Raspberry Pi Kernel 6.12.47+rpt-rpi-v8, An Energy Star Ally
Copyright (C) 2012-2024, Raspberry Pi Foundation & Broadcom.
Raspberry Pi 4 Model B Rev 1.4 Kernel Version 6.12.47+rpt-rpi-v8
Broadcom(R) BCM2711 Cortex-A72 (4) 1800 MHz
Memory Test :
Award Plug and Play BIOS Extension v1.0A
Initialize Plug and Play Cards...
PNP init Completed
Detecting Primary Master .....: Boot EEPROM
Detecting Primary Slave ......: SanDisk SD
Detecting Secondary Master ...: Skip
Detecting Secondary Slave ....: None
-
Press
DEL
to enter SETUP, Alt+F2 to enter EZ flash
utility
-
12/05/2023-04/BCM2711/RPI4B-UEFI-1.9.0
PCI device listing.....
Verifying DMI Pool Data ......
Starting Raspberry Pi OS.....
Raspberry Pi 4 Model B Rev 1.4
Uptime: 0 hours
Process Count: 0
RX/TX: 0MB/0MB
[GPIO] [PoE] ___________________
_____________________________________________________________│\ \
|\ --║-║-║-║-║-║-║-║-║-║-║-║-║-║-║-║-║-║-║-║-- │ \ [ETHERNET] \
\\ \ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ ║ \ --║-║-- │ \__________________\
\\ \¯¯¯¯¯¯¯¯\¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯ \ ║ ║ \ \ │ ______________|_
\\ \ [WIFI] \ ______________ _________ ------- \ │ │\ \
\\ │\\ \ \ \ \ \ ______ \│___│ \ [USB 3.0] \
\\ │ \\‗‗‗‗‗‗‗\ \ [CPU] \ \ [RAM] \ \ \ │ \_______________\
_\\ \ \\ \ \ \ \ \ ‗‗‗‗\ \ │ ______________|_
\\ \\ \ \\ \ ‗‗‗‗‗‗‗‗‗‗‗‗\ \ ‗‗‗‗‗‗‗\ _ ______ \ ││\ \
[MICRO SD CARD] \\ \\ \ ║ [DSI DP] │\\ \ \ \││ \ [USB 2.0] \
\\‗\\ \║\ │ \\ \ ‗‗‗‗\ │ \_______________\
\\ \ \\ │\¯¯¯¯¯¯\ \ │ <====| │
\\ __________ _______ _______ \ \\ │ \ \ \ │ <====| │
\\ │\ \ │\ \ │\ \ \ ║ \ \ ___ \ \│_______________│
\\_____\\ ‗‗‗‗‗‗‗‗\___\\ ‗‗‗‗‗\___\\ ‗‗‗‗‗\_\║\__\ │/ \│___________________\
└──────\│‗‗‗‗‗‗‗‗│────\\‗‗‗‗‗/────\\‗‗‗‗‗/───────\│\___/│───────────────────┘
¯¯¯¯¯¯¯
[USB-C] [MICRO HDMI] [AUDIO]
[CSI CAMERA]
CPU.......: Broadcom BCM2711,
Cortex-A72 (aarch64) SoC @ 1800 MHz
RAM.......:
4GB LPDDR4-3200 SDRAM
Storage...:
32GB Micro SD Card
WIFI......: 2.4 GHz and 5.0 GHz
IEEE 802.11ac wireless, Bluetooth 5.0, BLE
Power.....: 5V DC via USB-C
connector (minimum 3A*)
PoE.......: Power over Ethernet
(PoE) enabled (requires separate PoE HAT)
OS........: Linux 13 Debian GNU/Linux