You can check which version your mobile device is running by tapping on the hamburger menu and selecting Updates.
Version 1.5.6+13
Release date: March 24, 2026
- POOL-3231 Addresses an issue where enabling default Chemistry procedures for one type of chemical could disable the “Resume Method” of others inadvertently
Version 1.5.6+12
Release date: March 12, 2026
- POOL-3218 Addresses an issue where previously created HVAC/heating schedules’ Heating or Cooling modes could not be edited.
Version 1.5.6+8
Release date: February 20, 2026
- Fixes an app crash that could happen if saving a configuration with the Attendant controller offline.
Version 1.5.6+5
Release date: February 17, 2026
- POOL-3159 Improved the messages and usability on many screens
- POOL-3179 Improved system software performance and stability
- Updated the appearance of the temperature control submenu (meatball menu) – sliders have been changed to plus/minus buttons, and help text has been added where missing.
- Added “Connecting and Troubleshooting” information/links to several devices that were missing them:
- Chlorine sensors
- Autofill devices
- Water level sensors
- Flow meters
- Lights (PAL and Jandy Light Drivers)
- Pressure sensors
- Remotes
- Buttons
- Blowers
- Chemical pumps
- Fire devices
- Generic on/off devices
- Pool covers
- Reorganized the Freeze Protect edit screen in Installer Mode, including better naming of options.
- Added supplemental troubleshooting messaging (and links to the KB) to several screens and popups that are displayed during certain situations.
- When no internet connection is detected
- When controls or a body of water is Winterized
- When Freeze Protection is actively running
- When a user doesn’t have enough permission to turn on/off a control or change the settings.
- Updated messaging and terms for functionality like Autofill, Water Leveling, and Flow Detection
- Added the appropriate message popup when attempting to access the Color Palette or Sync Lights to Music menus when the site configuration does not support it
Version 1.5.5+8
Release date: January 29, 2026
- POOL-3144 Added support to configure new RS485 and 4-20mA Poolside Pressure Sensors.
- POOL-2911 Added the ability to configure relay-controlled 3-Way Actuators using only one relay or heater port. Requires Controller version 2.4.1 or later.
- POOL-3001 Added the ability to select and configure the Gain Mode to Chlorine Sensors.
- POOL-3094 The scheduler has been updater to support basic “On” scheduled events. This can be enabled by checking “Only Turn On” in the “More” screen of any individual schedule item.
- POOL-3139 Updated the Dissolved Oxygen Saturation Graph default Y axis range sop that higher reported values will appear correctly.
- POOL-2380 Addressed a visual bug where a previously selected site could remain under the list of Sites when selecting a second site from a maintainer’s client list without deselecting the first one.
- POOL-2418 Made improvements to the Site Transfer process to help clarify the steps needed and prevent an erroreous popup indicating accepting a transfer failed.
- POOL-2706 The scheduler now shows the count of how many currently configured schedules are programmed for Themes
- POOL-3163 Addressed an issue where newly created alerts would not be automatically added to a device when viewing devices in either Device Status or Installer Mode. Previously, you would need to exit the screen and go back to see new alerts.
- POOL-3172 Addressed an issue where an unknown alert and it’s details would not be displayed in the Alerts tab or the Alerts and History screen.
Version 1.5.4+7
Release date: January 20, 2026
- Addresses an issue with the configuration for pumps and how the setting for Dry Run Protection was being saved.
Version 1.5.4+6
Release date: January 13, 2026
- POOL-3156 Addresses an issue where the same control port could be selected for certain multi-port devices like heat pumps.
Version 1.5.4+4
Release date: January 12, 2026
- POOL-3017 Added Power Port support for Lights and Light Drivers. Requires controller version 2.3.11 or later.
- POOL-3017 Added the ability for multiple devices to share Power Ports.
- POOL-3082 Added configuration support for pump Dry Run Protection. Requires controller version 2.3.19 or later.
- POOL-3030 Added configuration support for Flow Meters to act as flow switches. Requires controller version 2.3.16 or later.
- POOL-3130 Added support for a new controller message that reports when a device is repeating reporting many alerts/errors. Requires controller version 2.3.21 or later.
- POOL-3133 Added a new “Installer Mode” body of water status that will be shown when the controller is in Installer Mode. Requires controller version 2.3.21 or later.
- POOL-3143 Addressed a problem with show the date for events in Alerts and History when the date was in 2025.
Older Releases
If you would like to take a look at our release notes for older, archived versions, follow this link.