CCNP ENCOR Training is the required Core Training for CCNP 350-401 ENCOR v1.2, Enterprise Certification and CCIE Enterprise Infrastructure Certification. It is the second step after entering Cisco Networking with CCNA. CCNP Enterprise (Cisco Certified Network Professional) is the the most close certification path to old CCNP Routing and Switching. Beside many similar parts, there are also some additional updated CCNP ENCOR lessons related with Enterprise Networks. In this course, we will cover all the required updated lessons one by one.
In CCNP Training, you will learn required Architecture, Virtualization, Infrastructure, Network Assurance, Security and Automation for Enterprise Networks.
After completing updated CCNP 350-401 ENCOR v1.2 Training, you can pass 350-401 ENCOR v1.2 Exam! After this step, you should also finish a Specialist Training of CCNP Enterprise. If you also pass one of the Specialist Exam, you will be CCNP (Cisco Certified Network Professional)!
CCNP ENCOR 350-401 v1.2 Syllabus
What Will You Learn in CCNP ENCOR Training ? What are CCNP ENCOR lessons? We will cover all the lessons below in this training:
1. Architecture
- Enterprise Network Design Principles
- Campus Network Architecture
- Spine-and-Leaf Architecture
- Software-Defined Networking (SDN)
- Cisco Catalyst SD-WAN Fundamentals
- Cloud Connectivity Concepts
- Network Virtualization
- High Availability Concepts
2. Virtualization
- Virtual Machines (VMs)
- Containers and Containerization
- VRF-Lite
- Network Virtualization Technologies
- Data Plane and Control Plane Separation
3. Infrastructure
Layer 2 Technologies
- VLANs
- Trunking
- Spanning Tree Protocol (STP)
- Rapid STP (RSTP)
- Multiple STP (MST)
- EtherChannel
Layer 3 Technologies
- Static Routing
- OSPFv2 and OSPFv3
- EIGRP
- BGP Fundamentals
- Route Redistribution
- Policy-Based Routing (PBR)
Multicast
- PIM Sparse Mode
- PIM Dense Mode
- Source Specific Multicast (SSM)
- Bidirectional PIM
- MSDP Fundamentals
First Hop Redundancy
- HSRP
- VRRP
- GLBP
4. Network Assurance
- SNMP
- Syslog
- NetFlow
- Flexible NetFlow
- IP SLA
- SPAN and RSPAN
- Network Monitoring
- Troubleshooting Methodologies
5. Security
- AAA (Authentication, Authorization, Accounting)
- RADIUS
- TACACS+
- Access Control Lists (ACLs)
- Control Plane Policing (CoPP)
- Device Access Security
- Layer 2 Security Features
- VPN Concepts
- Wireless Security Fundamentals
6. Automation and Programmability
- JSON
- XML
- YAML
- Python Fundamentals
- REST APIs
- RESTCONF
- YANG Data Models
- Configuration Management Concepts
- Cisco Catalyst Center APIs
- Orchestration Concepts
- AI-Assisted Network Operations
To learn more about CCNP ENCOR v1.2, you can also visit Cisco Website. You can learn both CCNP (Cisco Certified Network Professional) and other certification paths here.
Full CCNP 350-401 v1.1 Course
To Pass 350-401 ENCOR Exam at the First Attempt and Not To Lose Time , You can start our CCNP Course! This Exam is the requirement exam for both CCNP (Cisco Certified Network Professional) and CCIE (Cisco Certified Internetwork Expert).
Below, you can find All the Lessons of CCNP 350-401 ENCOR Training. For CCNP Enterprise and CCIE Enterprise Infrastructure Certifications, you should learn all these lessons. Most of these CCNP lessons were also the lessons of previous CCNP Routing and Switching. Now, the new version of these certification is CCNP Enterprise.
After completing these CCNP Lessons, you will be ready for CCIE Enterprise Infrastructure Exam. There are also some additional configuration labs for CCIE but in this course, we will cover many of these Cisco labs. To be a network expert, this certification training and the lessons that we have covered are very important. So, to be a network profession or a network expert, Cisco CCNP is a good choice!
CCNP ENCOR FAQ
What is the latest version for CCNP ENCOR?
CCNP 350-401 ENCOR v1.2 is the lates version.
Are there any prerequisite for CCNP 350-401 ENCOR v1.2 Exam?
No. There is no prerequisite for this exam. After completing any CCNP course, if you are ready, you can schedule and take your exam.
Do I need to pass CCNA 200-301 v1.2 before CCNP 350-401 ENCOR v1.2 Exam?
No, you do not need to pass CCNA before CCNP anymore. Before years ago, you had to. But now, you can start with CCNP directly.
Why Should I Pass CCNP ENCOR Exam?
CCNP Enterprise certification is one of the most important Cisco network certifications. To have this certification, you should pass Cisco Core exam, CCNP 350-401 ENCOR v1.2. This is also a requirement before CCIE written Exam.
Does IPCisco CCNP Course cover all updated CCNP lessons v1.2?
Yes. We cover all the updated CCNP 350-401 ENCOR v1.2 lessons. We always update our content according to the certification exam updates.
What is the cost of Cisco CCNP ENCOR v1.2 Exam?
CCNP ENCOR certification cost is 400$.
How long does the CCNP exam take?
Exam takes 120 minutes (2 hours).
How many questions are there in CCNP 350-401 v1.2?
There are approximately 100 questions in the exam.
What is the passing score for CCNP exam?
The passing score is at least almost 825/100 (%82) points.
How long does CCNP exam take to study?
It takes 4-5 months with a good focus on the theorical lessons and practice on Cisco switches and routers. Beside, 2-3 years networking job experience can be good for this certification.
Where Can I Schedule for CCNP Exam?
You can schedule your exam on Cisco website.
What is Next After CCNP 350-401 ENCOR v1.2?
This exam is the core exam for both CCNP Enterprise and CCIE Enterprise Infrastructure Certifications. After taking CCNP ENCOR, you can continue with a CCNP Concentration exam like 300-410 ENARSI, 300-415 ENSDWI etc. to become CCNP Certified, or you can continue with CCIE CCIE Enterprise Infrastructure v1.0 lab exam to become CCIE Certified.
What are the CCNP Concentration Exams After CCNP ENCOR?
Optional CCNP Concentration Exams are 300-410 ENARSI, 300-415 ENSDWI, 300-420 ENSLD, 300-425 ENWLSD, 300-430 ENWLSI, 300-435 ENAUTO, 300-440 ENCC.
What is new at 2025 on CCNP ENCOR Exam?
All the updated lessons are same on 2025 CCNP 350-401 ENCOR v1.2 Exam.
Modules
IPv4
Lessons
IPv6
Lessons
ICMP and ARP
Lessons
Routing Fundamentals
Lessons
RIP
Lessons
EIGRP
Lessons
OSPF
Lessons
- OSPF Virtual-Link Configuration On Packet Tracer
- OSPF Passive Interface
- LSDB (Link State Database)
- OSPF Area Border Router (ABR) and ASBR
- OSPF Cost and Shortest Path First
- OSPF NSSA and Totally NSSA on Cisco Packet Tracer
- OSPF Stub Area and Totally-Stub Area on Cisco Packet Tracer
- OSPF External Routes on Cisco Packet Tracer
- Multi Area OSPF Configuration on Packet Tracer
- OSPFv3 Configuration Example on Cisco IOS
- OSPFv3 (Open Shortest Path First Version 3)
- Cisco Single Area OSPF Configuration
- Other OSPF Key Points
- OSPF Network Types Explained
- OSPF Area Types
- OSPF LSA Types
- OSPF Packet Types
- OSPF Adjacency Process
- OSPF(Open Shortest Path First) Overview
BGP
Lessons
- BGP Next Hop Self Command
- OSPF vs BGP
- BGP Multi Hop Command
- BGP Neighbor Update-Source
- Cisco eBGP Configuration on GNS3
- BGP Route Reflector
- Cisco BGP Route Reflector Configuration on GNS3
- BGP Path Attributes – MED
- BGP Path Attributes – Origin
- BGP Path Attributes – AS Path
- BGP Path Attributes – Local Preference
- BGP Path Attributes – Weight
- BGP Configuration Example on Packet Tracer
- BGP AD and BGP Path Attributes
- Internal BGP (iBGP) and External BGP (eBGP)
- BGP Peers, BGP Sessions, BGP Messages
- BGP (Border Gateway Protocol)
Layer 2 Technologies
Lessons
VPN Technologies
Lessons
DHCP and DNS
Lessons
EtherChannels
Lessons
NAT
Lessons
Access Lists
Lessons
Security
Lessons
SNMP
Lessons
Spanning Tree
Lessons
- PVST+ and Rapid PVST+Configuration on Packet Tracer
- PVST+ and Rapid PVST+
- MST Configuration on Cisco
- MST (Multiple Spanning Tree)
- STP Operation
- Spanning Tree Protocol (STP)
- Rapid Spanning Tree Protocol
- STP Portfast Configuration on Cisco Packet Tracer
- RSTP Configuration on Cisco Packet Tracer
- STP Configuration on Cisco Packet Tracer
VLANs
Lessons
- Switch Virtual Interface Configuration on Packet Tracer
- Switch Virtual Interfaces
- Inter VLAN Routing Configuration on GNS3
- Inter VLAN Routing Configuration Example
- VTP Configuration with Packet Tracer
- DTP and VLAN Frame Tagging Protocols
- Inter VLAN Routing with Router on Stick Topology
- VLANs (Virtual Local Area Networks)
- VLAN Port Assignment and VLAN Port Types
- VLAN Configuration on Cisco Packet Tracer
First Hop Redundancy
Lessons
QoS
Lessons
Port Monitor
Lessons
Path Virtualization
Lessons
Device Access Control
Lessons
Multicast Protocols
Lessons
Cisco SD-WAN
Lessons
Wireless Security
Lessons
Network Security Design
Lessons
IP Services
Lessons
Network Assurance
Lessons
- Cisco Syslog Server Configuration with GNS3
- Cisco RESTCONF Configuration
- Cisco NETCONF Configuration
- NETCONF Operation Steps
- NETCONF Protocol Stack
- NETCONF Overview
- RESTCONF
- Conditional debugging
- Cisco Terminal Monitor and Cisco Logging Monitor
- Cisco Debug Command
- Cisco IP SLA and Configuration
- Flexible Netflow Configuration
- Flexible Netflow
- Netflow and Netflow Configuration
Automation
Lessons
- Chef Overview
- Ansible vs Puppet vs Chef
- Ansible Overview
- Puppet Overview
- Data Serialization Languages: JSON, YAML, XML
- Network Automation Tools
- Cisco SD-Access Overview
- Traditional Network Management versus Cisco DNA Center
- Cisco DNA Center
- Cisco DNA and Intent-Based Networking (IBN)
- How Network Automation Impacts Network Management
- REST APIs Overview
Network Virtualization
Lessons
Wireless
Lessons
Other Lessons
Network Ports








