Neumann.Control enables you to Setup, Align and Operate your Neumann DSP system. It contains a demo mode so you can explore the app even if you do not own Neumann DSP monitors yet. Via standard IP networking,...
Neumann.Control enables you to Setup, Align and Operate your Neumann DSP system. It contains a demo mode so you can explore the app even if you do not own Neumann DSP monitors yet. Via standard IP networking, Neumann.Control gives full access to all the functions of the KH 80 DSP Studio Monitor and KH 750 DSP Subwoofer not already available via the back panel. You can setup a system consisting of 1 to 9 loudspeakers and align it for a good in-room sound, and then operate it centrally. The key features of Neumann.Control are: Setup: . 1, 2, 4, 5, 7 and 9 KH 80 DSP, KH 120, KH 310, KH 420 loudspeakers . 1 KH 750 DSP Subwoofer . Identify loudspeakers on the network that are in the room . Assign the identified loudspeakers to positions in the room Align: . Guided Alignment - a set of simple questions resulting a well-balanced sound. The Guided Alignment is a process where you are asked very simple questions about the room and the loudspeaker position, and then the app adjusts the response of each loudspeaker accordingly . Manual Alignment - an 8-band fully parametric equalizer for expert users. In Manual Alignment expert users have complete freedom to adjust an 8-band parametric equalizer, levels and delays in each loudspeaker as they wish. Manual Alignment can also be used to edit Guided Alignments in a more detailed way. Operate: . System and alignment selection . Volume control, preset levels, dim, mute all . Groups, solos, mutes . Other system settings such as delay, standby level and logo brightness
Version History Fixes network connection problems with iOS 13 3.3 11/12/2019 - iOS 13 / iPadOS compatibility - Copy / paste equalizer settings between devices 3.2 11/05/2019 - Improved graphics - Feedback can now be sent more easily via the "About-Screen" - Fix: Delays set in Manual Alignment were not necessarily applied in the "Operate Screen" - Fix: Room volume did not update during Guided Alignment when width/height/length of a room were entered 3.1 09/13/2019 Improvements: - Support for analog loudspeakers KH 120, KH 310, KH 420 - Improved Guided Alignment - Improved delay calculation - Improved performance in demo mode - Firmware version of speakers is shown in network selection Fixes: - KH80 DSP with old firmware version could not be identified or selected during system setup - Occasional increase in loudness when restarting from standby - Additional stability improvements and minor fixes 3.0 08/02/2019 - Support for KH 750 DSP subwoofer - Manual Alignment: A filter’s parameters settings can be copied to another filter using a long click on the filter number - More reliable communication with loudspeakers - Various user interface improvements and bug fixes 2.0 03/15/2019 1.3 10/17/2018
Previous Versions
Here you can find the changelog of Neumann.Control since it was posted on our website on 2022-07-31 04:56:10.
The latest version is 3.3 and it was updated on 2026-06-23 14:11:08. See below the changes in each version.
Neumann.Control version 3.3
Updated At: 2026-06-02
Changes: Version History Fixes network connection problems with iOS 13 3.3 11/12/2019 - iOS 13 / iPadOS compatibility
- Copy / paste equalizer settings between devices 3.2 11/05/2019 - Improved graphics
- Feedback can now be sent more easily via the "About-Screen"
- Fix: Delays set in Manual Alignment were not necessarily applied in the "Operate Screen"
- Fix: Room volume did not update during Guided Alignment when width/height/length of a room were entered 3.1 09/13/2019 Improvements:
- Support for analog loudspeakers
KH 120, KH 310, KH 420
- Improved Guided Alignment
- Improved delay calculation
- Improved performance in demo mode
- Firmware version of speakers is shown in network selection
Fixes:
- KH80 DSP with old firmware version could not be identified or selected during system setup
- Occasional increase in loudness when restarting from standby
- Additional stability improvements and minor fixes 3.0 08/02/2019 - Support for KH 750 DSP subwoofer
- Manual Alignment: A filter’s parameters settings can be copied to another filter using a long click on the filter number
- More reliable communication with loudspeakers
- Various user interface improvements and bug fixes 2.0 03/15/2019 1.3 10/17/2018
Neumann.Control version 3.3
Updated At: 2019-11-12
Changes: Nov 12, 2019 Version 3.3
Fixes network connection problems with iOS 13
Neumann.Control version 3.3
Updated At: 2019-11-12
Changes: Fixes network connection problems with iOS 13
Related Apps
Here you can find apps that are similar with Neumann.Control.
We do not host Neumann.Control on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Neumann.Control is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
