What happened?

my setup is WS2815 and esp32, using a SSR to cut power to the psu whenever the lights are off.
did some testing and manged to focus the issue onto the multirelay usermod

what happens is as follows -
id be playing music with Gravimeter effect, lights turn on and work fine by the rythm, then id turn off wled, it turns off, cut power to the psu just fine, issue starts when i turn it back on, if i turn on wled and im on the SR effect, the light will not turn on at all, and looking at the SSR, the led wont turn on so its not engaged, hence no 3.3 signal coming from wled.
i then switch to solid color effect, the lights will turn back on fine, i then switch back to gravimeter, it works fine.

the problem is only happening when i try to turn on wled straight into the SR effect.
i then turned off usermod multirelay and switched the relay into the main setting under led prefrences, it works fine this way, cuts off power to the psu but just not through multirelay mod.

before you ask why im not just using the main setting for relay - i need the time delay option available on usermod

To Reproduce Bug

explained above

Expected Behavior

to work just like the main option

Install Method

Self-Compiled

What version of WLED?

0.14

Which microcontroller/board are you seeing the problem on?

ESP32

Relevant log/trace output

No response

Anything else?

No response

Code of Conduct

• I agree to follow this project's Code of Conduct