{"title":"BAE","description":"","products":[{"product_id":"bae-1023mod-1023-module","title":"BAE 1023 Module EQ\/Mic Pre","description":"\u003ch2\u003eBAE 1023 Module EQ\/Mic Pre\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1023\u003c\/strong\u003e is completely handwired using Carnhill (St. Ives) transformers. It has the exact same mic\/line preamp as the 1073, but with significantly more frequencies in the mid and high sections.\u003c\/p\u003e\n\u003cp\u003eAside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e3 Band Equaliser\u003cbr\u003e\u003cstrong\u003eHF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cstrong\u003eLF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cstrong\u003eMF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-18dB +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cbr\u003e6 LBS\/2.72 KG \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches \u003c\/strong\u003e\u003cbr\u003e45 mm W x 8.75 inches H x 10.5 inches D \u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683344068982,"sku":"SBAE1023MOD","price":3233.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1023modfront.jpg?v=1764866227"},{"product_id":"bae-1023nops-1023-19-1ru-rack-without-power-supply","title":"BAE 1023 - Rackmount EQ\/Mic Pre without Power Supply","description":"\u003ch2\u003eBAE 1023 - Rackmount EQ\/Mic Pre without Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1023\u003c\/strong\u003e is completely handwired using Carnhill (St. Ives) transformers. It has the exact same mic\/line preamp as the 1073, but with significantly more frequencies in the mid and high sections.\u003c\/p\u003e\n\u003cp\u003eAside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Power supply not included\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e3 Band Equaliser\u003cbr\u003e\u003cstrong\u003eHF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cstrong\u003eLF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cstrong\u003eMF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-18dB +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cbr\u003e10 LBS\/4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches \u003c\/strong\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683344560502,"sku":"SBAE1023NOPS","price":2745.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1023front.jpg?v=1764866387"},{"product_id":"bae-1023wps-pair-1023-19-pair-w-power-supply","title":"BAE 1023 PAIR - 2x Rackmount 1023 with Power Supply","description":"\u003ch2\u003eBAE 1023 PAIR - 2x Rackmount 1023 with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1023\u003c\/strong\u003e is completely handwired using Carnhill (St. Ives) transformers. It has the exact same mic\/line preamp as the 1073, but with significantly more frequencies in the mid and high sections.\u003c\/p\u003e\n\u003cp\u003eAside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e3 Band Equaliser\u003cbr\u003e\u003cstrong\u003eHF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cstrong\u003eLF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cstrong\u003eMF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-18dB +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cbr\u003e10 LBS\/4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches \u003c\/strong\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683344789878,"sku":"SBAE1023PAIRWPS","price":5329.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1023pair.jpg?v=1764866887"},{"product_id":"bae-1023wps-1023-19-1ru-rack-w-power-supply","title":"BAE 1023 - Rackmount EQ\/Mic Pre with Power Supply","description":"\u003ch2\u003eBAE 1023 - Rackmount EQ\/Mic Pre with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1023\u003c\/strong\u003e is completely handwired using Carnhill (St. Ives) transformers. It has the exact same mic\/line preamp as the 1073, but with significantly more frequencies in the mid and high sections.\u003c\/p\u003e\n\u003cp\u003eAside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e3 Band Equaliser\u003cbr\u003e\u003cstrong\u003eHF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cstrong\u003eLF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cstrong\u003eMF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-18dB +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cbr\u003e10 LBS\/4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches \u003c\/strong\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683344986486,"sku":"SBAE1023WPS","price":2995.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1023front.jpg?v=1764866387"},{"product_id":"bae-1028mod-1028-module","title":"BAE 1028 Module EQ\/Mic Pre","description":"\u003ch2\u003eBAE 1028 Module EQ\/Mic Pre\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1028\u003c\/strong\u003e is completely hand-wired using Carnhill (St. Ives) transformers. It has the exact same mic\/line preamp as the 1073, but with significantly more frequencies in the mid and hi sections. Aside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways. The 1028 includes the same low pass filter as the 1084, giving it 28 frequencies.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eLow Pass Filter: 18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz, \u0026amp; 18kHz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e3 Band Equaliser\u003cbr\u003e\u003cstrong\u003eHF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cstrong\u003eLF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cstrong\u003eMF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-18dB +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Pass Filter\u003c\/strong\u003e\u003cbr\u003e18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz \u0026amp; 18kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cbr\u003e6 LBS\/2.72 KG \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches\u003c\/strong\u003e\u003cbr\u003e45 mm W x 8.75 inches H x 10.5 inches \u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683345478006,"sku":"SBAE1028MOD","price":3291.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1028modfront.jpg?v=1764867301"},{"product_id":"bae-1028nops-1028-19-1ru-rack-without-power-supply","title":"BAE 1028 - Rackmount EQ\/Mic Pre without Power Supply","description":"\u003ch2\u003eBAE 1028 - Rackmount EQ\/Mic Pre without Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1028\u003c\/strong\u003e is completely hand-wired using Carnhill (St. Ives) transformers. It has the exact same mic\/line preamp as the 1073, but with significantly more frequencies in the mid and hi sections. Aside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways. The 1028 includes the same low pass filter as the 1084, giving it 28 frequencies.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Power supply not included\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eLow Pass Filter: 18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz, \u0026amp; 18kHz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e3 Band Equaliser\u003cbr\u003e\u003cstrong\u003eHF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cstrong\u003eLF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cstrong\u003eMF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-18dB +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Pass Filter\u003c\/strong\u003e\u003cbr\u003e18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz \u0026amp; 18kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cbr\u003e10 LBS\/4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches \u003c\/strong\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683345707382,"sku":"SBAE1028NOPS","price":3743.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1028front.jpg?v=1764867439"},{"product_id":"bae-1028wps-pair-1028-19-pair-w-power-supply","title":"BAE 1028 PAIR - 2x Rackmount 1028 with Power Supply","description":"\u003ch2\u003eBAE 1028 PAIR - 2x Rackmount 1028 with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1028\u003c\/strong\u003e is completely hand-wired using Carnhill (St. Ives) transformers. It has the exact same mic\/line preamp as the 1073, but with significantly more frequencies in the mid and hi sections. Aside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways. The 1028 includes the same low pass filter as the 1084, giving it 28 frequencies.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eLow Pass Filter: 18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz, \u0026amp; 18kHz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e3 Band Equaliser\u003cbr\u003e\u003cstrong\u003eHF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cstrong\u003eLF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cstrong\u003eMF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-18dB +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Pass Filter\u003c\/strong\u003e\u003cbr\u003e18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz \u0026amp; 18kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cbr\u003e10 LBS\/4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches \u003c\/strong\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683346002294,"sku":"SBAE1028PAIRWPS","price":6329.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1028pair.jpg?v=1764867662"},{"product_id":"bae-1028wps-1028-19-1ru-rack-w-power-supply","title":"BAE 1028 - Rackmount EQ\/Mic Pre with Power Supply","description":"\u003ch2\u003eBAE 1028 - Rackmount EQ\/Mic Pre with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1028\u003c\/strong\u003e is completely hand-wired using Carnhill (St. Ives) transformers. It has the exact same mic\/line preamp as the 1073, but with significantly more frequencies in the mid and hi sections. Aside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways. The 1028 includes the same low pass filter as the 1084, giving it 28 frequencies.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eLow Pass Filter: 18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz, \u0026amp; 18kHz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e3 Band Equaliser\u003cbr\u003e\u003cstrong\u003eHF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cstrong\u003eLF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cstrong\u003eMF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-18dB +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Pass Filter\u003c\/strong\u003e\u003cbr\u003e18dB per octave slope, switchable between 6kHz, 8kHz, 10kHz, 14kHz \u0026amp; 18kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight \u003c\/strong\u003e\u003cbr\u003e10 LBS\/4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches \u003c\/strong\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683346329974,"sku":"SBAE1028WPS","price":3312.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1028front.jpg?v=1764867439"},{"product_id":"bae-1032mod-1032-module","title":"BAE 1032 Module EQ\/Mic Pre","description":"\u003ch2\u003eBAE 1032 Module EQ\/Mic Pre\u003c\/h2\u003e\n\u003cp\u003eThe new\u003cstrong\u003e BAE 1032\u003c\/strong\u003e 4-band Mic\/Line preamp by BAE was inspired by the frequencies of the classic 1081. It uses the same high quality components and manufacturing techniques used in other BAE modules featuring the same Class A transformer-coupled circuits and same modular cards for long-term serviceability.\u003c\/p\u003e\n\u003cp\u003eAlong with the passive inductor high-pass filter, the 4-band equalizer provides greater coverage. The high-mid and low-mid frequencies overlap for flexibility in correcting problem frequencies. The 1032 also provides a more comprehensive high frequency shelf up to 24kHz for extended high frequency correction without compromising the midrange.\u003c\/p\u003e\n\u003cp\u003eMany people loved the EQ portion of the 1081 but the amplifier was class A\/B. Our clients told us that they prefer the class A output and so we now have a 1081 inspired equalizer with a 1073 preamp.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspired by the 1081 EQ points using the same inductor specifications.\u003c\/li\u003e\n\u003cli\u003eClass A transformer-coupled.\u003c\/li\u003e\n\u003cli\u003eHand wired, all discrete using modular cards.\u003c\/li\u003e\n\u003cli\u003e4-band with HPF.\u003c\/li\u003e\n\u003cli\u003eLow and High Mid-band overlapping frequencies.\u003c\/li\u003e\n\u003cli\u003eExtended selection for high frequency shelving.\u003c\/li\u003e\n\u003cli\u003eHigh quality Swiss made Elma® rotary switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003e1032 Specifications\u003c\/b\u003e\u003cbr\u003e80dB Class A Microphone preamplifier, HI-LO selectable input impedance, balanced and floating.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-16dB selectable frequency shelving at 10, 12, 16, 20 or 24 kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLow Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-16dB with selectable frequency shelving of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1081 Upper Mid Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-18dB peaking, fixed 'Q' , selectable centre frequencies of 1.5Khz, 1.8kHz, 2.2Khz, 2.7kHz, 3.3Khz, 3.9kHz, 4.7kHz, 5.6kHz , 6.8kHz and 8.2Khz , inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1081 Lower Mid Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-18dB peaking, fixed ´Q´, selectable center frequencies of 220Hz, 270Hz, 330Hz, 390Hz, 470Hz, 560Hz, 680Hz, 820Hz, 1000Hz and 1200Hz, , inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter:\u003c\/b\u003e\u003cbr\u003e18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz, inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEQ Button:\u003c\/b\u003e\u003cbr\u003eEngages the equalizer.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePhase Button:\u003c\/b\u003e\u003cbr\u003eFlips phase180°.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance:\u003c\/b\u003e\u003cbr\u003eHI, 1200 Ohm minimum, LO, 300 Ohm.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance:\u003c\/b\u003e\u003cbr\u003e10KOhms bridging, transformer balanced and floating.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance:\u003c\/b\u003e\u003cbr\u003eLess than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output:\u003c\/b\u003e\u003cbr\u003eGreater than +26dBm into 600 Ohms, greater than +32dBu into 10KOhms.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTHD:\u003c\/b\u003e\u003cbr\u003eLess than 0.025% at 1Khz, Less than 0.05% at 100Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response:\u003c\/b\u003e\u003cbr\u003e20Hz (+0.3dB) to 20Khz (-0.2dB).\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Gain:\u003c\/b\u003e\u003cbr\u003eSlightly greater than 80dB.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNoise:\u003c\/b\u003e\u003cbr\u003eLess than -100dBm.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower consumption:\u003c\/b\u003e\u003cbr\u003e110 mA @24VDC.\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683346723190,"sku":"SBAE1032MOD","price":2915.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1032modfront.jpg?v=1765298039"},{"product_id":"bae-1032nops-1032-19-1ru-rack-without-power-supply","title":"BAE 1032 - Rackmount EQ\/Mic Pre without Power Supply","description":"\u003ch2\u003eBAE 1032 - Rackmount EQ\/Mic Pre without Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe new\u003cstrong\u003e BAE 1032\u003c\/strong\u003e 4-band Mic\/Line preamp by BAE was inspired by the frequencies of the classic 1081. It uses the same high quality components and manufacturing techniques used in other BAE modules featuring the same Class A transformer-coupled circuits and same modular cards for long-term serviceability.\u003c\/p\u003e\n\u003cp\u003eAlong with the passive inductor high-pass filter, the 4-band equalizer provides greater coverage. The high-mid and low-mid frequencies overlap for flexibility in correcting problem frequencies. The 1032 also provides a more comprehensive high frequency shelf up to 24kHz for extended high frequency correction without compromising the midrange.\u003c\/p\u003e\n\u003cp\u003eMany people loved the EQ portion of the 1081 but the amplifier was class A\/B. Our clients told us that they prefer the class A output and so we now have a 1081 inspired equalizer with a 1073 preamp.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Power supply not included\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspired by the 1081 EQ points using the same inductor specifications.\u003c\/li\u003e\n\u003cli\u003eClass A transformer-coupled.\u003c\/li\u003e\n\u003cli\u003eHand wired, all discrete using modular cards.\u003c\/li\u003e\n\u003cli\u003e4-band with HPF.\u003c\/li\u003e\n\u003cli\u003eLow and High Mid-band overlapping frequencies.\u003c\/li\u003e\n\u003cli\u003eExtended selection for high frequency shelving.\u003c\/li\u003e\n\u003cli\u003eHigh quality Swiss made Elma® rotary switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003e1032 Specifications\u003c\/b\u003e\u003cbr\u003e80dB Class A Microphone preamplifier, HI-LO selectable input impedance, balanced and floating.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-16dB selectable frequency shelving at 10, 12, 16, 20 or 24 kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLow Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-16dB with selectable frequency shelving of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1081 Upper Mid Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-18dB peaking, fixed 'Q' , selectable centre frequencies of 1.5Khz, 1.8kHz, 2.2Khz, 2.7kHz, 3.3Khz, 3.9kHz, 4.7kHz, 5.6kHz , 6.8kHz and 8.2Khz , inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1081 Lower Mid Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-18dB peaking, fixed ´Q´, selectable center frequencies of 220Hz, 270Hz, 330Hz, 390Hz, 470Hz, 560Hz, 680Hz, 820Hz, 1000Hz and 1200Hz, , inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter:\u003c\/b\u003e\u003cbr\u003e18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz, inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEQ Button:\u003c\/b\u003e\u003cbr\u003eEngages the equalizer.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePhase Button:\u003c\/b\u003e\u003cbr\u003eFlips phase180°.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance:\u003c\/b\u003e\u003cbr\u003eHI, 1200 Ohm minimum, LO, 300 Ohm.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance:\u003c\/b\u003e\u003cbr\u003e10KOhms bridging, transformer balanced and floating.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance:\u003c\/b\u003e\u003cbr\u003eLess than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output:\u003c\/b\u003e\u003cbr\u003eGreater than +26dBm into 600 Ohms, greater than +32dBu into 10KOhms.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTHD:\u003c\/b\u003e\u003cbr\u003eLess than 0.025% at 1Khz, Less than 0.05% at 100Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response:\u003c\/b\u003e\u003cbr\u003e20Hz (+0.3dB) to 20Khz (-0.2dB).\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Gain:\u003c\/b\u003e\u003cbr\u003eSlightly greater than 80dB.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNoise:\u003c\/b\u003e\u003cbr\u003eLess than -100dBm.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower consumption:\u003c\/b\u003e\u003cbr\u003e110 mA @24VDC.\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683347083638,"sku":"SBAE1032NOPS","price":3320.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1032front.jpg?v=1765298205"},{"product_id":"bae-1032wps-pair-1028-19-pair-w-power-supply","title":"BAE 1032 PAIR - 2x Rackmount 1032 with Power Supply","description":"\u003ch2\u003eBAE 1032 PAIR - 2x Rackmount 1032 with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe new\u003cstrong\u003e BAE 1032\u003c\/strong\u003e 4-band Mic\/Line preamp by BAE was inspired by the frequencies of the classic 1081. It uses the same high quality components and manufacturing techniques used in other BAE modules featuring the same Class A transformer-coupled circuits and same modular cards for long-term serviceability.\u003c\/p\u003e\n\u003cp\u003eAlong with the passive inductor high-pass filter, the 4-band equalizer provides greater coverage. The high-mid and low-mid frequencies overlap for flexibility in correcting problem frequencies. The 1032 also provides a more comprehensive high frequency shelf up to 24kHz for extended high frequency correction without compromising the midrange.\u003c\/p\u003e\n\u003cp\u003eMany people loved the EQ portion of the 1081 but the amplifier was class A\/B. Our clients told us that they prefer the class A output and so we now have a 1081 inspired equalizer with a 1073 preamp.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspired by the 1081 EQ points using the same inductor specifications.\u003c\/li\u003e\n\u003cli\u003eClass A transformer-coupled.\u003c\/li\u003e\n\u003cli\u003eHand wired, all discrete using modular cards.\u003c\/li\u003e\n\u003cli\u003e4-band with HPF.\u003c\/li\u003e\n\u003cli\u003eLow and High Mid-band overlapping frequencies.\u003c\/li\u003e\n\u003cli\u003eExtended selection for high frequency shelving.\u003c\/li\u003e\n\u003cli\u003eHigh quality Swiss made Elma® rotary switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003e1032 Specifications\u003c\/b\u003e\u003cbr\u003e80dB Class A Microphone preamplifier, HI-LO selectable input impedance, balanced and floating.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-16dB selectable frequency shelving at 10, 12, 16, 20 or 24 kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLow Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-16dB with selectable frequency shelving of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1081 Upper Mid Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-18dB peaking, fixed 'Q' , selectable centre frequencies of 1.5Khz, 1.8kHz, 2.2Khz, 2.7kHz, 3.3Khz, 3.9kHz, 4.7kHz, 5.6kHz , 6.8kHz and 8.2Khz , inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1081 Lower Mid Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-18dB peaking, fixed ´Q´, selectable center frequencies of 220Hz, 270Hz, 330Hz, 390Hz, 470Hz, 560Hz, 680Hz, 820Hz, 1000Hz and 1200Hz, , inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter:\u003c\/b\u003e\u003cbr\u003e18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz, inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEQ Button:\u003c\/b\u003e\u003cbr\u003eEngages the equalizer.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePhase Button:\u003c\/b\u003e\u003cbr\u003eFlips phase180°.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance:\u003c\/b\u003e\u003cbr\u003eHI, 1200 Ohm minimum, LO, 300 Ohm.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance:\u003c\/b\u003e\u003cbr\u003e10KOhms bridging, transformer balanced and floating.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance:\u003c\/b\u003e\u003cbr\u003eLess than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output:\u003c\/b\u003e\u003cbr\u003eGreater than +26dBm into 600 Ohms, greater than +32dBu into 10KOhms.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTHD:\u003c\/b\u003e\u003cbr\u003eLess than 0.025% at 1Khz, Less than 0.05% at 100Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response:\u003c\/b\u003e\u003cbr\u003e20Hz (+0.3dB) to 20Khz (-0.2dB).\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Gain:\u003c\/b\u003e\u003cbr\u003eSlightly greater than 80dB.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNoise:\u003c\/b\u003e\u003cbr\u003eLess than -100dBm.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower consumption:\u003c\/b\u003e\u003cbr\u003e110 mA @24VDC.\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683347345782,"sku":"SBAE1032PAIRWPS","price":6415.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1032pair.jpg?v=1765298523"},{"product_id":"bae-1032wps-1032-19-1ru-rack-w-power-supply","title":"BAE 1032 - Rackmount EQ\/Mic Pre with Power Supply","description":"\u003ch2\u003eBAE 1032 - Rackmount EQ\/Mic Pre with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe new\u003cstrong\u003e BAE 1032\u003c\/strong\u003e 4-band Mic\/Line preamp by BAE was inspired by the frequencies of the classic 1081. It uses the same high quality components and manufacturing techniques used in other BAE modules featuring the same Class A transformer-coupled circuits and same modular cards for long-term serviceability.\u003c\/p\u003e\n\u003cp\u003eAlong with the passive inductor high-pass filter, the 4-band equalizer provides greater coverage. The high-mid and low-mid frequencies overlap for flexibility in correcting problem frequencies. The 1032 also provides a more comprehensive high frequency shelf up to 24kHz for extended high frequency correction without compromising the midrange.\u003c\/p\u003e\n\u003cp\u003eMany people loved the EQ portion of the 1081 but the amplifier was class A\/B. Our clients told us that they prefer the class A output and so we now have a 1081 inspired equalizer with a 1073 preamp.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspired by the 1081 EQ points using the same inductor specifications.\u003c\/li\u003e\n\u003cli\u003eClass A transformer-coupled.\u003c\/li\u003e\n\u003cli\u003eHand wired, all discrete using modular cards.\u003c\/li\u003e\n\u003cli\u003e4-band with HPF.\u003c\/li\u003e\n\u003cli\u003eLow and High Mid-band overlapping frequencies.\u003c\/li\u003e\n\u003cli\u003eExtended selection for high frequency shelving.\u003c\/li\u003e\n\u003cli\u003eHigh quality Swiss made Elma® rotary switches.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003e1032 Specifications\u003c\/b\u003e\u003cbr\u003e80dB Class A Microphone preamplifier, HI-LO selectable input impedance, balanced and floating.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-16dB selectable frequency shelving at 10, 12, 16, 20 or 24 kHz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLow Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-16dB with selectable frequency shelving of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1081 Upper Mid Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-18dB peaking, fixed 'Q' , selectable centre frequencies of 1.5Khz, 1.8kHz, 2.2Khz, 2.7kHz, 3.3Khz, 3.9kHz, 4.7kHz, 5.6kHz , 6.8kHz and 8.2Khz , inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e1081 Lower Mid Frequency:\u003c\/b\u003e\u003cbr\u003e+\/-18dB peaking, fixed ´Q´, selectable center frequencies of 220Hz, 270Hz, 330Hz, 390Hz, 470Hz, 560Hz, 680Hz, 820Hz, 1000Hz and 1200Hz, , inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter:\u003c\/b\u003e\u003cbr\u003e18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz, inductor based.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEQ Button:\u003c\/b\u003e\u003cbr\u003eEngages the equalizer.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePhase Button:\u003c\/b\u003e\u003cbr\u003eFlips phase180°.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance:\u003c\/b\u003e\u003cbr\u003eHI, 1200 Ohm minimum, LO, 300 Ohm.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance:\u003c\/b\u003e\u003cbr\u003e10KOhms bridging, transformer balanced and floating.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance:\u003c\/b\u003e\u003cbr\u003eLess than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output:\u003c\/b\u003e\u003cbr\u003eGreater than +26dBm into 600 Ohms, greater than +32dBu into 10KOhms.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTHD:\u003c\/b\u003e\u003cbr\u003eLess than 0.025% at 1Khz, Less than 0.05% at 100Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response:\u003c\/b\u003e\u003cbr\u003e20Hz (+0.3dB) to 20Khz (-0.2dB).\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Gain:\u003c\/b\u003e\u003cbr\u003eSlightly greater than 80dB.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNoise:\u003c\/b\u003e\u003cbr\u003eLess than -100dBm.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower consumption:\u003c\/b\u003e\u003cbr\u003e110 mA @24VDC.\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683347673462,"sku":"SBAE1032WPS","price":3487.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1032front.jpg?v=1765298205"},{"product_id":"bae-1066dmod-1066-module","title":"BAE 1066D Module EQ\/Mic Pre","description":"\u003ch2\u003eBAE 1066D Module EQ\/Mic Pre\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1066D\u003c\/strong\u003e is completely hand-wired using Carnhill (St. Ives) transformers and has the same mic-line pre-amp as the 1073, with the exception that the 1066D adds a few different frequencies to your pallet.\u003c\/p\u003e\n\u003cp\u003eThis unit is popular among guitarists for having a unique mid-range. The original 1066 only had a 10k shelving but this unit offers additional frequencies: 10k Hz,12k Hz,16k Hz, 20k Hz and 24k Hz.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp;220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e3 Band Equaliser\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHF:\u003c\/b\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cb\u003eLF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cb\u003eMF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e6 LBS \/ 2.72 KG\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions\u003c\/b\u003e\u003cbr\u003e45 mm W x 8.75 inches H x 10.5 inches D\u003cbr\u003e\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683347902838,"sku":"SBAE1066DMOD","price":1999.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1066modfront.jpg?v=1765298973"},{"product_id":"bae-1066dnops-1066-19-1ru-rack-without-power-supply","title":"BAE 1066D - Rackmount EQ\/Mic Pre without Power Supply","description":"\u003ch2\u003eBAE 1066D - Rackmount EQ\/Mic Pre without Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1066D\u003c\/strong\u003e is completely hand-wired using Carnhill (St. Ives) transformers and has the same mic-line pre-amp as the 1073, with the exception that the 1066D adds a few different frequencies to your pallet.\u003c\/p\u003e\n\u003cp\u003eThis unit is popular among guitarists for having a unique mid-range. The original 1066 only had a 10k shelving but this unit offers additional frequencies: 10k Hz,12k Hz,16k Hz, 20k Hz and 24k Hz.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Power supply not included\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp;220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e3 Band Equaliser\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHF:\u003c\/b\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cb\u003eLF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cb\u003eMF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e10 LBS \/ 4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions in Inches \u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683348263286,"sku":"SBAE1066DNOPS","price":2487.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1066front.jpg?v=1765299169"},{"product_id":"bae-1066dwps-pair-1066-19-pair-w-power-supply","title":"BAE 1066D PAIR - 2x Rackmount 1066D with Power Supply","description":"\u003ch2\u003eBAE 1066D PAIR - 2x Rackmount 1066D with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1066D\u003c\/strong\u003e is completely hand-wired using Carnhill (St. Ives) transformers and has the same mic-line pre-amp as the 1073, with the exception that the 1066D adds a few different frequencies to your pallet.\u003c\/p\u003e\n\u003cp\u003eThis unit is popular among guitarists for having a unique mid-range. The original 1066 only had a 10k shelving but this unit offers additional frequencies: 10k Hz,12k Hz,16k Hz, 20k Hz and 24k Hz.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp;220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e3 Band Equaliser\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHF:\u003c\/b\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cb\u003eLF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cb\u003eMF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e10 LBS \/ 4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions in Inches \u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683348427126,"sku":"SBAE1066DPAIRWPS","price":5062.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1066pair.jpg?v=1765299518"},{"product_id":"bae-1066dwps-1066-19-1ru-rack-w-power-supply","title":"BAE 1066D - Rackmount EQ\/Mic Pre with Power Supply","description":"\u003ch2\u003eBAE 1066D - Rackmount EQ\/Mic Pre with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1066D\u003c\/strong\u003e is completely hand-wired using Carnhill (St. Ives) transformers and has the same mic-line pre-amp as the 1073, with the exception that the 1066D adds a few different frequencies to your pallet.\u003c\/p\u003e\n\u003cp\u003eThis unit is popular among guitarists for having a unique mid-range. The original 1066 only had a 10k shelving but this unit offers additional frequencies: 10k Hz,12k Hz,16k Hz, 20k Hz and 24k Hz.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp;220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e3 Band Equaliser\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHF:\u003c\/b\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cb\u003eLF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cb\u003eMF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e10 LBS \/ 4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions in Inches \u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683349344630,"sku":"SBAE1066DWPS","price":2654.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1066front.jpg?v=1765299169"},{"product_id":"bae-1073-dmp-desktop-mic-pre","title":"BAE 1073 DMP - Desktop Mic Pre","description":"\u003ch2\u003eBAE 1073 DMP - Desktop Mic Pre\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e1073 DMP\u003c\/strong\u003e features the same pre-amp and the same Carnhill (St Ives) transformers as the 1073 and 1084.\u003c\/p\u003e\n\u003cp\u003eAll units come standard with the 'Bootsy Collins' mod which consists of an OEP Carnhill DI transformer to create the first 1073 direct box. The 1073DMP features include two DI thrus, phase reverse, 48V for phantom power, a built in PSU for extra portability and the same hand-wired modular design that BAE is known for.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt in PSU for extra portability.\u003c\/li\u003e\n\u003cli\u003eDI in and DI through.\u003c\/li\u003e\n\u003cli\u003e48v for phantom power.\u003c\/li\u003e\n\u003cli\u003eSolid steel chassis.\u003c\/li\u003e\n\u003cli\u003eSame hand-wired modular design that BAE is known for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Pre Input Impedance\u003c\/b\u003e\u003cbr\u003e≅1200 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≅150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain Voltage\u003c\/b\u003e\u003cbr\u003e0 to 33.4 Volts\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 71 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight\u003c\/b\u003e\u003cbr\u003e7.3 LBS\/3.31 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (Inches)\u003c\/b\u003e\u003cbr\u003e5.3W x 4L x 11D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683349803382,"sku":"SBAE1073DMP","price":999.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073DMP.jpg?v=1764165302"},{"product_id":"bae-1073-dmps-stereo-1073dmp","title":"BAE 1073 Dual DMP - Stereo Desktop Mic Pre","description":"\u003ch2\u003eBAE 1073 Dual DMP - Stereo Desktop Mic Pre\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e1073 Dual DMP\u003c\/strong\u003e features the same pre-amps and the same Carnhill (St Ives) transformers as the 1073 and 1084.\u003c\/p\u003e\n\u003cp\u003eAll units come standard with the 'Bootsy Collins' mod (channel one ONLY) which consists of an OEP Carnhill DI transformer to create the first 1073 direct box. The Dual DMP features include two DI thrus, phase reverse, 48V for phantom power, a built in PSU for extra portability and the same hand-wired modular design that BAE is known for.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt in PSU for extra portability.\u003c\/li\u003e\n\u003cli\u003eDI in and DI through.\u003c\/li\u003e\n\u003cli\u003e48v for phantom power.\u003c\/li\u003e\n\u003cli\u003eSolid steel chassis.\u003c\/li\u003e\n\u003cli\u003eSame hand-wired modular design that BAE is known for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Pre Input Impedance\u003c\/b\u003e\u003cbr\u003e≅1200 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≅150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain Voltage\u003c\/b\u003e\u003cbr\u003e0 to 33.4 Volts\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 71 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683349999990,"sku":"SBAE1073DMPS","price":1995.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073DMPDual.jpg?v=1764165972"},{"product_id":"bae-1073mod-1073-module","title":"BAE 1073 Module EQ\/Mic Pre","description":"\u003ch2\u003eBAE 1073 Module EQ\/Mic Pre\u003c\/h2\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBAE 1073\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.\u003c\/p\u003e\n\u003cp\u003eThe BAE 1073 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB fixed frequency shelving at 12kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e3 Band Equaliser\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHF:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 12kHz\u003cbr\u003e\u003cb\u003eLF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cb\u003eMF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e35 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683350229366,"sku":"SBAE1073MOD","price":2304.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073Modfront.jpg?v=1764174479"},{"product_id":"bae-1073mp-dual-channel-w-out-power-supply","title":"BAE 1073MP - Dual Channel Rackmount Mic Pre without Power Supply","description":"\u003ch2\u003eBAE 1073MP - Dual Channel Rackmount Mic Pre without Power Supply\u003c\/h2\u003e\n\u003cp\u003eThis is the mic pre-amp version of the 1073 equaliser having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.\u003c\/p\u003e\n\u003cp\u003eA Carnhill transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones.\u003c\/p\u003e\n\u003cp\u003eThere is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.\u003c\/p\u003e\n\u003cp\u003eAs a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Power supply not included\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll Class A, transformer-coupled design in a 19\" 1U chassis.\u003c\/li\u003e\n\u003cli\u003eLine level XLR inputs for extra versatility as a line preamp.\u003c\/li\u003e\n\u003cli\u003eHigh impedance DI for guitar and synth.\u003c\/li\u003e\n\u003cli\u003eThe same Class A components as the 1073 and 1084.\u003c\/li\u003e\n\u003cli\u003eIlluminated phase reverse and phantom power push-buttons.\u003c\/li\u003e\n\u003cli\u003eInput impedance selector switch between 1200 and 300 ohms.\u003c\/li\u003e\n\u003cli\u003eSame modular design and hand-wiring BAE is known for.\u003c\/li\u003e\n\u003cli\u003eRegulated linear power supply will run up to four channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 30W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 71 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e10 LBS\/4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (Inches)\u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683352883574,"sku":"SBAE1073MPDUALNOPS","price":1745.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073MPdual.jpg?v=1764173650"},{"product_id":"bae-1073mp-dual-channel-w-power-supply","title":"BAE 1073MP - Dual Channel Rackmount Mic Pre with Power Supply","description":"\u003ch2\u003eBAE 1073MP - Dual Channel Rackmount Mic Pre with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThis is the mic pre-amp version of the 1073 equaliser having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.\u003c\/p\u003e\n\u003cp\u003eA Carnhill transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones.\u003c\/p\u003e\n\u003cp\u003eThere is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.\u003c\/p\u003e\n\u003cp\u003eAs a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll Class A, transformer-coupled design in a 19\" 1U chassis.\u003c\/li\u003e\n\u003cli\u003eLine level XLR inputs for extra versatility as a line preamp.\u003c\/li\u003e\n\u003cli\u003eHigh impedance DI for guitar and synth.\u003c\/li\u003e\n\u003cli\u003eThe same Class A components as the 1073 and 1084.\u003c\/li\u003e\n\u003cli\u003eIlluminated phase reverse and phantom power push-buttons.\u003c\/li\u003e\n\u003cli\u003eInput impedance selector switch between 1200 and 300 ohms.\u003c\/li\u003e\n\u003cli\u003eSame modular design and hand-wiring BAE is known for.\u003c\/li\u003e\n\u003cli\u003eRegulated linear power supply will run up to four channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 30W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 71 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e10 LBS\/4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (Inches)\u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683353276790,"sku":"SBAE1073MPDUALWPS","price":1912.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073MPdual.jpg?v=1764173650"},{"product_id":"bae-1073mpf-dual-channel-w-filter-no-power-supply","title":"BAE 1073MPF - Dual Channel Rackmount HPF Mic Pre without Power Supply","description":"\u003ch2\u003eBAE 1073MPF - Dual Channel Rackmount HPF Mic Pre without Power Supply\u003c\/h2\u003e\n\u003cp\u003eThis is the high-pass filter version of the 1073MP. The \u003cstrong\u003e1073MPF\u003c\/strong\u003e is the mic pre-amp version of the 1073 equaliser, sharing the the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs and maintained focused mids.\u003c\/p\u003e\n\u003cp\u003eA transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones.\u003c\/p\u003e\n\u003cp\u003eThere is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.\u003c\/p\u003e\n\u003cp\u003eAs a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Power supply not included\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll Class A, transformer-coupled design in a 19\" 1U chassis.\u003c\/li\u003e\n\u003cli\u003eInductor based high pass filter\u003c\/li\u003e\n\u003cli\u003eLine level XLR inputs for extra versatility as a line preamp.\u003c\/li\u003e\n\u003cli\u003eHigh impedance DI for guitar and synth.\u003c\/li\u003e\n\u003cli\u003eThe same Class A components as the 1073 and 1084.\u003c\/li\u003e\n\u003cli\u003eIlluminated phase reverse and phantom power pushbuttons.\u003c\/li\u003e\n\u003cli\u003eInput impedance selector switch between 1200 and 300 ohms.\u003c\/li\u003e\n\u003cli\u003eSame modular design and hand-wiring BAE is known for.\u003c\/li\u003e\n\u003cli\u003eRegulated linear power supply will run up to four channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e50Hz, 80Hz, 160Hz, 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 30W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 71 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e10 LBS \/ 4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (Inches)\u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683353506166,"sku":"SBAE1073MPFDUALNOPS","price":2082.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073MPFDualfront.jpg?v=1765297385"},{"product_id":"bae-1073mpf-dual-channel-w-filter-power-supply","title":"BAE 1073MPF - Dual Channel Rackmount HPF Mic Pre with Power Supply","description":"\u003ch2\u003eBAE 1073MPF - Dual Channel Rackmount HPF Mic Pre with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThis is the high-pass filter version of the 1073MP. The \u003cstrong\u003e1073MPF\u003c\/strong\u003e is the mic pre-amp version of the 1073 equaliser, sharing the the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs and maintained focused mids.\u003c\/p\u003e\n\u003cp\u003eA transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones.\u003c\/p\u003e\n\u003cp\u003eThere is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.\u003c\/p\u003e\n\u003cp\u003eAs a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll Class A, transformer-coupled design in a 19\" 1U chassis.\u003c\/li\u003e\n\u003cli\u003eInductor based high pass filter\u003c\/li\u003e\n\u003cli\u003eLine level XLR inputs for extra versatility as a line preamp.\u003c\/li\u003e\n\u003cli\u003eHigh impedance DI for guitar and synth.\u003c\/li\u003e\n\u003cli\u003eThe same Class A components as the 1073 and 1084.\u003c\/li\u003e\n\u003cli\u003eIlluminated phase reverse and phantom power pushbuttons.\u003c\/li\u003e\n\u003cli\u003eInput impedance selector switch between 1200 and 300 ohms.\u003c\/li\u003e\n\u003cli\u003eSame modular design and hand-wiring BAE is known for.\u003c\/li\u003e\n\u003cli\u003eRegulated linear power supply will run up to four channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e50Hz, 80Hz, 160Hz, 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 30W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 71 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e10 LBS \/ 4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (Inches)\u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683353866614,"sku":"SBAE1073MPFDUALWPS","price":2249.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073MPFDualfront.jpg?v=1765297385"},{"product_id":"bae-1073mpf-single-channel-w-filter-no-power-supply","title":"BAE 1073MPF - Single Channel Rackmount HPF Mic Pre without Power Supply","description":"\u003ch2\u003eBAE 1073MPF - Single Channel Rackmount HPF Mic Pre without Power Supply\u003c\/h2\u003e\n\u003cp\u003eThis is the high-pass filter version of the 1073MP. The \u003cstrong\u003e1073MPF\u003c\/strong\u003e is the mic pre-amp version of the 1073 equaliser, sharing the the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs and maintained focused mids.\u003c\/p\u003e\n\u003cp\u003eA transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones.\u003c\/p\u003e\n\u003cp\u003eThere is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.\u003c\/p\u003e\n\u003cp\u003eAs a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Power supply not included\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll Class A, transformer-coupled design in a 19\" 1U chassis.\u003c\/li\u003e\n\u003cli\u003eInductor based high pass filter\u003c\/li\u003e\n\u003cli\u003eLine level XLR inputs for extra versatility as a line preamp.\u003c\/li\u003e\n\u003cli\u003eHigh impedance DI for guitar and synth.\u003c\/li\u003e\n\u003cli\u003eThe same Class A components as the 1073 and 1084.\u003c\/li\u003e\n\u003cli\u003eIlluminated phase reverse and phantom power pushbuttons.\u003c\/li\u003e\n\u003cli\u003eInput impedance selector switch between 1200 and 300 ohms.\u003c\/li\u003e\n\u003cli\u003eSame modular design and hand-wiring BAE is known for.\u003c\/li\u003e\n\u003cli\u003eRegulated linear power supply will run up to four channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e50Hz, 80Hz, 160Hz, 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 30W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 71 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e8 LBS \/ 3.63 KG\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (Inches)\u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683354161526,"sku":"SBAE1073MPFSINNOPS","price":1132.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073MPFSinglefront.jpg?v=1765297005"},{"product_id":"bae-1073mpf-single-channel-w-filter-power-supply","title":"BAE 1073MPF - Single Channel Rackmount HPF Mic Pre with Power Supply","description":"\u003ch2\u003eBAE 1073MPF - Single Channel Rackmount HPF Mic Pre with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThis is the high-pass filter version of the 1073MP. The \u003cstrong\u003e1073MPF\u003c\/strong\u003e is the mic pre-amp version of the 1073 equaliser, sharing the the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs and maintained focused mids.\u003c\/p\u003e\n\u003cp\u003eA transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones.\u003c\/p\u003e\n\u003cp\u003eThere is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.\u003c\/p\u003e\n\u003cp\u003eAs a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAll Class A, transformer-coupled design in a 19\" 1U chassis.\u003c\/li\u003e\n\u003cli\u003eInductor based high pass filter\u003c\/li\u003e\n\u003cli\u003eLine level XLR inputs for extra versatility as a line preamp.\u003c\/li\u003e\n\u003cli\u003eHigh impedance DI for guitar and synth.\u003c\/li\u003e\n\u003cli\u003eThe same Class A components as the 1073 and 1084.\u003c\/li\u003e\n\u003cli\u003eIlluminated phase reverse and phantom power pushbuttons.\u003c\/li\u003e\n\u003cli\u003eInput impedance selector switch between 1200 and 300 ohms.\u003c\/li\u003e\n\u003cli\u003eSame modular design and hand-wiring BAE is known for.\u003c\/li\u003e\n\u003cli\u003eRegulated linear power supply will run up to four channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e50Hz, 80Hz, 160Hz, 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 30W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 71 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e8 LBS \/ 3.63 KG\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (Inches)\u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683354587510,"sku":"SBAE1073MPFSINWPS","price":1249.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073MPFSinglefront.jpg?v=1765297005"},{"product_id":"bae-1073mp-single-channel-w-out-power-supply","title":"BAE 1073MP - Single Channel Rackmount Mic Pre without Power Supply","description":"\u003ch2\u003eBAE 1073MP - Single Channel Rackmount Mic Pre without Power Supply\u003c\/h2\u003e\n\u003cp\u003eThis is the mic pre-amp version of the 1073 equaliser having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.\u003c\/p\u003e\n\u003cp\u003eA Carnhill transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones.\u003c\/p\u003e\n\u003cp\u003eThere is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.\u003c\/p\u003e\n\u003cp\u003eAs a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Power supply not included\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll Class A, transformer-coupled design in a 19\" 1U chassis.\u003c\/li\u003e\n\u003cli\u003eLine level XLR inputs for extra versatility as a line preamp.\u003c\/li\u003e\n\u003cli\u003eHigh impedance DI for guitar and synth.\u003c\/li\u003e\n\u003cli\u003eThe same Class A components as the 1073 and 1084.\u003c\/li\u003e\n\u003cli\u003eIlluminated phase reverse and phantom power push-buttons.\u003c\/li\u003e\n\u003cli\u003eInput impedance selector switch between 1200 and 300 ohms.\u003c\/li\u003e\n\u003cli\u003eSame modular design and hand-wiring BAE is known for.\u003c\/li\u003e\n\u003cli\u003eRegulated linear power supply will run up to four channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 30W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 71 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e8 LBS\/3.63 KG\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (Inches)\u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683355079030,"sku":"SBAE1073MPSINNOPS","price":915.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073MPsingle.jpg?v=1764172769"},{"product_id":"bae-1073mp-single-channel-w-power-supply","title":"BAE 1073MP - Single Channel Rackmount Mic Pre with Power Supply","description":"\u003ch2\u003eBAE 1073MP - Single Channel Rackmount Mic Pre with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThis is the mic pre-amp version of the 1073 equaliser having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.\u003c\/p\u003e\n\u003cp\u003eA Carnhill transformer coupled input, with two selectable impedances makes the 1073MP work well with a variety of microphones.\u003c\/p\u003e\n\u003cp\u003eThere is also a line input feature for adding depth to 2-bus mixes and a DI input for all passive and active instruments.\u003c\/p\u003e\n\u003cp\u003eAs a coloured and versatile mic-pre, the 1073MP maintains its sonic signature across a wide bandwidth.\u003c\/p\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAll Class A, transformer-coupled design in a 19\" 1U chassis.\u003c\/li\u003e\n\u003cli\u003eLine level XLR inputs for extra versatility as a line preamp.\u003c\/li\u003e\n\u003cli\u003eHigh impedance DI for guitar and synth.\u003c\/li\u003e\n\u003cli\u003eThe same Class A components as the 1073 and 1084.\u003c\/li\u003e\n\u003cli\u003eIlluminated phase reverse and phantom power push-buttons.\u003c\/li\u003e\n\u003cli\u003eInput impedance selector switch between 1200 and 300 ohms.\u003c\/li\u003e\n\u003cli\u003eSame modular design and hand-wiring BAE is known for.\u003c\/li\u003e\n\u003cli\u003eRegulated linear power supply will run up to four channels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 30W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 71 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight \u003c\/b\u003e\u003cbr\u003e8 LBS\/3.63 KG\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (Inches)\u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683355373942,"sku":"SBAE1073MPSINWPS","price":1082.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073MPsingle.jpg?v=1764172769"},{"product_id":"bae-1073nops-1073-19-1ru-rack-without-power-supply","title":"BAE 1073 - Rackmount EQ\/Mic Pre without Power Supply","description":"\u003ch2\u003eBAE 1073 - Rackmount EQ\/Mic Pre without Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1073\u003c\/strong\u003e is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.\u003c\/p\u003e\n\u003cp\u003eThe BAE 1073 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Power supply not included\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB fixed frequency shelving at 12kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e3 Band Equaliser\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHF:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 12kHz\u003cbr\u003e\u003cb\u003eLF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cb\u003eMF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e35 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight\u003c\/b\u003e\u003cbr\u003eRackmount: 12 LBS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions in Inches\u003c\/b\u003e\u003cbr\u003e19W x  1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683355865462,"sku":"SBAE1073NOPS","price":2829.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073rackfront.jpg?v=1764087650"},{"product_id":"bae-1073wps-pair-1073-19-pair-w-power-supply","title":"BAE 1073 PAIR - 2x Rackmount 1073 with Power Supply","description":"\u003ch2\u003eBAE 1073 PAIR - 2x Rackmount 1073 with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBAE 1073\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.\u003c\/p\u003e\n\u003cp\u003eThe BAE 1073 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB fixed frequency shelving at 12kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e3 Band Equaliser\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHF:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 12kHz\u003cbr\u003e\u003cb\u003eLF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cb\u003eMF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e35 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight\u003c\/b\u003e\u003cbr\u003eRackmount: 12 LBS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions in Inches\u003c\/b\u003e\u003cbr\u003e19W x  1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683356225910,"sku":"SBAE1073PAIRWPS","price":5312.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073pair.jpg?v=1764091717"},{"product_id":"bae-1073wps-1073-19-1ru-rack-w-power-supply","title":"BAE 1073 - Rackmount EQ\/Mic Pre with Power Supply","description":"\u003ch2\u003eBAE 1073 - Rackmount EQ\/Mic Pre with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBAE 1073\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.\u003c\/p\u003e\n\u003cp\u003eThe BAE 1073 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB fixed frequency shelving at 12kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications:\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e3 Band Equaliser\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHF:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 12kHz\u003cbr\u003e\u003cb\u003eLF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cb\u003eMF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e35 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight\u003c\/b\u003e\u003cbr\u003eRackmount: 12 LBS\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions in Inches\u003c\/b\u003e\u003cbr\u003e19W x  1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683356422518,"sku":"SBAE1073WPS","price":2995.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073rackfront.jpg?v=1764087650"},{"product_id":"bae-1084mod-1084-module","title":"BAE 1084 Module EQ\/Mic Pre","description":"\u003ch2\u003eBAE 1084 Module EQ\/Mic Pre\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1084\u003c\/strong\u003e is as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.\u003c\/p\u003e\n\u003cp\u003eThe BAE 1084 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz and 16kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable 'High Q', selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 Band Equaliser\u003c\/strong\u003e\u003cbr\u003eHF:+\/-16dB fixed frequency shelving at 10kHz, 12kHz and 16kHz\u003cbr\u003eLF: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003eMF: +\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Pass Filter\u003c\/strong\u003e\u003cbr\u003e6kHz, 8kHz, 10kHz, 14kHz, \u0026amp; 18kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e6 LBS\/2.72 KG\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches\u003c\/strong\u003e\u003cbr\u003e45 mm W x 8.75 inches H x 10.5 inches D\u003cbr\u003e\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683356946806,"sku":"SBAE1084MOD","price":2779.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1084Modfront.jpg?v=1764176753"},{"product_id":"bae-1084nops-1084-19-1ru-rack-without-power-supply","title":"BAE 1084 - Rackmount EQ\/Mic Pre without Power Supply","description":"\u003ch2\u003eBAE 1084 - Rackmount EQ\/Mic Pre without Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBAE 1084\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.\u003c\/p\u003e\n\u003cp\u003eThe BAE 1084 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003e*Power supply not included\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz and 16kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable 'High Q', selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 Band Equaliser\u003c\/strong\u003e\u003cbr\u003eHF:+\/-16dB fixed frequency shelving at 10kHz, 12kHz and 16kHz\u003cbr\u003eLF: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003eMF: +\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Pass Filter\u003c\/strong\u003e\u003cbr\u003e6kHz, 8kHz, 10kHz, 14kHz, \u0026amp; 18kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e10 LBS\/4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches\u003c\/strong\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683357340022,"sku":"SBAE1084NOPS","price":2945.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1084front.jpg?v=1764177547"},{"product_id":"bae-1084wps-pair-1084-19-pair-w-power-supply","title":"BAE 1084 PAIR - 2x Rackmount 1084 with Power Supply","description":"\u003ch2\u003eBAE 1084 PAIR - 2x Rackmount 1084 with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBAE 1084\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.\u003c\/p\u003e\n\u003cp\u003eThe BAE 1084 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz and 16kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable 'High Q', selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 Band Equaliser\u003c\/strong\u003e\u003cbr\u003eHF:+\/-16dB fixed frequency shelving at 10kHz, 12kHz and 16kHz\u003cbr\u003eLF: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003eMF: +\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Pass Filter\u003c\/strong\u003e\u003cbr\u003e6kHz, 8kHz, 10kHz, 14kHz, \u0026amp; 18kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e10 LBS\/4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches\u003c\/strong\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683359273334,"sku":"SBAE1084PAIRWPS","price":5987.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1084pair.jpg?v=1764177868"},{"product_id":"bae-1084wps-1084-19-1ru-rack-w-power-supply","title":"BAE 1084 - Rackmount EQ\/Mic Pre with Power Supply","description":"\u003ch2\u003eBAE 1084 - Rackmount EQ\/Mic Pre with Power Supply\u003c\/h2\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eBAE 1084\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis as authentic as you can get to the original, featuring the same St Ives (Carnhill) transformers as the vintage modules, Elma switches and Canford wire.\u003c\/p\u003e\n\u003cp\u003eThe BAE 1084 looks identical to the original vintage module and will happily retrofit in vintage Neve 80 Series consoles because the entire product is engineered in exactly the same way as the originals: the same chassis construction, connectors, printed circuit board layouts, hand-wired looms, and circuitry.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz and 16kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable 'High Q', selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 Band Equaliser\u003c\/strong\u003e\u003cbr\u003eHF:+\/-16dB fixed frequency shelving at 10kHz, 12kHz and 16kHz\u003cbr\u003eLF: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003eMF: +\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLow Pass Filter\u003c\/strong\u003e\u003cbr\u003e6kHz, 8kHz, 10kHz, 14kHz, \u0026amp; 18kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e10 LBS\/4.54 KG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches\u003c\/strong\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683359961462,"sku":"SBAE1084WPS","price":3120.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1084front.jpg?v=1764177547"},{"product_id":"bae-10dcf-single-channel-filter-compressor-with-internal-psu","title":"BAE 10DCF - Compressor\/Limiter","description":"\u003ch2\u003eBAE 10DCF - Single Channel Filter Compressor with Internal PSU\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 10DCF\u003c\/strong\u003e, which builds on the capabilities of the 10DC compressor\/limiter, features Carnhill and Jensen transformers, all discrete circuitry while adding a brand new, inductor-based bypass filter.\u003c\/p\u003e\n\u003cp\u003eThe 10DCF bypass filter delivers increased flexibility while recording low frequency ranged instruments, and engages at 50, 80, 160 and 300 Hz — perfect for users who want to compress a broad frequency range while leaving lower frequencies uncompressed. The 10DCF units are also stereo linkable, making them the perfect complement for the output stage of a mixer.\u003c\/p\u003e\n\u003cp\u003eThe 10DCF is an incredibly versatile tool for both tracking and mixing. It retains the same top grade, Class A circuitry that is present in BAE gear, while providing bypass filter options that make it more customizable, especially useful for drum and bass applications.\u003c\/p\u003e\n\u003cp\u003eAside from its unmistakably authentic sound quality, the 10DCF also features a useful range of features on its front panel, including Elma stepped switches for each control, BAE Audio's trademark Marconi knobs, and a gastank style analogue meter. The combination of these elements provides users with accurate visual and tactile reference points as they adjust and shape their sounds. The metering on the 10DCF incorporates a sleek and simple design, with easy to read white lettering set against a black background in a rugged gastank style encasement.\u003c\/p\u003e\n\u003cp\u003eThe 10DCF is hand assembled in California using only premium grade analogue components.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiscrete Class A transformer-coupled circuit throughout.\u003c\/li\u003e\n\u003cli\u003eFully independent Compressor and Limiter for separate audio dynamics control.\u003c\/li\u003e\n\u003cli\u003eIntuitive layout with illuminated meter showing gain reduction.\u003c\/li\u003e\n\u003cli\u003eHigh quality stepped Elma® switches for dialing accuracy and repeatability.\u003c\/li\u003e\n\u003cli\u003eTrue bypass even when the unit is off.\u003c\/li\u003e\n\u003cli\u003eInternal switch mode power supply that will self-adjust to 230-240v\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e5Hz to 45kHz -1dB Measured at +8dBu\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNoise\u003c\/b\u003e\u003cbr\u003e-80dBu with 200ohms source\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+33dBu into 10kΩ\u003cbr\u003e+27dBU into 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDistortion\u003c\/b\u003e\u003cbr\u003eVaries from 0.03% to greater than 1%\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCompressor\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e\u003cem\u003eThreshold:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e-20dBu to +16dBu with 2dB steps\u003cbr\u003e\u003cb\u003e\u003cem\u003eRatio:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e1.5:1 to 10:1 with 6 position switch\u003cbr\u003e\u003cb\u003e\u003cem\u003eAttack:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e2mS to 80mS with 6 position switch\u003cbr\u003e\u003cb\u003e\u003cem\u003eRecovery:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e100, 200, 400, 800mS\u003cbr\u003e\u003cb\u003eAuto 1\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e100mS isolated peaks, 2 Sec prolonged levels\u003cbr\u003e\u003cb\u003eAuto 2\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e50mS isolated peaks, 5 Sec prolonged levels\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLimiter\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e\u003cem\u003eThreshold\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e+4dBu to +15dBu with 0.5 dB steps\u003cbr\u003e\u003cb\u003e\u003cem\u003eAttack:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003eSlow 4mS, Fast 2mS\u003cbr\u003e\u003cb\u003e\u003cem\u003eRecovery:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e100, 200, 400, 800mS\u003cbr\u003e\u003cb\u003eAuto 1\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e100mS isolated peaks, 2 Sec prolonged levels\u003cbr\u003e\u003cb\u003eAuto 2\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e50mS isolated peaks, 5 Sec prolonged levels\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBypass Filter\u003c\/b\u003e\u003cbr\u003e50, 80,160 and 300 Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain Make-up:\u003c\/b\u003e\u003cbr\u003e0 to +20dBu in 1 dB steps\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e100Ω Balanced earth free\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Consumption\u003c\/b\u003e\u003cbr\u003e200mA at 24VDC\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions in Inches\u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683360387446,"sku":"SBAE10DCF","price":2165.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/10DCFfront.jpg?v=1765973680"},{"product_id":"bae-10dcf-pair-stereo-pair-filter-compressor-with-internal-psu","title":"BAE 10DCF PAIR - 2x 10DCF Compressor\/Limiter","description":"\u003ch2\u003eBAE 10DCF PAIR - Filter Compressor with Internal PSU (Stereo Pair)\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 10DCF\u003c\/strong\u003e, which builds on the capabilities of the 10DC compressor\/limiter, features Carnhill and Jensen transformers, all discrete circuitry while adding a brand new, inductor-based bypass filter.\u003c\/p\u003e\n\u003cp\u003eThe 10DCF bypass filter delivers increased flexibility while recording low frequency ranged instruments, and engages at 50, 80, 160 and 300 Hz — perfect for users who want to compress a broad frequency range while leaving lower frequencies uncompressed. The 10DCF units are also stereo linkable, making them the perfect complement for the output stage of a mixer.\u003c\/p\u003e\n\u003cp\u003eThe 10DCF is an incredibly versatile tool for both tracking and mixing. It retains the same top grade, Class A circuitry that is present in BAE gear, while providing bypass filter options that make it more customizable, especially useful for drum and bass applications.\u003c\/p\u003e\n\u003cp\u003eAside from its unmistakably authentic sound quality, the 10DCF also features a useful range of features on its front panel, including Elma stepped switches for each control, BAE Audio's trademark Marconi knobs, and a gastank style analogue meter. The combination of these elements provides users with accurate visual and tactile reference points as they adjust and shape their sounds. The metering on the 10DCF incorporates a sleek and simple design, with easy to read white lettering set against a black background in a rugged gastank style encasement.\u003c\/p\u003e\n\u003cp\u003eThe 10DCF is hand assembled in California using only premium grade analogue components.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDiscrete Class A transformer-coupled circuit throughout.\u003c\/li\u003e\n\u003cli\u003eFully independent Compressor and Limiter for separate audio dynamics control.\u003c\/li\u003e\n\u003cli\u003eIntuitive layout with illuminated meter showing gain reduction.\u003c\/li\u003e\n\u003cli\u003eHigh quality stepped Elma® switches for dialing accuracy and repeatability.\u003c\/li\u003e\n\u003cli\u003eTrue bypass even when the unit is off.\u003c\/li\u003e\n\u003cli\u003eInternal switch mode power supply that will self-adjust to 230-240v\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e5Hz to 45kHz -1dB Measured at +8dBu\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNoise\u003c\/b\u003e\u003cbr\u003e-80dBu with 200ohms source\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+33dBu into 10kΩ\u003cbr\u003e+27dBU into 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDistortion\u003c\/b\u003e\u003cbr\u003eVaries from 0.03% to greater than 1%\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCompressor\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e\u003cem\u003eThreshold:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e-20dBu to +16dBu with 2dB steps\u003cbr\u003e\u003cb\u003e\u003cem\u003eRatio:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e1.5:1 to 10:1 with 6 position switch\u003cbr\u003e\u003cb\u003e\u003cem\u003eAttack:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e2mS to 80mS with 6 position switch\u003cbr\u003e\u003cb\u003e\u003cem\u003eRecovery:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e100, 200, 400, 800mS\u003cbr\u003e\u003cb\u003eAuto 1\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e100mS isolated peaks, 2 Sec prolonged levels\u003cbr\u003e\u003cb\u003eAuto 2\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e50mS isolated peaks, 5 Sec prolonged levels\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLimiter\u003c\/b\u003e\u003cbr\u003e\u003cb\u003e\u003cem\u003eThreshold\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e+4dBu to +15dBu with 0.5 dB steps\u003cbr\u003e\u003cb\u003e\u003cem\u003eAttack:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003eSlow 4mS, Fast 2mS\u003cbr\u003e\u003cb\u003e\u003cem\u003eRecovery:\u003c\/em\u003e\u003c\/b\u003e\u003cbr\u003e100, 200, 400, 800mS\u003cbr\u003e\u003cb\u003eAuto 1\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e100mS isolated peaks, 2 Sec prolonged levels\u003cbr\u003e\u003cb\u003eAuto 2\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e50mS isolated peaks, 5 Sec prolonged levels\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eBypass Filter\u003c\/b\u003e\u003cbr\u003e50, 80,160 and 300 Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain Make-up:\u003c\/b\u003e\u003cbr\u003e0 to +20dBu in 1 dB steps\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e100Ω Balanced earth free\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Consumption\u003c\/b\u003e\u003cbr\u003e200mA at 24VDC\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions in Inches\u003c\/b\u003e\u003cbr\u003e19W x 1.75L x 9D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683360452982,"sku":"SBAE10DCFPAIR","price":3832.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/10DCFpair.jpg?v=1765973680"},{"product_id":"bae-2cr-2-channel-10-series-rack","title":"BAE 2CR - 2-Channel 10-Series Module Rack","description":"\u003ch2\u003eBAE 2CR - 2-Channel 10-Series Module Rack\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 2CR\u003c\/strong\u003e will house two 10 series modules like the 1073, 1084, 1066 etc... (Vintage modules or new).\u003c\/p\u003e\n\u003cp\u003eThe build quality of this rack makes it superior to any system on the market today. We use a solid steel internal chassis that are custom molded so that the module slides in easily without the need for guide rails.\u003c\/p\u003e\n\u003cp\u003eIt has a separate output knob and comes complete with 48v for phantom power.\u003c\/p\u003e\n\u003cp\u003eWhat also makes this rack unique is the Carnhill OEP direct inputs. We mount two Carnhill OEP line transformers so you can plug your bass or guitar directly into the unit.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e≅150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 34W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight (Empty)\u003c\/b\u003e\u003cbr\u003e20\/9.07 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (in Inches)\u003c\/b\u003e\u003cbr\u003e19W x 5L x 13.75D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683360846198,"sku":"SBAE2CR","price":1665.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/2CRfront.jpg?v=1765974368"},{"product_id":"bae-1023l-1023-module-for-500-series","title":"BAE 1023L - 500 Series Module EQ\/Mic Pre","description":"\u003ch2\u003eBAE 1023L - 500 Series Module EQ\/Mic Pre\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1023L\u003c\/strong\u003e — based on the classic 1023 — takes the preamp and EQ from the 1073 and expands upon it with significantly more frequency options in the high and mid sections, even allowing users to play the mid bell curve directly against the high and low shelves where they overlap.\u003c\/p\u003e\n\u003cp\u003eThe 1023L is completely handwired using Carnhill (St. Ives) transformers. It has the exact same mic\/line preamp as the 1073, but with significantly more frequencies in the mid and high sections.\u003c\/p\u003e\n\u003cp\u003eAside from simply offering more frequency settings to play with, these expanded EQ sections also allow you to play the mid bell curve directly against the high and low shelves where they overlap. This capability opens the tone shaping possibilities in very interesting and musical ways.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz.\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz, 150Hz \u0026amp; 300Hz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e3 Band Equaliser\u003cbr\u003e\u003cstrong\u003eHF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cstrong\u003eLF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cstrong\u003eMF:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e+\/-18dB +\/-12dB or +\/-18dB peaking with switchable selectable centre frequencies of 160Hz, 270Hz, 360Hz, 510Hz, 700Hz, 1.6kHz, 3.2kHz, 4.8kHz, 7.2kHz, 8.2kHz, 10kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e18dB per octave slope, switchable between 50Hz, 80Hz, 150Hz \u0026amp; 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e6 LBS\/2.72 KG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches\u003c\/strong\u003e\u003cbr\u003e45 mm W x 8.75 inches H x 10.5 inches\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683361567094,"sku":"SBAE5001023L","price":1995.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1023Lfront.jpg?v=1765974827"},{"product_id":"bae-1066dl-1066d-module-for-500-series","title":"BAE 1066DL - 500 Series Module EQ\/Mic Pre","description":"\u003ch2\u003eBAE 1066DL - 500 Series Module EQ\/Mic Pre\u003c\/h2\u003e\n\u003cp\u003eThe new \u003cstrong\u003eBAE 1066DL\u003c\/strong\u003e is based on the classic 1066, which features the same mic-line pre-amplification stage as the 1073, but features different frequency selections in its EQ for a whole new sonic palette. The available frequencies on the 1066 are especially well suited to guitar applications because of its unique midrange.\u003c\/p\u003e\n\u003cp\u003eThe 1066DL is completely hand-wired using Carnhill (St. Ives) transformers and has the same mic-line pre-amp as the 1073, with the exception that the 1066DL adds a few different frequencies to your pallet.\u003c\/p\u003e\n\u003cp\u003eThis unit is popular among guitarists for having a unique mid-range. The original 1066 only had a 10k shelving but this unit offers additional frequencies: 10k Hz,12k Hz,16k Hz, 20k Hz and 24k Hz.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB shelving with selectable frequencies of 10kHz, 12kHz, 16kHz, 20kHz and 24kHz.\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp;220Hz.\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 18dB per octave slope, switchable between 45Hz, 70Hz, 160Hz \u0026amp; 360Hz.\u003c\/li\u003e\n\u003cli\u003eEQ Button: Switches the equaliser on or off\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response\u003c\/b\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e3 Band Equaliser\u003c\/b\u003e\u003cbr\u003e\u003cb\u003eHF:\u003c\/b\u003e+\/-16dB fixed frequency shelving at 10kHz,12kHz, 16kHz, 20kHz and 24kHz\u003cbr\u003e\u003cb\u003eLF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003e\u003cb\u003eMF:\u003cspan\u003e \u003c\/span\u003e\u003c\/b\u003e+\/-16dB peaking with switchable selectable centre frequencies of 700Hz, 1.2kHz, 2.4kHz, 3kHz, 7kHz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eHigh Pass Filter\u003c\/b\u003e\u003cbr\u003e45Hz, 70Hz, 160Hz \u0026amp; 360Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMic Input Impedance\u003c\/b\u003e\u003cbr\u003e≈1200\/300 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eLine Input Impedance\u003c\/b\u003e\u003cbr\u003e10k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDI Input Impedance\u003c\/b\u003e\u003cbr\u003e≈150k ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eOutput Impedance\u003c\/b\u003e\u003cbr\u003e65 ohms\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCommon Mode Rejection Ratio\u003c\/b\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eMaximum Output Level\u003c\/b\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e115\/230 VAC, 28W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eGain dB\u003c\/b\u003e\u003cbr\u003e0 to 80 dB\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eEquivalent Input Noise\u003c\/b\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight\u003c\/b\u003e\u003cbr\u003e6 LBS \/ 2.72 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions in Inches\u003c\/b\u003e\u003cbr\u003e45 mm W x 8.75 inches H x 10.5 inches D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683361927542,"sku":"SBAE5001066DL","price":1665.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1066DLfront.jpg?v=1765975277"},{"product_id":"bae-1073d-mic-pre-di-and-eq-for-500-series-rack","title":"BAE 1073D - 500 Series Mic Pre, DI and EQ","description":"\u003ch2\u003eBAE 1073D - 500 Series Mic Pre, DI and EQ\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003e1073D (Deluxe)\u003c\/strong\u003e is essentially a 1073 module with extra high frequencies and a direct input for the 500 series market. Built using the same exact parts as the 10 series module, the 1073D features Carnhill transformers, Elma gold plated switches and Canford wire making this the best sounding Class A mic‐pre EQ module on the block.\u003c\/p\u003e\n\u003cp\u003eBecause BAE did not want to compromise, the parts are such that they made this a 3 space wide module for optimal quality in contrast to building a smaller rack space version lacking the same premium components.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh Frequency: +\/-16dB fixed frequency shelving at 10kHz, 12kHz and 16kHz\u003c\/li\u003e\n\u003cli\u003eLow Frequency: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003c\/li\u003e\n\u003cli\u003eMid Range: +\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/li\u003e\n\u003cli\u003eHigh Pass Filter: 50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/li\u003e\n\u003cli\u003ePhase Button: 180°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eFrequency Response\u003c\/strong\u003e\u003cbr\u003e10Hz to -3dB at 55kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3 Band Equaliser\u003c\/strong\u003e\u003cbr\u003eHF: +\/-16dB fixed frequency shelving at 10kHz, 12kHz and 16kHz\u003cbr\u003eLF: +\/-16dB shelving with selectable frequencies of 35Hz, 60Hz, 110Hz \u0026amp; 220Hz\u003cbr\u003eMF: +\/-18dB peaking, fixed 'Q' with, selectable centre frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz \u0026amp; 7.2kHz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHigh Pass Filter\u003c\/strong\u003e\u003cbr\u003e50Hz, 80Hz, 160Hz \u0026amp; 300Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMic Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈1200\/300Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLine Input Impedance\u003c\/strong\u003e\u003cbr\u003e10kΩ\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDI Input Impedance\u003c\/strong\u003e\u003cbr\u003e≈150kΩ\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOutput Impedance\u003c\/strong\u003e\u003cbr\u003e35Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Mode Rejection Ratio\u003c\/strong\u003e\u003cbr\u003e100dB min @ 60Hz\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMaximum Output Level\u003c\/strong\u003e\u003cbr\u003e+27.4 dBu @ 600Ω\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Requirements\u003c\/strong\u003e\u003cbr\u003e+\/- 16VDC - 120mA\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGain dB\u003c\/strong\u003e\u003cbr\u003e0 to 70 dB\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEquivalent Input Noise\u003c\/strong\u003e\u003cbr\u003e-110 dBu; Unweighted 300kHz Bandwidth\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWeight\u003c\/strong\u003e\u003cbr\u003e5 LBS\/2.72 KG\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions in Inches\u003c\/strong\u003e\u003cbr\u003e4.5W x 5.25H x 5.5D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683362287990,"sku":"SBAE5001073D","price":2216.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/1073Dfront.jpg?v=1764350258"},{"product_id":"bae-1073mpl","title":"BAE 1073MPL - 500 Series version of 1073MP","description":"\u003ch2\u003eBAE 1073MPL - 500 Series version of 1073MP\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBAE 1073MPL\u003c\/strong\u003e is the 500 Series version of the 1073MP (a mic pre-amp version of the 1073 equaliser), having the same well-known characteristic Class A sound with its harmonically rich low end, slight resonant highs, and maintained focused mids.\u003c\/p\u003e\n\u003cp\u003eTwo selectable impedances makes the 1073MPL work well with a variety of microphones.\u003c\/p\u003e\n\u003cp\u003eAs a coloured and versatile mic-pre, the 1073MPL maintains its sonic signature across a wide bandwidth.\u003c\/p\u003e\n\u003ch2\u003eBAE 1073MPL Key Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAll Class A, transformer-coupled design in a 500 series module.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOriginal Marconi knobs.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput impedance selector switch between 1200 and 300 ohms.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine-level capability for extra versatility as a line preamp.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh impedance DI for guitar and synth.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame Carnhill St Ives transformers as the 1073 and 1084.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSame modular design and hand-wiring BAE is known for.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBAE 1073MPL Specifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response: \u003c\/strong\u003e10Hz to -3dB at 55kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine Input Impedance: \u003c\/strong\u003e10k ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Impedance: \u003c\/strong\u003e65 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Mode Rejection Ratio: \u003c\/strong\u003e100dB min @ 60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level: \u003c\/strong\u003e+27.4 dBu @ 600Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain dB; \u003c\/strong\u003e0 to 71 dB\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683362648438,"sku":"SBAE5001073MPL","price":908.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/BAE_0001_1073MPL-Front.jpg?v=1763477779"},{"product_id":"bae-500c-500-series-fet-compressor","title":"BAE 500C - 500 Series FET Compressor","description":"\u003ch2\u003eBAE 500C - 500 Series FET Compressor\u003c\/h2\u003e\n\u003cp\u003eBased on the design of studio staple FET compressors of the ’60s and ’70s heard on countless hit records, the \u003cstrong\u003eBAE 500C\u003c\/strong\u003e features controls for input and output gain, plus the four selectable, time-honored compression rations of 4:1, 8:1, 12:1, and 20:1.\u003c\/p\u003e\n\u003cp\u003eIn addition to taming peaks, its premium components and classic circuit design add highly desireable analog warmth to your signal, making it an all-star for everything from drums to bass to vocals. Like all BAE Audio gear, the 500C is hand-wired in California to ensure the highest possible quality control.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFET gain reduction\u003c\/li\u003e\n\u003cli\u003eThree 2520 style opamps\u003c\/li\u003e\n\u003cli\u003eTransformer coupled output\u003c\/li\u003e\n\u003cli\u003eFeedback style peak limiter\u003c\/li\u003e\n\u003cli\u003eSC HPF\u003c\/li\u003e\n\u003cli\u003eHard bypass\u003c\/li\u003e\n\u003cli\u003eGain Reduction on\/off\u003c\/li\u003e\n\u003cli\u003eComp ratios: 2:1, 4:1, 8:1, 12:1, 20:1, ABI\u003c\/li\u003e\n\u003cli\u003eABI All Buttons In\u003c\/li\u003e\n\u003cli\u003eFully enclosed\u003c\/li\u003e\n\u003cli\u003eHigh quality components throughout\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003eMax Input Before Clip:\u003c\/b\u003e\u003cbr\u003e+27dBu\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNoise:\u003c\/b\u003e\u003cbr\u003e-82dB (+4dBu input, 1KHz, A-weighted, GR off)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eTHD+N:\u003c\/b\u003e\u003cbr\u003e0.15% (+4dBu input, 1KHz, A-weighted, GR off)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eFrequency Response:\u003c\/b\u003e\u003cbr\u003e+0.3dB \/ -0dB (10-22KHz)\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eSC HPF:\u003c\/b\u003e\u003cbr\u003e6dB\/octave @ 125Hz\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCurrent Draw:\u003c\/b\u003e\u003cbr\u003eApprox 120mA\/Rail\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683363402102,"sku":"SBAE500500C","price":958.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/500Cfront.jpg?v=1765975723"},{"product_id":"bae-73eql","title":"BAE 73EQL - 500 Series 1073 EQ","description":"\u003ch2\u003eBAE 73EQL - 500 Series 1073 EQ\u003c\/h2\u003e\n\u003cp\u003e“The \u003cstrong\u003e73EQL\u003c\/strong\u003e shares the same pedigree and workmanship of our classic 1073 lineup,” explained Mark Loughman, President of BAE Audio. “Achieving an authentic 1073 sound inside the 500 series format was a significant milestone for our company five years ago, and today we’ve managed to extend this capability into what we feel is the best sounding 500 series EQ on the market. With its extended control over all three frequency bands, the 73EQL delivers world class vintage BAE sound in a compact form factor.”\u003c\/p\u003e\n\u003cp\u003eThe highly anticipated 73EQL follows the success of the 1073MPL 500 series preamplifier, which was introduced four years ago and which was quickly adopted as a foundational element for many commercial and project studios around the globe. BAE Audio has been building the 1073 for two decades; consecutively longer than any other company in history. The company’s 500 series rendition of this classic circuitry is the result of many years of research and development, over which time the company strived to retain the authentic sound character of the 1073 in an impossibly small package — without compromising quality, materials or workmanship.\u003c\/p\u003e\n\u003ch2\u003eBAE 73EQL Features:\u003c\/h2\u003e\n\u003cp\u003eThe 73EQL delivers impressive tonal shaping options into a diminutive size, making it the ultimate accompaniment to a BAE 1073MPL 500 series preamplifier or as a stand-alone EQ to complement just any other input source. With a 3-band EQ section and highpass filter controls, the 73EQL can shape nuances of sound sources while imparting the classic sound character of the 1073 — this makes it the ultimate companion for on-location, studio recording, mixing or mastering applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExtended high frequencies of 8 kHz, 10 kHz, 12 kHz, 16 kHz and 20kHz\u003c\/li\u003e\n\u003cli\u003eExtended mid-range of 270 Hz, 360 Hz, 500 Hz, 700 Hz, 1.1 kHz, 1.6 kHz, 2.3 kHz, 3.2 kHz,4.8 kHz, 7.2 kHz, 10 kHz\u003c\/li\u003e\n\u003cli\u003eExtended low frequency range of 20 Hz, 35 Hz, 60 Hz, 110 Hz and 220 Hz\u003c\/li\u003e\n\u003cli\u003eExtended highpass filter of 25 Hz, 45 Hz, 70 Hz, 160 Hz and 360 Hz\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683363762550,"sku":"SBAE50073EQL","price":915.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/0001_bae-eql-front.jpg?v=1763480169"},{"product_id":"bae-b15-500-series-3-band-eq","title":"BAE B15 - 500 Series 3 Band EQ","description":"\u003ch2\u003eBAE B15 - 500 Series 3-Band EQ\u003c\/h2\u003e\n\u003ch3\u003eBAE B15 Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eStandard 500 series modular size 1.5\" x 5.25\"\u003c\/li\u003e\n\u003cli\u003e3-bands with 5 selectable frequencies per band\u003c\/li\u003e\n\u003cli\u003e+16 dB of boost and cut using continuous variable potentiometer\u003c\/li\u003e\n\u003cli\u003ePush button shelving option for low and high frequencies\u003c\/li\u003e\n\u003cli\u003eAll discrete design\u003c\/li\u003e\n\u003cli\u003eHigh headroom\u003c\/li\u003e\n\u003cli\u003eLow noise\u003c\/li\u003e\n\u003cli\u003eJensen Transformer balanced input \u0026amp; output\u003c\/li\u003e\n\u003cli\u003eCustom machined aluminium knobs\u003c\/li\u003e\n\u003cli\u003eElma Gold plated rotary switches and 15-way connector for longer life\u003c\/li\u003e\n\u003cli\u003eUtilizes Avedis® 1122 Opamps\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683364090230,"sku":"SBAE500B15","price":958.33,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/B15front.jpg?v=1765976082"},{"product_id":"bae-8chrwps-8cr-8-channel-rack-w-power-supply-48v","title":"BAE 8CR - 8-Channel Rack for 10-Series Modules","description":"\u003ch2\u003eBAE 8CR - 8-Channel Rack for 10-Series Modules\u003c\/h2\u003e\n\u003cp\u003eThis is an 8-module self-powered rack for vintage Neve 10-series 8 3\/4\" high modules including the 1066, 1073, 1084 and our reproduction 1073 and 1084 modules.\u003c\/p\u003e\n\u003cp\u003eEach module has its own separate output level control and lighted 48v phantom power switch. The back panel has XLR connectors for mic input, line input and output. The oversize external power supply puts out two times the current necessary to power the rack. It has an extra DC outlet which will operate any of our 1272 preamps or Class A Mixers.\u003c\/p\u003e\n\u003cp\u003eThe power supply may be set for 220\/240 volt operation for Europe or Australia at no extra charge. As well we can set it for 100 volt operation for Japan at no extra charge.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e8CR Channel Rack w\/power supply 48v MAP\u003c\/b\u003e\u003cbr\u003e\u003ci\u003e*Modules not included\u003c\/i\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e115\/230 VAC, 39W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight (Empty)\u003c\/b\u003e\u003cbr\u003e12 LBS \/ 5.44 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (in Inches)\u003c\/b\u003e\u003cbr\u003e19W x 8.75L x 16D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683364450678,"sku":"SBAE8CHRWPS","price":2162.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/8CRfront.jpg?v=1765976871"},{"product_id":"bae-8cm-with-psu","title":"BAE 8CM - 8-Channel Mixer for 10-Series Modules","description":"\u003ch2\u003eBAE 8CM - 8-Channel Mixer for 10-Series Modules\u003c\/h2\u003e\n\u003cp\u003eThe\u003cstrong\u003e BAE 8CM\u003c\/strong\u003e is an 8 channel mixer that can house the 10 series modules such as the 1073, 1084, 1023 and 1004.\u003c\/p\u003e\n\u003cp\u003eBoth mic and line inputs of each module can be mixed to either left or right channels with individual pan controls and output level. A stereo output is also provided for attenuating all channels.\u003c\/p\u003e\n\u003cp\u003eBussing amplifiers are the same Class A amplifiers used in our 1272's to retain that signature sound.\u003c\/p\u003e\n\u003cp\u003eThe 8CM can also be used as a 10 series rack with 8 direct outs.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003e8CM 8 Channel mixer w\/power supply 48v MAP\u003c\/b\u003e\u003cbr\u003e\u003ci\u003e*Modules not included\u003c\/i\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cp\u003e\u003cb\u003ePower Requirements\u003c\/b\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e115\/230 VAC, 42W\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eWeight (Empty)\u003c\/b\u003e\u003cbr\u003e15 LBS \/ 6.80 KG\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eDimensions (in Inches)\u003c\/b\u003e\u003cbr\u003e19W x 8.75L x 16D\u003c\/p\u003e","brand":"BAE","offers":[{"title":"Default Title","offer_id":56683364680054,"sku":"SBAE8CM","price":3000.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0256\/2988\/4462\/files\/8CMfront.jpg?v=1765976461"}],"url":"https:\/\/studiocare.com\/collections\/bae.oembed","provider":"Studiocare","version":"1.0","type":"link"}