—particularly if the switch is across the room.

The app also allows you to set timers or connect the device with other smart products to work simultaneously.

However, there are some downsides:

1. You need to have your smartphone with you at all times, unless you’ve programmed the device to turn on or off automatically.

2. There are extra steps involved in controlling the light. For example: unlocking your phone, opening the app, finding the device, and pressing the "on" or "off" button. (Widgets are available but require an account.)

3. You can still manually use the light switch. However, the app doesn't detect manual usage, so the next time you use the app, you may need to press the button twice in the app. (This could be seen as both a positive and a negative.)

4. It's unclear how long the adhesive will last. Only one spare adhesive strip was provided for each side.

5. Attaching the string with adhesive tape to the switch can be a bit of a hassle. You need to pull out the stem with the hook slightly, attach it to the switch, and then secure it to either the wall or the bottom of the switch. Be careful not to place it too far away—I recommend positioning it as close as possible to the switch to ensure it pulls up and down smoothly.

Honestly, our household is too used to using the switch manually. Over the past few days since we got the SwitchBot, we’ve rarely used it. It only comes in handy when we’re on a different floor checking if the lights are off, or when we’re feeling too lazy to get out of bed and walk a few steps to turn off the light. But at the end of the day, it gets the job done without any issues.

This is my second time purchasing this same product. I bought the first one about two years ago to use on my garage button, since the clicker stopped working and is apparently impossible to fix. This turns out to be a much better solution, because if you also purchase the Hub Mini, you can activate it from anywhere (comes in handy if I’m not home but need to open my garage for someone). Also works well with Siri, as I’ve programmed shortcuts for “open/close my garage”, and assigned it to the Action Button on my iPhone, essentially making it the clicker.

The downside is that these are made of cheap material and wear down relatively quickly, depending on your expectations. I had hoped my original purchase would’ve lasted at least another year or two, but instead its lifespan was July 2022 to January 2025. That’s not bad….but still.

Regardless, I got two and a half years out of the original. In that time, it only went through one and a half batteries (I had to replace the battery once, and the replacement was still at least halfway charged).

And in that time, it worked great. Once in a while it wouldn’t respond to Siri or even pressing the shortcut manually, but in all of those cases I could simply open the Switchbot app and activate it from there. There’s also a good chance in most of those instances, it wasn’t a problem with the product, but with my WiFi or something.

So, if you don’t mind spending the $25-$30 to replace it every 2-3 years, it’s great. Personally I think the cost is worth it.

:

Bought this alongside the SwitchBot Hub Mini as part of the same sauna automation project. The idea is genuinely clever -- a little mechanical arm that physically presses a button on a schedule. Simple, elegant concept.

Reality is a different thing entirely.

Installation is where this thing earns its bad reputation. Getting the arm calibrated to the right position and pressure on a membrane-style touch panel took far more attempts than it should. Too far and it misses. Too close and it jams. The adhesive mount shifts over time and when it does you are back to square one. There is no feedback to tell you it actually registered the press, so half the time you are just hoping it worked until you go check.

Functionality when it is dialed in is acceptable. It presses the button. That is the job. But the margin for error is so small that I do not trust it to do that reliably without babysitting it.

Value for money is rough. The hardware itself is not expensive, but you need the Hub Mini to do anything useful with scheduling, which adds significant cost to what should be a simple solution. When you factor in the hours spent getting both devices to play nice, the math does not work out well.

I said it in my Hub Mini review and I will say it here too -- I am not buying anything else in this ecosystem. Too fragile, too finicky, and zero confidence it survives a factory reset.

I purchased SwitchBot for my Breville coffee machine. As safety it turns off after 4 hours SwitchBot it’s a great tool to use. I have the machine powered and ready to use in the morning by the time I’m up. So easy to install. Great job with this little tool invention! Recommend.

We wanted a way to toggle on and off our electric hot water heater so we were not heating water when we didn't need it. Since we wanted to be able to do it through a smart device, I also bought the hub. Installation was easy and integration into Google Home and Alexa was straightforward.

However, the battery failed in less than 2 months and needed to be replaced so be prepared to buy a different style battery than one you would commonly have lying around your house. That's to be expected. But the biggest gripe, and one that makes this a 3 star review is that it will often fail to work. If I use the app and push the button - even if I'm standing right next to the device - it will often give me a failure notice and I need to try again to make it work. The problem is further exacerbated that if you are using a smart device, you have NO notification that it failed. So I'm thinking that my hot water heater is working and jump into a freezing cold shower. The problem was so pervasive that I even installed a camera in the basement so I can see if the button actually worked or not (by the light being illuminated). That is simply unacceptable. It doesn't have to do with placement because my wifi router is near my hub (10 feet) and in the same room as my water heater, so distance or walls are not an issue. There are also no devices that would cause interreference to the hub or from the hub to the switch.

Great product idea. Works as I intended, however reliability and battery life make me question if I will continue to use this product.

The Switchbot Bot is an impressive and innovative product that presents an efficient solution for remotely powering on electronic devices. By harnessing wireless technology, it allows users to seamlessly initiate their computer's activation without the need to physically interact with the device. This feature proves particularly convenient for those seeking a streamlined and effortless experience.

One notable aspect of the Switchbot Bot is its seamless integration with personal computers. Users can conveniently activate their PCs from a distance, eliminating the need to keep the computer powered on continuously. This not only saves energy but also enhances overall device longevity. The ease of use and compatibility with various computer systems are commendable, making it a versatile choice for tech-savvy individuals.

Furthermore, the product's core functionality aligns perfectly with its creator's intended purpose. The Switchbot Bot effectively delivers on its promise of wireless control, granting users the ability to initiate their devices remotely and efficiently. Its reliable performance and straightforward operation ensure that the product serves its purpose admirably.

Aside from its primary use with personal computers, the Switchbot Bot boasts adaptability across a range of applications. Its versatility extends to various electronic devices, amplifying its utility beyond just PCs. This adaptability broadens the product's appeal, as it caters to the needs of a diverse user base with varying electronic requirements.

While the Switchbot Bot excels in numerous aspects, it is essential to acknowledge that its full potential is realized when integrated into a tech-savvy environment. Users who appreciate the convenience and cutting-edge features of the product will undoubtedly find it to be an invaluable addition to their setup.

In conclusion, the Switchbot Bot impresses as a remarkable and effective solution for remote device activation. Its seamless integration with personal computers, fulfillment of its intended purpose, and adaptability across multiple devices all contribute to its status as a standout product in the market. For individuals seeking a smart and efficient means of managing their electronic devices, the Switchbot Bot proves to be a highly recommended choice.

The product is very good and useful, but we need to have a flat surfaced special switch and socket panel to stick the bot, will not be useful for old Indian switch panels.

Meilleur achat! Incroyable pour le prix!! Fonctionne parfaitement mais attention, uniquement quand vous êtes à la maison sinon il faut programmer. Ne fonctionne pas si vous n êtes pas sous le même toit et donc le même réseau. Seul bémol mais pour le prix franchement

Very odd device but it actually works with almost all kind of buttons if you install it properly. It’s very important that you test the function few times BEFORE sticking it in place. Luckily there are 2 adhesive tapes in the package you can use.

Was so excited to have this robotic finger to help automate a daily routine to switch on the dehumidifier...and it delivers!!!

Damn effective - it just works.

The SwitchBot Bot is a great little product that can make an ordinary light switch smart in just two minutes. With the SwitchBot Hub Mini it also works with Google without any problem. You just have to set this up in the excellent SwitchBot App.