onsemi NCS32100 Inductive Position Sensor is a full-featured controller and sensor interface for high-resolution and high-accuracy angular sensing when paired with a printed circuit board sensor. This sensor supports a 2.5MHz UART interface for connection to a half-duplex RS-485 driver and battery backup for multi-turn count tracking. The NCS32100 sensor supports flexible configuration to connect various inductive sensor patterns and offers a variety of digital output formats. This sensor provides velocity, temperature, and battery backup measurements. The NCS32100 houses power supply circuitry to support a wide VCC range and battery backup capability. This inductive position sensor is ideally used in industrial automation, angular position and velocity sensing, robotics, and servo control applications.
Introducing the NCS32100, an innovative dual-inductor rotary position sensor that convincingly offers high rotation speeds and high accuracy. The NCS32100 uses a new patented method for inductive position sensing, making it ideal for applications where fast-moving robots and industrial robots are deployed.
While the characteristics of inductive encoders make them very attractive for industrial applications, use cases have historically been limited to low speeds and applications that do not require high accuracy. ON Semiconductor has leveraged its 20+ years of expertise in designing inductive sensors to combine the proven advantages of inductive encoders with the high accuracy and high speeds typically found in mid-range and high-end optical encoders. This enables the NCS32100 (38mm sensor) to provide +/-50 arc seconds accuracy at 6,000 RPM. With some sacrifice in accuracy, the NCS32100 can support speeds up to 100,000RPM.
"The NCS32100 provides a simple 'plug and play' solution with firmware that directly outputs absolute position and velocity, pre-installed on its integrated microcontroller (MCU). The NCS32100's level of integration can significantly reduce design time and the number of external components required, accelerating time to market and enabling more compact and efficient designs," said Michel De Mey, vice president of ON Semiconductor's Industrial Solutions Division.
Several key features of inductive sensors make them ideal for industrial applications, where dust, oil, temperature and humidity have little effect on their accuracy. The NCS32100 device also features an integrated self-calibration routine to account for mechanical misalignment of the sensor. High configurability allows for a variety of printed circuit board (PCB) sensor designs, enabling original equipment manufacturers (OEMs) to configure and differentiate their solutions. The integrated MCU includes non-volatile flash memory (NVM) and a configurable interface to communicate with the host processor.
Onsemi now offers reference designs and evaluation boards to further accelerate the design process for industrial applications. The NCS32100 is available now. Please contact Onsemi's sales support and authorized distributors to purchase.
Manufacturer introduction: Onsemi
Onsemi(ONSEMI, NASDAQ: ON) is driving disruptive innovation to help build a better future. The company focuses on the automotive and industrial end markets and is accelerating the transformation of major trends, including automotive electronic functions and safety, sustainable power grids, industrial automation, and 5G and cloud infrastructure. ON Semiconductor provides a highly differentiated innovative product portfolio as well as intelligent power and intelligent sensing technologies to solve the world's most complex challenges and lead the creation of a safer, cleaner and smarter world. it is ranked among the Fortune 500 and is also included in the S&P 500 Index.
onsemi NCS32100 Inductive Position Sensor is a full-featured controller and sensor interface for high-resolution and high-accuracy angular sensing when paired with a printed circuit board sensor. This sensor supports a 2.5MHz UART interface for connection to a half-duplex RS-485 driver and battery backup for multi-turn count tracking. The NCS32100 sensor supports flexible configuration to connect various inductive sensor patterns and offers a variety of digital output formats. This sensor provides velocity, temperature, and battery backup measurements. The NCS32100 houses power supply circuitry to support a wide VCC range and battery backup capability. This inductive position sensor is ideally used in industrial automation, angular position and velocity sensing, robotics, and servo control applications.
Introducing the NCS32100, an innovative dual-inductor rotary position sensor that convincingly offers high rotation speeds and high accuracy. The NCS32100 uses a new patented method for inductive position sensing, making it ideal for applications where fast-moving robots and industrial robots are deployed.
While the characteristics of inductive encoders make them very attractive for industrial applications, use cases have historically been limited to low speeds and applications that do not require high accuracy. ON Semiconductor has leveraged its 20+ years of expertise in designing inductive sensors to combine the proven advantages of inductive encoders with the high accuracy and high speeds typically found in mid-range and high-end optical encoders. This enables the NCS32100 (38mm sensor) to provide +/-50 arc seconds accuracy at 6,000 RPM. With some sacrifice in accuracy, the NCS32100 can support speeds up to 100,000RPM.
"The NCS32100 provides a simple 'plug and play' solution with firmware that directly outputs absolute position and velocity, pre-installed on its integrated microcontroller (MCU). The NCS32100's level of integration can significantly reduce design time and the number of external components required, accelerating time to market and enabling more compact and efficient designs," said Michel De Mey, vice president of ON Semiconductor's Industrial Solutions Division.
Several key features of inductive sensors make them ideal for industrial applications, where dust, oil, temperature and humidity have little effect on their accuracy. The NCS32100 device also features an integrated self-calibration routine to account for mechanical misalignment of the sensor. High configurability allows for a variety of printed circuit board (PCB) sensor designs, enabling original equipment manufacturers (OEMs) to configure and differentiate their solutions. The integrated MCU includes non-volatile flash memory (NVM) and a configurable interface to communicate with the host processor.
Onsemi now offers reference designs and evaluation boards to further accelerate the design process for industrial applications. The NCS32100 is available now. Please contact Onsemi's sales support and authorized distributors to purchase.
Manufacturer introduction: Onsemi
Onsemi(ONSEMI, NASDAQ: ON) is driving disruptive innovation to help build a better future. The company focuses on the automotive and industrial end markets and is accelerating the transformation of major trends, including automotive electronic functions and safety, sustainable power grids, industrial automation, and 5G and cloud infrastructure. ON Semiconductor provides a highly differentiated innovative product portfolio as well as intelligent power and intelligent sensing technologies to solve the world's most complex challenges and lead the creation of a safer, cleaner and smarter world. it is ranked among the Fortune 500 and is also included in the S&P 500 Index.
Arabic
Français
Español
Português
Deutsch
Türkçe
Dutch
Italiano
Russian
Romaian
Portuguese (Brazil)
Greek