chore(deps): update neopixel to v1.15.4 by renovate[bot] · Pull Request #9616 · meshtastic/firmware

renovate · 2026-02-12T10:51:14Z

This PR contains the following updates:

Package	Update	Change
NeoPixel	patch	`1.15.3` → `1.15.4`

Warning

Some dependencies could not be looked up. Check the Dependency Dashboard for more information.

Configuration

📅 Schedule: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR is behind base branch, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

If you want to rebase/retry this PR, check this box

This PR was generated by Mend Renovate. View the repository job log.

* Add support for Hackaday Communicator function keys (#9444) * Add portduino_status, assign hardware device IDs... (#9441) * Add portduino_status, assign hardware device IDs, and try to recover a CH341 device on a USB error * Minor fixes suggested by Copilot * BaseUI Message Bubble Improvements (#9452) * Improve Message bubbles for more distinct markers and improved layout * Tune message bubble size and corner markers * Finish message bubble tuning --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> * Add model workflows (#9462) * Add GitHub workflows for issue completeness, duplicate detection, onboarding, and contribution quality checks * Fix indentation * Refactor GitHub workflows for issue handling * Consolidate to two triage workflows * Update .github/workflows/models_pr_triage.yml Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update LovyanGFX to v1.2.19 (#9405) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * External Notification - handleReceived Rewrite (#9454) * First steps in consolidating code and minimizing rewrite * Continuing code cleanup * Merge containsBell and !isMuted to a single code path * Forgot about alert_message_buzzer in the cleanup * More code refinements and cleanup * Fix nagCycleCutoff * CoPilot Updates * Initial serialModule cleanup (#9465) * Initial serialModule cleanup * Move SERIAL_PRINT_PORT definition to variant.h * Add missed c6 check * Update src/modules/SerialModule.cpp Compile error for invalid SERIAL_PRINT_OBJECT value Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Support fully direct request/responses (#9455) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Move input init to an init function in InputBroker (#9463) * Move input init to an init function in iInputBroker * Unbreak targets with EXCLUDE_INPUTBROKER * Update src/input/InputBroker.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Fix conditional compilation for input broker * Apply suggestions from code review Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Trunk --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Just set LED_BUILTIN universally to -1, as we don't use it. (#8830) * Just set LED_BUILTIN universally to -1, as we don't use it. * LUD_BUILTIN workarounds * Squash the LED_BUILTINs that sneaked in * Don't kill valid pin derfine * Fix NimBLE deinit null check * Avoid short-circuit evaluation issues in Telemetry (#9467) * Make sensors in telemetry non-definitory Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * re-add unintentionally removed include * Undefine LED_BUILTIN where needed * Add a watchdog module to meshsolar. (#9337) * add watchdog module * Restore the code in power.h --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Trunk * PRs with needs-review still should get bot labeled * Update libch341-spi-userspace digest to af9bc27 (#9472) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix logic for rak12035 sensor default config and improve messaging (#9414) * better logic to check if the RAK12035 soil sensor is calibrated, better log messaging if either of the default values were used. * . * changes to how default calibration is done and a message it the default calibration is used pointing to the actual calibration sketch so the user can find it and use it to improve accuracy. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Add support for the hardware buttons on Bluetooth Nugget device (#9468) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * feat(stm32): Add Milesight GS301 Bathroom Odor Detector (#9359) - STM32WLE5CCU6 - NFC (unsupported): NXP NT3H2211W0FTTJ (NTAG I2C plus: NFC Forum T2T with I2C interface, password protection and energy harvesting) - Sensor (unsupported): Analog ADuCM355 (SHTC3 is connected to ADuCM355 and not directly accessible) - Bicolor LED - User button (presently not functional in STM32 variants) The definitions for sensor voltage control are present but commented out to save power, due to lack of sensor support. Powered by 4x 4000mAh RAMWAY ER18505 Li-SOCl2 batteries. Flashing: 1. Power down device (remove batteries) 2. Connect USB-UART to J1 (USART2), pinout is below, do not connect +3V3 pin yet 3. Short BOOT pins next to J1 4. Connect +3V3 pin or insert batteries while BOOT pins are shorted 5. Use STM32CubeProgrammer, connect by UART mode 6. Load firmware .hex and download J1 (USART2); Molex Picoblade (P=1.25mm * 4) 1. +3V3 2. PA3_USART2_RX_J1 3. PA2_USART2_TX_J1 4. GND Signed-off-by: Andrew Yong <me@ndoo.sg> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * enable long interleaving mode for LR11x0 and SX128x (#9399) Using long interleaving is not a breaking change, the receiver node is able to use the lora header to know if LI encoding is used or not and will decode LI packets correctly. However the problem is SX127x and other first generation LoRa IP which do not support LI at all, for theses it is a breaking change. HOWEVER due to the sync word bug the LR11x0 already can't talk with SX127x, so if we enable LI on theses no one would be able to tell. Same for SX128x altho this is because it works on 2.4Ghz which is incompatible with SX127x. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Add initial Nix shell (#8530) * Add initial Nix shell * Update flake.nix Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove stale variant.h defines (#9470) * Remove noop CANNED_MESSAGE_MODULE_ENABLE define * Remove over-eager warning removal * Remove unused LED_CONN * Dead defines removal * Rename oddball LED pin name * Rename second oddball LED pin name * Remove another dead define * More variant.h cleanup. LED_NOTIFICATION, remove dead code, etc (#9477) * Remove errant symbol * Add ledOff if not defined * Revert "Update libch341-spi-userspace digest to af9bc27 (#9472)" (#9483) This reverts commit b18742c2112309199150f39cb5a85a718290690e. * Add custom ringtone definition for RAK4631 and enable buzzer pin (#9481) * Update pschatzmann_arduino-audio-driver to v0.2.1 (#9398) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update meshtastic/device-ui digest to 63967a4 (#9475) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix issue triage workflow by clarifying device log requirements and improving JSON response handling * re-enable RTC support on THINKNODE M3 and M6 * Adjust pin poweroff for Thinknode M6 * You get an RTC, and you get an RTC! (delete HAS_RTC as it wasn't actually doing much) (#9493) * Change canned message recipient's previous page to send page (#9227) * Change canned message recipient's previous page to send page * Set previousPage for new menu pages Set nextPage in back MenuPages to previousPage Removed back MenuAction --------- Co-authored-by: zeropt <ferr0fluidmann@gmail.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> * Add on-screen keyboard to InkHUD (#9445) * Added keyboard option to menu. Shows a keyboard layout but does not type. * Keyboard types into text box and wraps. * send FreeText messages from the send submenu - renamed `KEYBOARD` action to `FREE_TEXT` and moved its menu location to the send submenu - opening the FreeText applet from the menu keeps the menu open and disabled the timeout - the FreeText applet writes to inkhud->freetext - the sending a canned message checks inkhud->freetext and if it isn't empty, sends and clears the inkhud->freetext * Text scrolls along with input * handle free text message completion as an event implements `handleFreeText` and `OnFreeText()` for system applets to interface with the FreeText Applet The FreeText Applet generates an `OnFreeText` event when completing a message which is handled by the first system applet with the `handleFreeText` flag set to true. The Menu Applet now handles this event. * call `onFreeText` whenever the FreeText Applet exits allows the menu to consistently restart its auto-close timeout * Add text cursor * Change UI to remove the header and make text box longer Keyboard displays captial letters for legibility Keyboard types captial letters with long press * center FreeText keys and draw symbolic buttons Move input field and keyboard drawing to their own functions: - `drawInputField()` - `drawKeyboard()` Store the keys in a 1-dimensional array Implement a matching array, `keyWidths`, to set key widths relative to the font size * Add character limit and counter * Fix softlock when hitting character limit * Move text box as its own menu page * rework FreeTextApplet into KeyboardApplet - The Keyboard Applet renders an on-screen keyboard at the lower portion of the screen. - Calling `inkhud->openKeyboard()` sends all the user applets to the background and resizes the first system applet with `handleFreeText` set to True to fit above the on-screen keyboard - `inkhud->closeKeyboard()` reverses this layout change * Fix input box rendering and add character limit to menu free text * remove FREE_TEXT menu page and use the FREE_TEXT menu action solely * force update when changing the free text message * reorganize KeyboardApplet - add comments after each row of `key[]` and `keyWidths[]` to preserve formatting - The selected key is now set using the key index directly - rowWidths are pre-calculated in the KeyboardApplet constructor - removed `drawKeyboard()` and implemented `drawKeyLabel()` * implement `Renderer::clearTile()` to clear the region below a tile * add parameter to forceUpdate() for re-rendering the full screen setting the `all` parameter to true in `inkhud->forceUpdate()` now causes the full screen buffer to clear an re-render. This is helpful for when sending applets to the background and the UI needs a clean canvas. System Applets can now set the `alwaysRender` flag true which causes it to re-render on every screen update. This is set to true in the Battery Icon Applet. * clean up tile clearing loops * implement dirty rendering to let applets draw over their previous render - `Applet::requestUpdate()` now has an optional flag to keep the old canvas - If honored, the renderer calls `render(true)` which runs `onDirtyRender()` instead of `onRender()` for said applet - The renderer will not call a dirty render if the full screen is getting re-rendered * simplify arithmetic in clearTile for better understanding * combine Applet::onRender() and Applet::onDirtyRender() into Applet::onRender(bool full) - add new `full` parameter to onRender() in every applet. This parameter can be ignored by most applets. - `Applet::requestUpdate()` has an optional flag that requests a full render by default * implement tile and partial rendering in KeyboardApplet * add comment for drawKeyLabel() * improve clarity of byte operations in clearTile() * remove typo and commented code * fix inaccurate comments * add null check to openKeyboard() and closeKeyboard() --------- Co-authored-by: zeropt <ferr0fluidmann@gmail.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> * Fix typo in LED state comment And removed unused define * Fix OTA filename determination to use unified format for ESP32 (#9488) * Refuse to send legacy DMs simply because the remote public key is unknown (#9485) * Refuse to send legacy DMs simply because the remote public key is unknown * Update src/mesh/Router.cpp - use more specific error Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/mesh/Router.cpp - more detail in warning message Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Don't ever define PIN_LED or BLE_LED_INVERTED (#9494) * Don't ever define PIN_LED * Deprecate BLE_LED_INVERTED * Add StatusMessage module and config overrides (#9351) * Add StatusMessage module and config overrides * Trunk * Don't reboot node simply for a StatusMessage config update * Missed in reviews - fixing send bubble (#9505) * Prefer EXT_PWR_DETECT pin over chargingVolt to detect power unplugged (#9511) * Power off control pin on Thinknode m5 during deepsleep and add RTC (#9510) * Power off control pin on Thinknode m5 during deepsleep * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Finish HAS_RTC cleanup * Add RTC for Thinknode M5 * Don't double-init Wire * Specify the RTC chip directly rather than use SensorRtcHelper. Saves a bit of flash, and avoid mis-detection --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Make sure we always return a value in NodeDB::restorePreferences() (#9516) In case FScom is not defined there is no return statement. This moves the return outside of the ifdef to make sure a defined value is returned. * Make sure we always return a value in NodeDB::restorePreferences() (#9516) In case FScom is not defined there is no return statement. This moves the return outside of the ifdef to make sure a defined value is returned. * Fix config.display.use_long_node_name not saving (#9522) * Inkhud battery icon improvements. (#9513) * Inkhud battery icon improvements. Fixes the battery icon draining from the flat side towards the bump, which is backwards from general design language seen on most devices By request of kr0n05_ on discord, adds the ability to mirror the battery icon which fixes that issue in another way, and is also a common design seen on other devices. * Remove option for icon mirroring * Add border + dither to battery to prevent font overlap * Fix trunk format * Code cleanup, courtesy of Xaositek. * Add reply bot module with DM-only responses and rate limiting (#9456) * Implement Meshtastic reply bot module with ping and status features Adds a reply bot module that listens for /ping, /hello, and /test commands received via direct messages or broadcasts on the primary channel. The module always replies via direct message to the sender only, reporting hop count, RSSI, and SNR. Per-sender cooldowns are enforced to reduce network spam, and the module can be excluded at build time via a compile flag. Updates include the new module source files and required build configuration changes. * Update ReplyBotModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/ReplyBotModule.h Match the existing MESHTASTIC_EXCLUDE_* guard pattern so the module is excluded by default. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/ReplyBotModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Tidying up --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * HotFix for ReplyBot - Modules.cpp included and moved configuration.h (#9532) * Implement UDP multicast handler start/stop to ensure proper lifecycle (#9524) * Implement UDP multicast handler start/stop to ensure proper lifecycle * Add close method to AsyncUDP and improve UDP multicast handler lifecycle management * Guard portduino * Undefine LED_BUILTIN (#9531) Keep variant in sync with https://github.com/meshtastic/firmware/commit/df40085 Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Add agc reset attempt (#8163) * Add agc reset attempt * Add radioLibInterface include * Trunk * AGC reset don't crash, don't naively call * Update src/main.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use Throttle function --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove unused hmx variable (#9529) The variable is not used at all in the function, remove it to silence the compiler warning. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Update Adafruit MPU6050 to v2.2.7 (#9525) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update NeoPixel to v1.15.3 (#9530) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update Adafruit MPU6050 to v2.2.8 (#9534) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update meshtastic-esp8266-oled-ssd1306 digest to 21e484f (#9533) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Rename LED_PIN to LED_POWER, move handling out of main to dedicated module (#9512) * Rename LED_PIN to LED_POWER, move handling out of main to dedicated module * Misc * Remove errant endif * Upgrade trunk (#9368) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Upgrade trunk (#9547) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Fix hop_limit upgrade detection (#9550) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * meshtasticd: Fix install on Fedora 43 (#9556) * Update meshtastic/device-ui digest to 6c75195 (#9553) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix hop_limit upgrade detection (#9550) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Update protobufs (#9559) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * RPM: Include meshtasticd-start.sh (#9561) * Added toggable config and default for larger screens to enable / hide bubbles on chat messages (#9560) * Added toggable config and default for largeer screens to enable / hide bubbles on chat messages * Refactor message bubble rendering logic for improved layout and consistency * Move osk_found initialization for trackball/encoder devices before module setup to fix missing keyboard for L1 * Utilize current checks for consistency * Reverted last changes --------- Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> * Add Slash Key to VirtualKeyboard (#9563) Addition of ? and / to the virtual Keyboard via short and long press * Add support for CW2015 LiPo battery fuel gauge (#9564) * Add support for CW2015 LiPo battery fuel gauge * Address Copilot's concerns, minor fixups * Make LED_POWER blip even in critical battery (#9545) * Feat/add sen5x (#7245) * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Add ScreenFonts.h Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> * PMSA003I 1st round test * Fix I2C scan speed * Fix minor issues and bring back I2C SPEED def * Remove PMSA003I library as its no longer needed * Remove unused I2C speed functions and cleanup * Cleanup of SEN5X specific code added from switching branches * Remove SCAN_I2C_CLOCK_SPEED block as its not needed * Remove associated functions for setting I2C speed * Unify build epoch to add flag in platformio-custom.py (#7917) * Unify build_epoch replacement logic in platformio-custom * Missed one * Fix build error in rak_wismesh_tap_v2 (#7905) In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices. * Put guards in place around debug heap operations (#7955) * Put guards in place around debug heap operations * Add macros to clean up code * Add pointer as well * Cleanup * Fix memory leak in NextHopRouter: always free packet copy when removing from pending * Formatting * Only queue 2 client notification * Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap * Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap * Update protobufs (#7973) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs * Trunk * Trunk * Static memory pool allocation (#7966) * Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev> * Portduino dynamic alloc * Missed * Drop the limit * Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix json report crashes on esp32 (#7978) * Tweak maximums * Fix DRAM overflow on old esp32 targets * Guard bad time warning logs using GPS_DEBUG (#7897) In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy. In combination, these result in a spamming of the logs when a bad time is found When the GPS is active, we're calling the GPS thread every 0.2secs. So this log could be printed 4,500 times in a no-lock scenario :) Reserve this experience for developers using GPS_DEBUG. Fixes https://github.com/meshtastic/firmware/issues/7896 * Scale probe buffer size based on current baud rate (#7975) * Scale probe buffer size based on current baud rate * Throttle bad time validation logging and fix time comparison logic * Remove comment * Missed the other instances * Copy pasta * Fix GPS gm_mktime memory leak (#7981) * Fix overflow of time value (#7984) * Fix overflow of time value * Revert "Fix overflow of time value" This reverts commit 084796920179e80a7500d36c25fd4d82b3ef4214. * That got boogered up * Remove PMSA003 include from modules * Add flag to exclude air quality module * Rework PMSA003I to align with new I2C scanner * Reworks AQ telemetry to match new dynamic allocation method * Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements * Reworks PMSA003I * Move add sensor template to separate file * Split telemetry on screen options * Add variable I2C clock compile flag * Added to Seeed Xiao S3 as demo * Fix drawFrame in AQ module * Module settings override to i2cScan module function * Move to CAN_RECLOCK_I2C per architecture * Add reclock function in TelemetrySensor.cpp * Add flag in ESP32 common * Minor fix * Move I2C reclock function to src/detect * Fix uninitMemberVar errors and compile issue * Make sleep, wakeUp functions generic * Fix STM32 builds * Add exclude AQ sensor to builds that have environmental sensor excludes * Add includes to AddI2CSensorTemplate.h * SEN5X first pass * WIP Sen5X functions * Further (non-working) progress in SEN5X * WIP Sen5X functions * Changes on SEN5X library - removing pm_env as well * Small cleanup of SEN5X sensors * Minor change for SEN5X detection * Remove dup code * Enable PM sensor before sending telemetry. This enables the PM sensor for a predefined period to allow for warmup. Once telemetry is sent, the sensor shuts down again. * Small cleanups in SEN5X sensor * Add dynamic measurement interval for SEN5X * Only disable SEN5X if enough time after reading. * Idle for SEN5X on communication error * Cleanup of logs and remove unnecessary delays * Small TODO * Settle on uint16_t for SEN5X PM data * Make AQTelemetry sensors non-exclusive * Implementation of cleaning in FS prefs and cleanup * Remove unnecessary LOGS * Add cleaning date storage in FS * Report non-cumulative PN * Bring back detection code for SEN5X after branch rebase * Add placeholder for admin message * Add VOC measurements and persistence (WIP) * Adds VOC measurements and state * Still not working on VOC Index persistence * Should it stay in continuous mode? * Add one-shot mode config flag to SEN5X * Add nan checks on sensor data from SEN5X * Working implementation on VOCState * Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h) * Adds conditions for stability and sensor state * Fixes on VOC state and mode swtiching * Adds a new RHT/Gas only mode, with 3600s stabilization time * Fixes the VOCState buffer mismatch * Fixes SEN50/54/55 model mistake * Adapt SEN5X to new sensor list structure. Improve reclock. * Improve reClockI2C conditions for different variants * Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery * Add SEN5X * Fix merge errors * Update library dependencies in platformio.ini * Fix unitialized variables in SEN5X constructor * Fix missing import * Cleanup of SEN5X class * Exclude AQ sensor from wio-e5 due to flash limitations * Fix I2C clock change logic * Fix trunk * Fix on condition in reclock * Add check on polling interval of sen5x --------- Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> Co-authored-by: Nashui-Yan <yannashui10@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix embedded null byte truncation in ATAK strings (#9570) * Enable FORTIFY and SP for native builds (#9537) * Enable FORITFY and NX for native builds meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. * Enable FORTIFY and NX for native builds meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. * Enable FORTIFY and SP for native builds meshtasticd does have a stack canaries and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and stack canaries. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * feat: Add SCD4X (#7198) * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Add ScreenFonts.h Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> * PMSA003I 1st round test * Fix I2C scan speed * Fix minor issues and bring back I2C SPEED def * Remove PMSA003I library as its no longer needed * Add functional SCD4X * Fix screen frame for CO2 * Add admin commands to SCD4X class * Add further admin commands and fixes. * Remove unused I2C speed functions and cleanup * Cleanup of SEN5X specific code added from switching branches * Remove SCAN_I2C_CLOCK_SPEED block as its not needed * Remove associated functions for setting I2C speed * Unify build epoch to add flag in platformio-custom.py (#7917) * Unify build_epoch replacement logic in platformio-custom * Missed one * Fix build error in rak_wismesh_tap_v2 (#7905) In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices. * Put guards in place around debug heap operations (#7955) * Put guards in place around debug heap operations * Add macros to clean up code * Add pointer as well * Cleanup * Fix memory leak in NextHopRouter: always free packet copy when removing from pending * Formatting * Only queue 2 client notification * Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap * Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap * Update protobufs (#7973) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs * Trunk * Trunk * Static memory pool allocation (#7966) * Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev> * Portduino dynamic alloc * Missed * Drop the limit * Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix json report crashes on esp32 (#7978) * Tweak maximums * Fix DRAM overflow on old esp32 targets * Guard bad time warning logs using GPS_DEBUG (#7897) In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy. In combination, these result in a spamming of the logs when a bad time is found When the GPS is active, we're calling the GPS thread every 0.2secs. So this log could be printed 4,500 times in a no-lock scenario :) Reserve this experience for developers using GPS_DEBUG. Fixes https://github.com/meshtastic/firmware/issues/7896 * Scale probe buffer size based on current baud rate (#7975) * Scale probe buffer size based on current baud rate * Throttle bad time validation logging and fix time comparison logic * Remove comment * Missed the other instances * Copy pasta * Fix GPS gm_mktime memory leak (#7981) * Fix overflow of time value (#7984) * Fix overflow of time value * Revert "Fix overflow of time value" This reverts commit 084796920179e80a7500d36c25fd4d82b3ef4214. * That got boogered up * Remove PMSA003 include from modules * Add flag to exclude air quality module * Rework PMSA003I to align with new I2C scanner * Reworks AQ telemetry to match new dynamic allocation method * Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements * Reworks PMSA003I * Move add sensor template to separate file * Split telemetry on screen options * Add variable I2C clock compile flag * Added to Seeed Xiao S3 as demo * Fix drawFrame in AQ module * Module settings override to i2cScan module function * Move to CAN_RECLOCK_I2C per architecture * Add reclock function in TelemetrySensor.cpp * Add flag in ESP32 common * Minor fix * Move I2C reclock function to src/detect * Fix uninitMemberVar errors and compile issue * Make sleep, wakeUp functions generic * Fix STM32 builds * Add exclude AQ sensor to builds that have environmental sensor excludes * Add includes to AddI2CSensorTemplate.h * SEN5X first pass * WIP Sen5X functions * Further (non-working) progress in SEN5X * WIP Sen5X functions * Changes on SEN5X library - removing pm_env as well * Small cleanup of SEN5X sensors * Minor change for SEN5X detection * Remove dup code * Enable PM sensor before sending telemetry. This enables the PM sensor for a predefined period to allow for warmup. Once telemetry is sent, the sensor shuts down again. * Small cleanups in SEN5X sensor * Add dynamic measurement interval for SEN5X * Only disable SEN5X if enough time after reading. * Idle for SEN5X on communication error * Cleanup of logs and remove unnecessary delays * Small TODO * Settle on uint16_t for SEN5X PM data * Make AQTelemetry sensors non-exclusive * Implementation of cleaning in FS prefs and cleanup * Remove unnecessary LOGS * Add cleaning date storage in FS * Report non-cumulative PN * Bring back detection code for SEN5X after branch rebase * Add placeholder for admin message * Add VOC measurements and persistence (WIP) * Adds VOC measurements and state * Still not working on VOC Index persistence * Should it stay in continuous mode? * Add one-shot mode config flag to SEN5X * Add nan checks on sensor data from SEN5X * Working implementation on VOCState * Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h) * Adds conditions for stability and sensor state * Fixes on VOC state and mode swtiching * Adds a new RHT/Gas only mode, with 3600s stabilization time * Fixes the VOCState buffer mismatch * Fixes SEN50/54/55 model mistake * Adapt SEN5X to new sensor list structure. Improve reclock. * Improve reClockI2C conditions for different variants * Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery * Add SEN5X * Fix merge errors * Small reordering in PMS class for consistency * If one sensor fails, AQ telemetry still reports data * Small formatting fix * Add SEN5X to AQI in ScanI2C * SCD4X now part of AQ module with template list * Fixes difference between idle and sleep * In LowPower, sleep is disabled * Requires testing for I2C clock comms for commands * Remove unnecessary import * Add co2 to serialized AQ metrics * Update library dependencies in platformio.ini * Fix unitialized variables in SEN5X constructor * Fix missing import * Fix uninitMemberVars * Fix import error for SCD4X * Fix I2CClock logic * Fix not reclocking back to 700000Hz * Fix multiple sensors being read simultaneously * The logic in AQ module is different to the one in EnvironmentTelemetryModule. In Env module, if any sensor fails to getMetrics, no valid flag for the module. This prevents other sensors to report data. * Fix pending clock change in PMSA003 * Cleanup of SEN5X class * Exclude AQ sensor from wio-e5 due to flash limitations * Fix I2C clock change logic * Make sure clock is always set to needed value * Fix returns * Fix trunk * Fix on condition in reclock * Fix trunk * Add check on polling interval of sen5x * Add missing serializer --------- Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> Co-authored-by: Nashui-Yan <yannashui10@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update gxepd2 to v1.6.7 (#9577) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Temporarily un-renovate libch341 (#9587) * Update protobufs (#9588) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add battery curve for T-Beam 1 watt (#9585) * Update built-in documentation for current method of implementation (#9592) * Refactor logging in ProtobufModule to ensure message details are logged after successful decoding (#9536) * Upgrade trunk (#9581) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Automated version bumps (#9604) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add missing openocd_target to custom nrf52 boards (#9603) This stops platformio complaining about `Missing target configuration for me25ls01-4y10td` etc when trying to flash with nrfutil. * Upgrade trunk (#9599) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Add sdl libs for native builds (#9595) * Add sdl libs for native builds * Alpine try again * Add missing openocd_target to custom nrf52 boards (#9603) This stops platformio complaining about `Missing target configuration for me25ls01-4y10td` etc when trying to flash with nrfutil. * Automated version bumps (#9604) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * fix some random compiler warnings (#9596) * fix some random compiler warnings (#9596) * Modify the dependency library of v4-tft (#9507) * Update protobufs (#9605) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Modify the dependency library of v4-tft (#9507) * BaseUI: Favorite Screen Signal Quality improvement (#9566) * Favorite Signal Quality improvement * Show Voltage if node shares it. * Trunk Fix * Change Favorite tittle to encase name with Asterisks * Add Pluggin In condition for Battery Line * Adjust getUptimeStr Prefixes * Create isAPIConnected for SharedCommon usage * Correct leftSideSpacing to account for isAPIConnected --------- Co-authored-by: Jason P <applewiz@mac.com> * ExternalNotification and StatusLED now call AmbientLighting to update… (#9554) * ExternalNotification and StatusLED now call AmbientLighting to update RGB LEDs. Add optional heartbeat * Don't overwrite RGB state if heartbeat is disabled. * Use the right define * Remove another .h and make rgb static * move rgb objects into AmbientLighting class * Straighten out AmbientLighting Thread object * Use %f for floats * Fixes on SCD4X admin comands (#9607) * Fixes on SCD4X admin comands * Minor fix in logs for SEN5X --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * feat/add sfa30 (#9372) * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Initial implementation for SFA30Sensor * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Add ScreenFonts.h Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> * PMSA003I 1st round test * Fix I2C scan speed * Fix minor issues and bring back I2C SPEED def * Remove PMSA003I library as its no longer needed * Add functional SCD4X * Fix screen frame for CO2 * Add admin commands to SCD4X class * Add further admin commands and fixes. * Remove unused I2C speed functions and cleanup * Cleanup of SEN5X specific code added from switching branches * Remove SCAN_I2C_CLOCK_SPEED block as its not needed * Remove associated functions for setting I2C speed * Unify build epoch to add flag in platformio-custom.py (#7917) * Unify build_epoch replacement logic in platformio-custom * Missed one * Fix build error in rak_wismesh_tap_v2 (#7905) In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices. * Put guards in place around debug heap operations (#7955) * Put guards in place around debug heap operations * Add macros to clean up code * Add pointer as well * Cleanup * Fix memory leak in NextHopRouter: always free packet copy when removing from pending * Formatting * Only queue 2 client notification * Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap * Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap * Update protobufs (#7973) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs * Trunk * Trunk * Static memory pool allocation (#7966) * Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev> * Portduino dynamic alloc * Missed * Drop the limit * Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix json report crashes on esp32 (#7978) * Tweak maximums * Fix DRAM overflow on old esp32 targets * Guard bad time warning logs using GPS_DEBUG (#7897) In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy. In combination, these result in a spamming of the logs when a bad time is found When the GPS is active, we're calling the GPS thread every 0.2secs. So this log could be printed 4,500 times in a no-lock scenario :) Reserve this experience for developers using GPS_DEBUG. Fixes https://github.com/meshtastic/firmware/issues/7896 * Scale probe buffer size based on current baud rate (#7975) * Scale probe buffer size based on current baud rate * Throttle bad time validation logging and fix time comparison logic * Remove comment * Missed the other instances * Copy pasta * Fix GPS gm_mktime memory leak (#7981) * Fix overflow of time value (#7984) * Fix overflow of time value * Revert "Fix overflow of time value" This reverts commit 084796920179e80a7500d36c25fd4d82b3ef4214. * That got boogered up * Remove PMSA003 include from modules * Add flag to exclude air quality module * Rework PMSA003I to align with new I2C scanner * Reworks AQ telemetry to match new dynamic allocation method * Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements * Reworks PMSA003I * Move add sensor template to separate file * Split telemetry on screen options * Add variable I2C clock compile flag * Added to Seeed Xiao S3 as demo * Fix drawFrame in AQ module * Module settings override to i2cScan module function * Move to CAN_RECLOCK_I2C per architecture * Add reclock function in TelemetrySensor.cpp * Add flag in ESP32 common * Minor fix * Move I2C reclock function to src/detect * Fix uninitMemberVar errors and compile issue * Make sleep, wakeUp functions generic * Fix STM32 builds * Add exclude AQ sensor to builds that have environmental sensor excludes * Add includes to AddI2CSensorTemplate.h * SEN5X first pass * WIP Sen5X functions * Further (non-working) progress in SEN5X * WIP Sen5X functions * Changes on SEN5X library - removing pm_env as well * Small cleanup of SEN5X sensors * Minor change for SEN5X detection * Remove dup code * Enable PM sensor before sending telemetry. This enables the PM sensor for a predefined period to allow for warmup. Once telemetry is sent, the sensor shuts down again. * Small cleanups in SEN5X sensor * Add dynamic measurement interval for SEN5X * Only disable SEN5X if enough time after reading. * Idle for SEN5X on communication error * Cleanup of logs and remove unnecessary delays * Small TODO * Settle on uint16_t for SEN5X PM data * Make AQTelemetry sensors non-exclusive * Implementation of cleaning in FS prefs and cleanup * Remove unnecessary LOGS * Add cleaning date storage in FS * Report non-cumulative PN * Bring back detection code for SEN5X after branch rebase * Add placeholder for admin message * Add VOC measurements and persistence (WIP) * Adds VOC measurements and state * Still not working on VOC Index persistence * Should it stay in continuous mode? * Add one-shot mode config flag to SEN5X * Add nan checks on sensor data from SEN5X * Working implementation on VOCState * Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h) * Adds conditions for stability and sensor state * Fixes on VOC state and mode swtiching * Adds a new RHT/Gas only mode, with 3600s stabilization time * Fixes the VOCState buffer mismatch * Fixes SEN50/54/55 model mistake * Adapt SEN5X to new sensor list structure. Improve reclock. * Improve reClockI2C conditions for different variants * Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery * Add SEN5X * Fix merge errors * Small reordering in PMS class for consistency * If one sensor fails, AQ telemetry still reports data * Small formatting fix * Add SEN5X to AQI in ScanI2C * SCD4X now part of AQ module with template list * Fixes difference between idle and sleep * In LowPower, sleep is disabled * Requires testing for I2C clock comms for commands * Remove unnecessary import * Add co2 to serialized AQ metrics * Add SFA30 with new sensor template in AQ module * Update library dependencies in platformio.ini * Fix unitialized variables in SEN5X constructor * Fix missing import * Fix uninitMemberVars * Fix import error for SCD4X * Fix I2CClock logic * Fix not reclocking back to 700000Hz * Fix multiple sensors being read simultaneously * The logic in AQ module is different to the one in EnvironmentTelemetryModule. In Env module, if any sensor fails to getMetrics, no valid flag for the module. This prevents other sensors to report data. * Fix pending clock change in PMSA003 * Cleanup of SEN5X class * Exclude AQ sensor from wio-e5 due to flash limitations * Fix I2C clock change logic * Make sure clock is always set to needed value * Fix returns * Fix trunk * Fix on condition in reclock * Fix trunk * Final SFA30 class implementation * Add HCHO to screen and improve logs * Add metrics to mesh packet serializer * Minor fixes in logs * OCD tidy up of logs * Fix sleep function * Remove old I2C_CLOCK_SPEED code --------- Co-authored-by: nikl <nikl174@mailbox.org> Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> Co-authored-by: Nashui-Yan <yannashui10@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Upgrade trunk (#9615) * chore(deps): update adafruit mpu6050 to v2.2.9 (#9611) * Log rxBad PacketHeaders with more info (id, relay_node) like printPacket, so we can try to match RX errors to other packets in the logs. (#9614) * chore(deps): update sensirion core to v0.7.3 (#9613) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update neopixel to v1.15.4 (#9616) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Exclude status message module * fix: zero entire public key array instead of only first byte (#9619) * Update protobufs (#9621) * Xiao NRF - define suitable i2c pins for the sub-variants (#8866) Co-authored-by: Christian Walther <cwalther@gmx.ch> * Upgrade trunk (#9631) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Update src/detect/ScanI2C.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/mesh/NodeDB.cpp Co-authored-by: Wessel <wessel@weebl.me> * convert GPS global and some new in gps.cpp to unique_ptr (#9628) Trying this to see if anything bad happen if I were to replace most raw pointers with unique_ptr. I didn't used std::make_unique since it is only supported in C++14 and onwards but until we update esp32 to arduino 3.x the ESP32 xtensa chips use a C++11 std. * replace delete in RedirectablePrint.cpp with std::unique_ptr (#9642) Is part of the unique_ptr modernization effort. * replace delete in EInkDynamicDisplay.{cpp,h} with std::unique_ptr (#9643) Is part of the unique_ptr modernization effort. * Undefine LED_BUILTIN for Heltec v2 variant (#9647) * Undefine LED_BUILTIN for Heltec v2 variant * Undefine LED_BUILTIN for Heltec v2.1 variant --------- Co-authored-by: Jorropo <jorropo.pgm@gmail.com> * replace delete in RadioInterface.cpp with std::unique_ptr (#9645) Is part of the unique_ptr modernization effort. * fix typo in PIN_GPS_SWITCH (#9648) Wasn't caught by CI. * replace delete in CryptoEngine.{cpp,h} with std::unique_ptr (#9649) Is part of the unique_ptr modernization effort. * workaround NCP5623 and LP5562 I2C builds (#9652) Theses two appear to be buggy on r1-neo and nomadstar meteor pro, they rely on Wire.h being included previously to their import. Idk why other platforms using the same smart LEDs are working while theses ones don't. This should make CI green on the dev branch. * replace delete in AudioThread.h with std::unique_ptr (#9651) Is part of the unique_ptr modernization effort. * Add USB_MODE=1 for Station G2 (#9660) * InkHUD: Favorite Map Applet (#9654) * fix a lot of low level cppcheck warnings (#9623) * simplify the observer pattern, since all the called functions are const getters. * use arduino macro over std: for numerical values and refactor local variables in drawScrollbar() * oh, so Cppcheck actually complained about const pointers not being const. * slowly getting out of ifdef hell * fix inkHUD warnings as well * last 2 check warnings * git checks should fail on low defects from now on * Feat/add scd30 (#9609) * Merge develop into SCD30 * Add SCD30 class * Fix logging and admin commands * Minor cleanup and logging improvements * Minor formatting issue Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Improvements on setTemperature * Fix casting float-uint16_t * Pass 100 for resetting temperature offset * Fix issues pointed out by copilot * Add quick reboot to set interval quicker on scd30 * Change saveState to only happen after boot and minor log changes * Fix missing semicolon in one shot mode log --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Upgrade trunk (#9661) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * fix: respect DontMqttMeBro flag regardless of channel PSK (#9626) The previous PSK check was broken from its introduction in #4643 — memcmp was used in boolean context without comparing to 0, inverting the condition. Since no one noticed for over a year, the PSK-based filtering provided no practical value. Simplifying to always respect the sender's preference is both more correct and easier to reason about. * our firmware action is too clever Update pio_target and add pio_opts for checks. * fix detection of SCD30 by checking if the size of the return from a 2 byte register read is correct (#9664) * fix detection of SCD30 by checking if thee size of the return from a 2 byte register read is correct fix signedness warning in PMSA003 sensor code. * Add alternate path for LPS22HB Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * check EndTransmission for errors and compare returned length to expected value Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * #9623 resolved a local shadow of next_key by converting it to int. (#9665) * zip a few gitrefs down (#9672) * InkHUD: Allow non-system applets to subscribe to input events (#9514) * Allow inkhud user applets to consume inputs with opt-in system Adds a way for applets to subscribe to input events while keeping it off by default to preserve compatibility and expected behaviours. Adds example for use as well. * Add check for nullptr on getActiveApplet uses * Remove redundant includes * Move subscribedInputs to protected * More consistent naming scheme * Upgrade trunk (#9671) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Concurrency: Modern Periodic wrapper class. (#9501) * chore(deps): update actions/stale action to v10.2.0 (#9669) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fake IAQ values on Non-BSEC2 platforms like Platformio and the original ESP32 (#9663) * BSEC2 Replacement - add approximation for IAQ to non-BSEC2 platforms. - Re-add this sensor to ESP32 targets, and refactor env_extra includes. - Fix C++ 11 compatibility * Check for gas resistance 0 * Upgrade trunk (#9683) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * ULED_BUILTIN for 9m2ibr_aprs_lora_tracker (#9685) * Upgrade trunk (#9692) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Develop to master (#9618) * Don't ever define PIN_LED or BLE_LED_INVERTED (#9494) * Don't ever define PIN_LED * Deprecate BLE_LED_INVERTED * Add StatusMessage module and config overrides (#9351) * Add StatusMessage module and config overrides * Trunk * Don't reboot node simply for a StatusMessage config update * Missed in reviews - fixing send bubble (#9505) * Prefer EXT_PWR_DETECT pin over chargingVolt to detect power unplugged (#9511) * Make sure we always return a value in NodeDB::restorePreferences() (#9516) In case FScom is not defined there is no return statement. This moves the return outside of the ifdef to make sure a defined value is returned. * Inkhud battery icon improvements. (#9513) * Inkhud battery icon improvements. Fixes the battery icon draining from the flat side towards the bump, which is backwards from general design language seen on most devices By request of kr0n05_ on discord, adds the ability to mirror the battery icon which fixes that issue in another way, and is also a common design seen on other devices. * Remove option for icon mirroring * Add border + dither to battery to prevent font overlap * Fix trunk format * Code cleanup, courtesy of Xaositek. * Add reply bot module with DM-only responses and rate limiting (#9456) * Implement Meshtastic reply bot module with ping and status features Adds a reply bot module that listens for /ping, /hello, and /test commands received via direct messages or broadcasts on the primary channel. The module always replies via direct message to the sender only, reporting hop count, RSSI, and SNR. Per-sender cooldowns are enforced to reduce network spam, and the module can be excluded at build time via a compile flag. Updates include the new module source files and required build configuration changes. * Update ReplyBotModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/ReplyBotModule.h Match the existing MESHTASTIC_EXCLUDE_* guard pattern so the module is excluded by default. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/ReplyBotModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Tidying up --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * HotFix for ReplyBot - Modules.cpp included and moved configuration.h (#9532) * Undefine LED_BUILTIN (#9531) Keep variant in sync with https://github.com/meshtastic/firmware/commit/df40085 Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Add agc reset attempt (#8163) * Add agc reset attempt * Add radioLibInterface include * Trunk * AGC reset don't crash, don't naively call * Update src/main.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use Throttle function --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove unused hmx variable (#9529) The variable is not used at all in the function, remove it to silence the compiler warning. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Rename LED_PIN to LED_POWER, move handling out of main to dedicated module (#9512) * Rename LED_PIN to LED_POWER, move handling out of main to dedicated module * Misc * Remove errant endif * Fix hop_limit upgrade detection (#9550) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * meshtasticd: Fix install on Fedora 43 (#9556) * RPM: Include meshtasticd-start.sh (#9561) * Add Slash Key to VirtualKeyboard (#9563) Addition of ? and / to the virtual Keyboard via short and long press * Add support for CW2015 LiPo battery fuel gauge (#9564) * Add support for CW2015 LiPo battery fuel gauge * Address Copilot's concerns, minor fixups * Make LED_POWER blip even in critical battery (#9545) * Enable FORTIFY and SP for native builds (#9537) * Enable FORITFY and NX for native builds meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. * Enable FORTIFY and NX for native builds meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. * Enable FORTIFY and SP for native builds meshtasticd does have a stack canaries and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and stack canaries. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Update built-in documentation for current method of implementation (#9592) * Refactor logging in ProtobufModule to ensure message details are logged after successful decoding (#9536) * Automated version bumps (#9604) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add missing openocd_target to custom nrf52 boards (#9603) This stops platformio complaining about `Missing target configuration for me25ls01-4y10td` etc when trying to flash with nrfutil. * Add sdl libs for native builds (#9595) * Add sdl libs for native builds * Alpine try again * fix some random compiler warnings (#9596) * Modify the dependency library of v4-tft (#9507) * BaseUI: Favorite Screen Signal Quality improvement (#9566) * Favorite Signal Quality improvement * Show Voltage if node shares it. * Trunk Fix * Change Favorite tittle to encase name with Asterisks * Add Pluggin In condition for Battery Line * Adjust getUptimeStr Prefixes * Create isAPIConnected for SharedCommon usage * Correct leftSideSpacing to account for isAPIConnected --------- Co-authored-by: Jason P <applewiz@mac.com> * ExternalNotification and StatusLED now call AmbientLighting to update… (#9554) * ExternalNotification and StatusLED now call AmbientLighting to update RGB LEDs. Add optional heartbeat * Don't overwrite RGB state if heartbeat is disabled. * Use the right define * Remove another .h and make rgb static * move rgb objects into AmbientLighting class * Straighten out AmbientLighting Thread object * Use %f for floats * Fixes on SCD4X admin comands (#9607) * Fixes on SCD4X admin comands * Minor fix in logs for SEN5X --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * feat/add sfa30 (#9372) * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Initial implementation for SFA30Sensor * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Add ScreenFonts.h Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> * PMSA003I 1st round test * Fix I2C scan speed * Fix minor issues and bring back I2C SPEED def * Remove PMSA003I library as its no longer needed * Add functional SCD4X * Fix screen frame for CO2 * Add admin commands to SCD4X class * Add further admin commands and fixes. * Remove unused I2C speed functions and cleanup * Cleanup of SEN5X specific c…

* fix some random compiler warnings (#9596) * Modify the dependency library of v4-tft (#9507) * Update protobufs (#9605) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Modify the dependency library of v4-tft (#9507) * BaseUI: Favorite Screen Signal Quality improvement (#9566) * Favorite Signal Quality improvement * Show Voltage if node shares it. * Trunk Fix * Change Favorite tittle to encase name with Asterisks * Add Pluggin In condition for Battery Line * Adjust getUptimeStr Prefixes * Create isAPIConnected for SharedCommon usage * Correct leftSideSpacing to account for isAPIConnected --------- Co-authored-by: Jason P <applewiz@mac.com> * ExternalNotification and StatusLED now call AmbientLighting to update… (#9554) * ExternalNotification and StatusLED now call AmbientLighting to update RGB LEDs. Add optional heartbeat * Don't overwrite RGB state if heartbeat is disabled. * Use the right define * Remove another .h and make rgb static * move rgb objects into AmbientLighting class * Straighten out AmbientLighting Thread object * Use %f for floats * Fixes on SCD4X admin comands (#9607) * Fixes on SCD4X admin comands * Minor fix in logs for SEN5X --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * feat/add sfa30 (#9372) * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Initial implementation for SFA30Sensor * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Add ScreenFonts.h Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> * PMSA003I 1st round test * Fix I2C scan speed * Fix minor issues and bring back I2C SPEED def * Remove PMSA003I library as its no longer needed * Add functional SCD4X * Fix screen frame for CO2 * Add admin commands to SCD4X class * Add further admin commands and fixes. * Remove unused I2C speed functions and cleanup * Cleanup of SEN5X specific code added from switching branches * Remove SCAN_I2C_CLOCK_SPEED block as its not needed * Remove associated functions for setting I2C speed * Unify build epoch to add flag in platformio-custom.py (#7917) * Unify build_epoch replacement logic in platformio-custom * Missed one * Fix build error in rak_wismesh_tap_v2 (#7905) In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices. * Put guards in place around debug heap operations (#7955) * Put guards in place around debug heap operations * Add macros to clean up code * Add pointer as well * Cleanup * Fix memory leak in NextHopRouter: always free packet copy when removing from pending * Formatting * Only queue 2 client notification * Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap * Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap * Update protobufs (#7973) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs * Trunk * Trunk * Static memory pool allocation (#7966) * Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev> * Portduino dynamic alloc * Missed * Drop the limit * Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix json report crashes on esp32 (#7978) * Tweak maximums * Fix DRAM overflow on old esp32 targets * Guard bad time warning logs using GPS_DEBUG (#7897) In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy. In combination, these result in a spamming of the logs when a bad time is found When the GPS is active, we're calling the GPS thread every 0.2secs. So this log could be printed 4,500 times in a no-lock scenario :) Reserve this experience for developers using GPS_DEBUG. Fixes https://github.com/meshtastic/firmware/issues/7896 * Scale probe buffer size based on current baud rate (#7975) * Scale probe buffer size based on current baud rate * Throttle bad time validation logging and fix time comparison logic * Remove comment * Missed the other instances * Copy pasta * Fix GPS gm_mktime memory leak (#7981) * Fix overflow of time value (#7984) * Fix overflow of time value * Revert "Fix overflow of time value" This reverts commit 084796920179e80a7500d36c25fd4d82b3ef4214. * That got boogered up * Remove PMSA003 include from modules * Add flag to exclude air quality module * Rework PMSA003I to align with new I2C scanner * Reworks AQ telemetry to match new dynamic allocation method * Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements * Reworks PMSA003I * Move add sensor template to separate file * Split telemetry on screen options * Add variable I2C clock compile flag * Added to Seeed Xiao S3 as demo * Fix drawFrame in AQ module * Module settings override to i2cScan module function * Move to CAN_RECLOCK_I2C per architecture * Add reclock function in TelemetrySensor.cpp * Add flag in ESP32 common * Minor fix * Move I2C reclock function to src/detect * Fix uninitMemberVar errors and compile issue * Make sleep, wakeUp functions generic * Fix STM32 builds * Add exclude AQ sensor to builds that have environmental sensor excludes * Add includes to AddI2CSensorTemplate.h * SEN5X first pass * WIP Sen5X functions * Further (non-working) progress in SEN5X * WIP Sen5X functions * Changes on SEN5X library - removing pm_env as well * Small cleanup of SEN5X sensors * Minor change for SEN5X detection * Remove dup code * Enable PM sensor before sending telemetry. This enables the PM sensor for a predefined period to allow for warmup. Once telemetry is sent, the sensor shuts down again. * Small cleanups in SEN5X sensor * Add dynamic measurement interval for SEN5X * Only disable SEN5X if enough time after reading. * Idle for SEN5X on communication error * Cleanup of logs and remove unnecessary delays * Small TODO * Settle on uint16_t for SEN5X PM data * Make AQTelemetry sensors non-exclusive * Implementation of cleaning in FS prefs and cleanup * Remove unnecessary LOGS * Add cleaning date storage in FS * Report non-cumulative PN * Bring back detection code for SEN5X after branch rebase * Add placeholder for admin message * Add VOC measurements and persistence (WIP) * Adds VOC measurements and state * Still not working on VOC Index persistence * Should it stay in continuous mode? * Add one-shot mode config flag to SEN5X * Add nan checks on sensor data from SEN5X * Working implementation on VOCState * Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h) * Adds conditions for stability and sensor state * Fixes on VOC state and mode swtiching * Adds a new RHT/Gas only mode, with 3600s stabilization time * Fixes the VOCState buffer mismatch * Fixes SEN50/54/55 model mistake * Adapt SEN5X to new sensor list structure. Improve reclock. * Improve reClockI2C conditions for different variants * Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery * Add SEN5X * Fix merge errors * Small reordering in PMS class for consistency * If one sensor fails, AQ telemetry still reports data * Small formatting fix * Add SEN5X to AQI in ScanI2C * SCD4X now part of AQ module with template list * Fixes difference between idle and sleep * In LowPower, sleep is disabled * Requires testing for I2C clock comms for commands * Remove unnecessary import * Add co2 to serialized AQ metrics * Add SFA30 with new sensor template in AQ module * Update library dependencies in platformio.ini * Fix unitialized variables in SEN5X constructor * Fix missing import * Fix uninitMemberVars * Fix import error for SCD4X * Fix I2CClock logic * Fix not reclocking back to 700000Hz * Fix multiple sensors being read simultaneously * The logic in AQ module is different to the one in EnvironmentTelemetryModule. In Env module, if any sensor fails to getMetrics, no valid flag for the module. This prevents other sensors to report data. * Fix pending clock change in PMSA003 * Cleanup of SEN5X class * Exclude AQ sensor from wio-e5 due to flash limitations * Fix I2C clock change logic * Make sure clock is always set to needed value * Fix returns * Fix trunk * Fix on condition in reclock * Fix trunk * Final SFA30 class implementation * Add HCHO to screen and improve logs * Add metrics to mesh packet serializer * Minor fixes in logs * OCD tidy up of logs * Fix sleep function * Remove old I2C_CLOCK_SPEED code --------- Co-authored-by: nikl <nikl174@mailbox.org> Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> Co-authored-by: Nashui-Yan <yannashui10@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Upgrade trunk (#9615) * chore(deps): update adafruit mpu6050 to v2.2.9 (#9611) * Log rxBad PacketHeaders with more info (id, relay_node) like printPacket, so we can try to match RX errors to other packets in the logs. (#9614) * chore(deps): update sensirion core to v0.7.3 (#9613) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update neopixel to v1.15.4 (#9616) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Exclude status message module * fix: zero entire public key array instead of only first byte (#9619) * Update protobufs (#9621) * Xiao NRF - define suitable i2c pins for the sub-variants (#8866) Co-authored-by: Christian Walther <cwalther@gmx.ch> * Upgrade trunk (#9631) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Update src/detect/ScanI2C.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/mesh/NodeDB.cpp Co-authored-by: Wessel <wessel@weebl.me> * convert GPS global and some new in gps.cpp to unique_ptr (#9628) Trying this to see if anything bad happen if I were to replace most raw pointers with unique_ptr. I didn't used std::make_unique since it is only supported in C++14 and onwards but until we update esp32 to arduino 3.x the ESP32 xtensa chips use a C++11 std. * replace delete in RedirectablePrint.cpp with std::unique_ptr (#9642) Is part of the unique_ptr modernization effort. * replace delete in EInkDynamicDisplay.{cpp,h} with std::unique_ptr (#9643) Is part of the unique_ptr modernization effort. * Undefine LED_BUILTIN for Heltec v2 variant (#9647) * Undefine LED_BUILTIN for Heltec v2 variant * Undefine LED_BUILTIN for Heltec v2.1 variant --------- Co-authored-by: Jorropo <jorropo.pgm@gmail.com> * replace delete in RadioInterface.cpp with std::unique_ptr (#9645) Is part of the unique_ptr modernization effort. * fix typo in PIN_GPS_SWITCH (#9648) Wasn't caught by CI. * replace delete in CryptoEngine.{cpp,h} with std::unique_ptr (#9649) Is part of the unique_ptr modernization effort. * workaround NCP5623 and LP5562 I2C builds (#9652) Theses two appear to be buggy on r1-neo and nomadstar meteor pro, they rely on Wire.h being included previously to their import. Idk why other platforms using the same smart LEDs are working while theses ones don't. This should make CI green on the dev branch. * replace delete in AudioThread.h with std::unique_ptr (#9651) Is part of the unique_ptr modernization effort. * Add USB_MODE=1 for Station G2 (#9660) * InkHUD: Favorite Map Applet (#9654) * fix a lot of low level cppcheck warnings (#9623) * simplify the observer pattern, since all the called functions are const getters. * use arduino macro over std: for numerical values and refactor local variables in drawScrollbar() * oh, so Cppcheck actually complained about const pointers not being const. * slowly getting out of ifdef hell * fix inkHUD warnings as well * last 2 check warnings * git checks should fail on low defects from now on * Feat/add scd30 (#9609) * Merge develop into SCD30 * Add SCD30 class * Fix logging and admin commands * Minor cleanup and logging improvements * Minor formatting issue Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Improvements on setTemperature * Fix casting float-uint16_t * Pass 100 for resetting temperature offset * Fix issues pointed out by copilot * Add quick reboot to set interval quicker on scd30 * Change saveState to only happen after boot and minor log changes * Fix missing semicolon in one shot mode log --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Upgrade trunk (#9661) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * fix: respect DontMqttMeBro flag regardless of channel PSK (#9626) The previous PSK check was broken from its introduction in #4643 — memcmp was used in boolean context without comparing to 0, inverting the condition. Since no one noticed for over a year, the PSK-based filtering provided no practical value. Simplifying to always respect the sender's preference is both more correct and easier to reason about. * our firmware action is too clever Update pio_target and add pio_opts for checks. * fix detection of SCD30 by checking if the size of the return from a 2 byte register read is correct (#9664) * fix detection of SCD30 by checking if thee size of the return from a 2 byte register read is correct fix signedness warning in PMSA003 sensor code. * Add alternate path for LPS22HB Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * check EndTransmission for errors and compare returned length to expected value Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * #9623 resolved a local shadow of next_key by converting it to int. (#9665) * zip a few gitrefs down (#9672) * InkHUD: Allow non-system applets to subscribe to input events (#9514) * Allow inkhud user applets to consume inputs with opt-in system Adds a way for applets to subscribe to input events while keeping it off by default to preserve compatibility and expected behaviours. Adds example for use as well. * Add check for nullptr on getActiveApplet uses * Remove redundant includes * Move subscribedInputs to protected * More consistent naming scheme * Upgrade trunk (#9671) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Concurrency: Modern Periodic wrapper class. (#9501) * chore(deps): update actions/stale action to v10.2.0 (#9669) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fake IAQ values on Non-BSEC2 platforms like Platformio and the original ESP32 (#9663) * BSEC2 Replacement - add approximation for IAQ to non-BSEC2 platforms. - Re-add this sensor to ESP32 targets, and refactor env_extra includes. - Fix C++ 11 compatibility * Check for gas resistance 0 * Upgrade trunk (#9683) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * ULED_BUILTIN for 9m2ibr_aprs_lora_tracker (#9685) * Upgrade trunk (#9692) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Develop to master (#9618) * Don't ever define PIN_LED or BLE_LED_INVERTED (#9494) * Don't ever define PIN_LED * Deprecate BLE_LED_INVERTED * Add StatusMessage module and config overrides (#9351) * Add StatusMessage module and config overrides * Trunk * Don't reboot node simply for a StatusMessage config update * Missed in reviews - fixing send bubble (#9505) * Prefer EXT_PWR_DETECT pin over chargingVolt to detect power unplugged (#9511) * Make sure we always return a value in NodeDB::restorePreferences() (#9516) In case FScom is not defined there is no return statement. This moves the return outside of the ifdef to make sure a defined value is returned. * Inkhud battery icon improvements. (#9513) * Inkhud battery icon improvements. Fixes the battery icon draining from the flat side towards the bump, which is backwards from general design language seen on most devices By request of kr0n05_ on discord, adds the ability to mirror the battery icon which fixes that issue in another way, and is also a common design seen on other devices. * Remove option for icon mirroring * Add border + dither to battery to prevent font overlap * Fix trunk format * Code cleanup, courtesy of Xaositek. * Add reply bot module with DM-only responses and rate limiting (#9456) * Implement Meshtastic reply bot module with ping and status features Adds a reply bot module that listens for /ping, /hello, and /test commands received via direct messages or broadcasts on the primary channel. The module always replies via direct message to the sender only, reporting hop count, RSSI, and SNR. Per-sender cooldowns are enforced to reduce network spam, and the module can be excluded at build time via a compile flag. Updates include the new module source files and required build configuration changes. * Update ReplyBotModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/ReplyBotModule.h Match the existing MESHTASTIC_EXCLUDE_* guard pattern so the module is excluded by default. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/ReplyBotModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Tidying up --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * HotFix for ReplyBot - Modules.cpp included and moved configuration.h (#9532) * Undefine LED_BUILTIN (#9531) Keep variant in sync with https://github.com/meshtastic/firmware/commit/df40085 Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Add agc reset attempt (#8163) * Add agc reset attempt * Add radioLibInterface include * Trunk * AGC reset don't crash, don't naively call * Update src/main.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Use Throttle function --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove unused hmx variable (#9529) The variable is not used at all in the function, remove it to silence the compiler warning. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Rename LED_PIN to LED_POWER, move handling out of main to dedicated module (#9512) * Rename LED_PIN to LED_POWER, move handling out of main to dedicated module * Misc * Remove errant endif * Fix hop_limit upgrade detection (#9550) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * meshtasticd: Fix install on Fedora 43 (#9556) * RPM: Include meshtasticd-start.sh (#9561) * Add Slash Key to VirtualKeyboard (#9563) Addition of ? and / to the virtual Keyboard via short and long press * Add support for CW2015 LiPo battery fuel gauge (#9564) * Add support for CW2015 LiPo battery fuel gauge * Address Copilot's concerns, minor fixups * Make LED_POWER blip even in critical battery (#9545) * Enable FORTIFY and SP for native builds (#9537) * Enable FORITFY and NX for native builds meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. * Enable FORTIFY and NX for native builds meshtasticd does have an executable stack and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and a non-executable stack. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. * Enable FORTIFY and SP for native builds meshtasticd does have a stack canaries and is not built with fortify, which makes exploitation of memory corruption bugs easier than it has to be. This enables fortify and stack canaries. This gives the following improvements on Debian Trixie: $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO No canary found NX enabled PIE enabled No RPATH No RUNPATH 13516 Symbols No 0 17 ./.pio/build/native/meshtasticd $ checksec --file=./.pio/build/native/meshtasticd RELRO STACK CANARY NX PIE RPATH RUNPATH Symbols FORTIFY Fortified Fortifiable FILE Partial RELRO Canary found NX enabled PIE enabled No RPATH No RUNPATH 13519 Symbols Yes 12 20 ./.pio/build/native/meshtasticd Tested with --sim mode I do not get any crashes or similar. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Update built-in documentation for current method of implementation (#9592) * Refactor logging in ProtobufModule to ensure message details are logged after successful decoding (#9536) * Automated version bumps (#9604) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add missing openocd_target to custom nrf52 boards (#9603) This stops platformio complaining about `Missing target configuration for me25ls01-4y10td` etc when trying to flash with nrfutil. * Add sdl libs for native builds (#9595) * Add sdl libs for native builds * Alpine try again * fix some random compiler warnings (#9596) * Modify the dependency library of v4-tft (#9507) * BaseUI: Favorite Screen Signal Quality improvement (#9566) * Favorite Signal Quality improvement * Show Voltage if node shares it. * Trunk Fix * Change Favorite tittle to encase name with Asterisks * Add Pluggin In condition for Battery Line * Adjust getUptimeStr Prefixes * Create isAPIConnected for SharedCommon usage * Correct leftSideSpacing to account for isAPIConnected --------- Co-authored-by: Jason P <applewiz@mac.com> * ExternalNotification and StatusLED now call AmbientLighting to update… (#9554) * ExternalNotification and StatusLED now call AmbientLighting to update RGB LEDs. Add optional heartbeat * Don't overwrite RGB state if heartbeat is disabled. * Use the right define * Remove another .h and make rgb static * move rgb objects into AmbientLighting class * Straighten out AmbientLighting Thread object * Use %f for floats * Fixes on SCD4X admin comands (#9607) * Fixes on SCD4X admin comands * Minor fix in logs for SEN5X --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * feat/add sfa30 (#9372) * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Initial implementation for SFA30Sensor * Move PMSA003I to separate class and update AQ telemetry * AirQualityTelemetry module not depend on PM sensor presence * Remove commented line * Fixes on PMS class * Add missing warmup period to wakeUp function * Fixes on compilation for different variants * Add functions to check for I2C bus speed and set it * Add ScreenFonts.h Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> * PMSA003I 1st round test * Fix I2C scan speed * Fix minor issues and bring back I2C SPEED def * Remove PMSA003I library as its no longer needed * Add functional SCD4X * Fix screen frame for CO2 * Add admin commands to SCD4X class * Add further admin commands and fixes. * Remove unused I2C speed functions and cleanup * Cleanup of SEN5X specific code added from switching branches * Remove SCAN_I2C_CLOCK_SPEED block as its not needed * Remove associated functions for setting I2C speed * Unify build epoch to add flag in platformio-custom.py (#7917) * Unify build_epoch replacement logic in platformio-custom * Missed one * Fix build error in rak_wismesh_tap_v2 (#7905) In the logs was: "No screen resolution defined in build_flags. Please define DISPLAY_SIZE." set according to similar devices. * Put guards in place around debug heap operations (#7955) * Put guards in place around debug heap operations * Add macros to clean up code * Add pointer as well * Cleanup * Fix memory leak in NextHopRouter: always free packet copy when removing from pending * Formatting * Only queue 2 client notification * Merge pull request #7965 from compumike/compumike/fix-nrf52-bluetooth-memory-leak Fix memory leak in `NRF52Bluetooth`: allocate `BluetoothStatus` on stack, not heap * Merge pull request #7964 from compumike/compumike/fix-nimble-bluetooth-memory-leak Fix memory leak in `NimbleBluetooth`: allocate `BluetoothStatus` on stack, not heap * Update protobufs (#7973) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs * Trunk * Trunk * Static memory pool allocation (#7966) * Static memory pool * Initializer * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs --------- Co-authored-by: WillyJL <me@willyjl.dev> * Portduino dynamic alloc * Missed * Drop the limit * Update meshtastic-esp8266-oled-ssd1306 digest to 0cbc26b (#7977) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix json report crashes on esp32 (#7978) * Tweak maximums * Fix DRAM overflow on old esp32 targets * Guard bad time warning logs using GPS_DEBUG (#7897) In 2.7.7 / 2.7.8 we introduced some new checks for time accuracy. In combination, these result in a spamming of the logs when a bad time is found When the GPS is active, we're calling the GPS thread every 0.2secs. So this log could be printed 4,500 times in a no-lock scenario :) Reserve this experience for developers using GPS_DEBUG. Fixes https://github.com/meshtastic/firmware/issues/7896 * Scale probe buffer size based on current baud rate (#7975) * Scale probe buffer size based on current baud rate * Throttle bad time validation logging and fix time comparison logic * Remove comment * Missed the other instances * Copy pasta * Fix GPS gm_mktime memory leak (#7981) * Fix overflow of time value (#7984) * Fix overflow of time value * Revert "Fix overflow of time value" This reverts commit 084796920179e80a7500d36c25fd4d82b3ef4214. * That got boogered up * Remove PMSA003 include from modules * Add flag to exclude air quality module * Rework PMSA003I to align with new I2C scanner * Reworks AQ telemetry to match new dynamic allocation method * Adds VBLE_I2C_CLOCK_SPEED build flag for sensors with different I2C speed requirements * Reworks PMSA003I * Move add sensor template to separate file * Split telemetry on screen options * Add variable I2C clock compile flag * Added to Seeed Xiao S3 as demo * Fix drawFrame in AQ module * Module settings override to i2cScan module function * Move to CAN_RECLOCK_I2C per architecture * Add reclock function in TelemetrySensor.cpp * Add flag in ESP32 common * Minor fix * Move I2C reclock function to src/detect * Fix uninitMemberVar errors and compile issue * Make sleep, wakeUp functions generic * Fix STM32 builds * Add exclude AQ sensor to builds that have environmental sensor excludes * Add includes to AddI2CSensorTemplate.h * SEN5X first pass * WIP Sen5X functions * Further (non-working) progress in SEN5X * WIP Sen5X functions * Changes on SEN5X library - removing pm_env as well * Small cleanup of SEN5X sensors * Minor change for SEN5X detection * Remove dup code * Enable PM sensor before sending telemetry. This enables the PM sensor for a predefined period to allow for warmup. Once telemetry is sent, the sensor shuts down again. * Small cleanups in SEN5X sensor * Add dynamic measurement interval for SEN5X * Only disable SEN5X if enough time after reading. * Idle for SEN5X on communication error * Cleanup of logs and remove unnecessary delays * Small TODO * Settle on uint16_t for SEN5X PM data * Make AQTelemetry sensors non-exclusive * Implementation of cleaning in FS prefs and cleanup * Remove unnecessary LOGS * Add cleaning date storage in FS * Report non-cumulative PN * Bring back detection code for SEN5X after branch rebase * Add placeholder for admin message * Add VOC measurements and persistence (WIP) * Adds VOC measurements and state * Still not working on VOC Index persistence * Should it stay in continuous mode? * Add one-shot mode config flag to SEN5X * Add nan checks on sensor data from SEN5X * Working implementation on VOCState * Adds initial timer for SEN55 to not sleep if VOCstate is not stable (1h) * Adds conditions for stability and sensor state * Fixes on VOC state and mode swtiching * Adds a new RHT/Gas only mode, with 3600s stabilization time * Fixes the VOCState buffer mismatch * Fixes SEN50/54/55 model mistake * Adapt SEN5X to new sensor list structure. Improve reclock. * Improve reClockI2C conditions for different variants * Add sleep, wakeUp, pendingForReady, hasSleep functions to PM sensors to save battery * Add SEN5X * Fix merge errors * Small reordering in PMS class for consistency * If one sensor fails, AQ telemetry still reports data * Small formatting fix * Add SEN5X to AQI in ScanI2C * SCD4X now part of AQ module with template list * Fixes difference between idle and sleep * In LowPower, sleep is disabled * Requires testing for I2C clock comms for commands * Remove unnecessary import * Add co2 to serialized AQ metrics * Add SFA30 with new sensor template in AQ module * Update library dependencies in platformio.ini * Fix unitialized variables in SEN5X constructor * Fix missing import * Fix uninitMemberVars * Fix import error for SCD4X * Fix I2CClock logic * Fix not reclocking back to 700000Hz * Fix multiple sensors being read simultaneously * The logic in AQ module is different to the one in EnvironmentTelemetryModule. In Env module, if any sensor fails to getMetrics, no valid flag for the module. This prevents other sensors to report data. * Fix pending clock change in PMSA003 * Cleanup of SEN5X class * Exclude AQ sensor from wio-e5 due to flash limitations * Fix I2C clock change logic * Make sure clock is always set to needed value * Fix returns * Fix trunk * Fix on condition in reclock * Fix trunk * Final SFA30 class implementation * Add HCHO to screen and improve logs * Add metrics to mesh packet serializer * Minor fixes in logs * OCD tidy up of logs * Fix sleep function * Remove old I2C_CLOCK_SPEED code --------- Co-authored-by: nikl <nikl174@mailbox.org> Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> Co-authored-by: Nashui-Yan <yannashui10@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Log rxBad PacketHeaders with more info (id, relay_node) like printPacket, so we can try to match RX errors to other packets in the logs. (#9614) * Exclude status message module * fix: zero entire public key array instead of only first byte (#9619) * Update protobufs (#9621) * Xiao NRF - define suitable i2c pins for the sub-variants (#8866) Co-authored-by: Christian Walther <cwalther@gmx.ch> * Update src/detect/ScanI2C.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/modules/Telemetry/Sensor/SFA30Sensor.cpp Co-authored-by: Wessel <wessel@weebl.me> * Update src/mesh/NodeDB.cpp Co-authored-by: Wessel <wessel@weebl.me> * convert GPS global and some new in gps.cpp to unique_ptr (#9628) Trying this to see if anything bad happen if I were to replace most raw pointers with unique_ptr. I didn't used std::make_unique since it is only supported in C++14 and onwards but until we update esp32 to arduino 3.x the ESP32 xtensa chips use a C++11 std. * replace delete in RedirectablePrint.cpp with std::unique_ptr (#9642) Is part of the unique_ptr modernization effort. * replace delete in EInkDynamicDisplay.{cpp,h} with std::unique_ptr (#9643) Is part of the unique_ptr modernization effort. * Undefine LED_BUILTIN for Heltec v2 variant (#9647) * Undefine LED_BUILTIN for Heltec v2 variant * Undefine LED_BUILTIN for Heltec v2.1 variant --------- Co-authored-by: Jorropo <jorropo.pgm@gmail.com> * replace delete in RadioInterface.cpp with std::unique_ptr (#9645) Is part of the unique_ptr modernization effort. * fix typo in PIN_GPS_SWITCH (#9648) Wasn't caught by CI. * replace delete in CryptoEngine.{cpp,h} with std::unique_ptr (#9649) Is part of the unique_ptr modernization effort. * workaround NCP5623 and LP5562 I2C builds (#9652) Theses two appear to be buggy on r1-neo and nomadstar meteor pro, they rely on Wire.h being included previously to their import. Idk why other platforms using the same smart LEDs are working while theses ones don't. This should make CI green on the dev branch. * replace delete in AudioThread.h with std::unique_ptr (#9651) Is part of the unique_ptr modernization effort. * Add USB_MODE=1 for Station G2 (#9660) * InkHUD: Favorite Map Applet (#9654) * fix a lot of low level cppcheck warnings (#9623) * simplify the observer pattern, since all the called functions are const getters. * use arduino macro over std: for numerical values and refactor local variables in drawScrollbar() * oh, so Cppcheck actually complained about const pointers not being const. * slowly getting out of ifdef hell * fix inkHUD warnings as well * last 2 check warnings * git checks should fail on low defects from now on * Feat/add scd30 (#9609) * Merge develop into SCD30 * Add SCD30 class * Fix logging and admin commands * Minor cleanup and logging improvements * Minor formatting issue Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Improvements on setTemperature * Fix casting float-uint16_t * Pass 100 for resetting temperature offset * Fix issues pointed out by copilot * Add quick reboot to set interval quicker on scd30 * Change saveState to only happen after boot and minor log changes * Fix missing semicolon in one shot mode log --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * fix: respect DontMqttMeBro flag regardless of channel PSK (#9626) The previous PSK check was broken from its introduction in #4643 — memcmp was used in boolean context without comparing to 0, inverting the condition. Since no one noticed for over a year, the PSK-based filtering provided no practical value. Simplifying to always respect the sender's preference is both more correct and easier to reason about. * our firmware action is too clever Update pio_target and add pio_opts for checks. * fix detection of SCD30 by checking if the size of the return from a 2 byte register read is correct (#9664) * fix detection of SCD30 by checking if thee size of the return from a 2 byte register read is correct fix signedness warning in PMSA003 sensor code. * Add alternate path for LPS22HB Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * check EndTransmission for errors and compare returned length to expected value Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * #9623 resolved a local shadow of next_key by converting it to int. (#9665) * zip a few gitrefs down (#9672) * InkHUD: Allow non-system applets to subscribe to input events (#9514) * Allow inkhud user applets to consume inputs with opt-in system Adds a way for applets to subscribe to input events while keeping it off by default to preserve compatibility and expected behaviours. Adds example for use as well. * Add check for nullptr on getActiveApplet uses * Remove redundant includes * Move subscribedInputs to protected * More consistent naming scheme * Fake IAQ values on Non-BSEC2 platforms like Platformio and the original ESP32 (#9663) * BSEC2 Replacement - add approximation for IAQ to non-BSEC2 platforms. - Re-add this sensor to ESP32 targets, and refactor env_extra includes. - Fix C++ 11 compatibility * Check for gas resistance 0 * ULED_BUILTIN for 9m2ibr_aprs_lora_tracker (#9685) --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: Eric Sesterhenn <eric.sesterhenn@x41-dsec.de> Co-authored-by: Vortetty <33466216+Vortetty@users.noreply.github.com> Co-authored-by: Mattatat25 <108779801+mattatat25@users.noreply.github.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Max <rekin.m@gmail.com> Co-authored-by: Colby Dillion <colby.dillion@pacshealth.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom <116762865+NomDeTom@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: Chloe Bethel <chloe@9net.org> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: oscgonfer <oscgonfer@users.noreply.github.com> Co-authored-by: nikl <nikl174@mailbox.org> Co-authored-by: Hannes Fuchs <hannes.fuchs+git@0xef.de> Co-authored-by: Nashui-Yan <yannashui10@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Mike Robbins <mrobbins@alum.mit.edu> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> Co-authored-by: Wessel <wessel@weebl.me> Co-authored-by: Christian Walther <cwalther@gmx.ch> Co-authored-by: Jorropo <jorropo.pgm@gmail.com> Co-authored-by: Eric Barch <ericb@ericbarch.com> Co-authored-by: Clive Blackledge <clive@ansible.org> * Trunk * Update meshtastic-GxEPD2 digest to c7eb4c3 (#9694) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * skip header items when enabling the InkHUD menu cursor (#9552) * onNavUp() sets the menu cursor to the last item if not shown * skip headers when showing the menu cursor in onNavUp() and onNavDown() * skip headers when showing the menu cursor in onButtonShortPress() * brace cursor incrementing --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> * Upgrade trunk (#9696) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * BLE Pairing fix (#9701) * BLE Pairing fix * gating for consistency --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Revert "Add agc reset attempt (#8163)" (#9702) This reverts commit ac611c4b6262ae54336317c9e4167827ba6edd78. * Add #include "RadioLibInterface.h" * Hold GC1109 FEM power during deep sleep for LNA RX wake (#9572) * Hold GC1109 PA_POWER and PA_EN during deep sleep for LNA RX wake Use rtc_gpio_hold_en to latch PA_POWER (LDO) and PA_EN (CSD) HIGH during deep sleep so the GC1109 LNA remains powered for wake-on-packet RX. Previously these pins used weak pull-ups which could lose state. On deep sleep wake, skip these pins in the blanket RTC hold release and instead release them in SX126xInterface::init() after GPIO registers are set HIGH first, avoiding a power glitch on the GC1109. Trade-off: ~6.5mA additional deep sleep current for significantly improved wake-on-packet RX sensitivity (~17dB). Reference: https://github.com/meshcore-dev/MeshCore/pull/1600 * Add LDO startup delay before GC1109 chip enable TLV75733P LDO has ~550us startup time (datasheet tSTR). On cold boot, wait 1ms for VBAT to stabilise before driving CSD/CPS, per GC1109 power-on sequence requirement. On deep sleep wake the LDO is held on via RTC latch so no delay is needed. * Fix/rak3401 button (#9668) * RadioLib edge-triggered interrupts robustness (#9658) * Fix potential race condition (read, ISR write, clear) in NotifiedWorkerThread * Check for missed edge-triggered interrupts race condition between startReceive and enableInterrupt * Occasionally poll to catch missed RX_DONE interrupts. (RadioLibInterface::pollMissedIrqs) * Simplify RadioLibInterface::checkRxDoneIrqFlag() --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Limit http connections and add free heap check before allocating for SSL (#9693) * Reduce maximum concurrent HTTPS connections to save memory * Add heap check and limit connections to prevent HTTPS connection related crashes * Use Throttle::isWithinTimespanMs for overflow-safe heap warning throttle * Update src/mesh/http/WebServer.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Fix double-free heap corruption and parser leak in web server handlers - Remove double-free in handleFsBrowseStatic, handleNodes, handleScanNetworks: JSONValue(const JSONArray&) shallow-copies pointers, so delete value already recursively frees all elements. The explicit cleanup loops were deleting the same pointers a second time, corrupting the ESP32 heap allocator metadata. This is the likely root cause of #8827 (SSL setup failures after uptime). - Fix memory leak in handleFormUpload: two early-return paths were missing delete parser. - Remove unused global HTTPClient httpClient and its includes. --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply SX1262 register 0x8B5 patch for improved GC1109 RX sensitivity (#9571) * Apply SX1262 register 0x8B5 patch for improved GC1109 RX sensitivity Sets the LSB of undocumented SX1262 register 0x8B5 on Heltec V4 and Wireless Tracker V2 boards with the GC1109 FEM. This patch was recommended by Heltec/Semtech and tested in MeshCore PR #1398, where it significantly reduced packet loss on the Heltec V4. * Use higher level function * Add .venv/ to .gitignore * chore(deps): update radiolib to v7.6.0 (#9695) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update radiolib to v7.6.0 (#9695) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Split module includes for AQ module (#9711) * Upgrade trunk (#9724) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Support mini ePaper S3 Kit (#9335) * initial draft * update DC pin * add ADC channel * fix e-ink display * update GxEPD2 reference * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * meshtasticd: Add Luckfox Lyra Hat pinmaps (#9730) Luckfox Lyra Plus + Waveshare Pi Pico Hat Luckfox Lyra Ultra + wehooper4's "Luckfox Ultra" hat. * chore(deps): update meshtastic-st7789 digest to 9ee76d6 (#9729) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update sensorlib to v0.3.4 (#9727) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Upgrade trunk (#9731) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * FIx loophole with telemetry coercion * Implement 'agc' reset for SX126x & LR11x0 chip families (#9705) * Implement 'agc' reset for SX126x chip family There's no actual agc on SX126x chips but you can reset the analog registers by doing a warm sleep & running calibration. * Address PR comments & implement for LR11x0 too * calibrate for configured frequency band * Gate LR11X0_AGC_RESET * Align telemetry broadcast want_response behavior with traceroute (#9717) * Align telemetry broadcast want_response behavior with traceroute * Fixes * Reduce side-effects by making the telemetry modules handle the ignorerequest * Remove unnecessary ignoreRequest flag * Try inheriting from MeshModule * Add exclusion for sensor/router roles and add base telem module * Update protobufs (#9739) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * fail cppcheck on low already. Code quality for the win. * Remove unused global rIf that shadows locals and fails cppcheck (#9743) I noticed because my PR failed * hopefully fix remaining cppcheck issues (#9745) * Revert "Fix/rak3401 button (#9668)" (#9747) This reverts commit a5523b04ef30bb5c62a56abd2f49c5a592b628ad. * Upgrade trunk (#9744) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Add GPIO_DETECT_PA portduino config, and support 13302 detection with it (#9741) * Add GPIO_DETECT_PA portduino config, and support 13302 detection with it. * Tweak PA detect gpio to use pinMapping * minor yaml output fixes --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * platform: nrf52: Fix typo in BLEDfuSecure filename (#9709) Change file name from BLEDfuScure.cpp to BLEDfuSecure.cpp. Fix filenames in documentation. Signed-off-by: Koko <github@kokosoftware.pl> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Add Transmit history persistence for respecting traffic intervals between reboots (#9748) * Add transmit history for throttling that persists between reboots * Fix RAK long press detection to prevent phantom shutdowns from floating pins * Update test/test_transmit_history/test_main.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Test fixes and placeholder for content handler tests --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Fix Bluetooth on RAK Ethernet Gateway by removing MESHTASTIC_EXCLUDE_POWER_FSM from build_flags (#9755) * chore(deps): update adafruit_tsl2561 to v1.1.3 (#9757) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update adafruit mlx90614 to v2.1.6 (#9756) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update platformio/espressif32 to v6.13.0 (#9759) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update platformio/nordicnrf52 to v10.11.0 (#9760) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * fix(MQTT): Send first MapReport as soon as possible (#8872) * fix(MQTT): First MapReport does not get sent Throttle::isWithinTimespanMs(last_report_to_map, map_publish_interval_msecs) is used to maintain the map reporting interval, but because last_report_to_map has an initial value of 0, the map report routine does not start until the system millis() time has passed map_publish_interval_msecs. Fix this by adding a check that last_report_to_map is not 0. Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(MQTT): Send MapReporting immediately upon location fix Do not update last_report_to_map when Map Report is attempted without a valid location, as this results in waiting up to an hour (or configured Map Report interval). That usually happens because most nodes do not keep GPS warm, so GPS usually locks after the first attempt at Map Report. This change also results in the log WARNing message getting spammed until a location is obtained, so remove the message for now. Signed-off-by: Andrew Yong <me@ndoo.sg> * feat(MQTT): Throttled warning when position is not available for MapReport Signed-off-by: Andrew Yong <me@ndoo.sg> --------- Signed-off-by: Andrew Yong <me@ndoo.sg> * Don't launch canned message when waking screen or silencing notification (#9762) * Don't launch canned message when waking screen or silencing notification * Add screen ifdefs * Get the #if right --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Fix mqtt test * Unlock 0x8B5 register macro guard for SX162 (#9777) * chore(deps): update adafruit ahtx0 to v2.0.6 (#9766) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update adafruit dps310 to v1.1.6 (#9763) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update platformio/ststm32 to v19.5.0 (#9764) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Upgrade trunk (#9752) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Increase PSRAM malloc threshold from 256 bytes to 2048 bytes (#9758) * enhancement(mesh): remove late packets from tx queue when full (#9779) * enhance tx queue priority management In busy environments, especially for ROUTER_LATE role, tx queue fills very quickly. Delayed packets became late but new packets to be retransmitted won't be put into the tx queue as old ones stay there for a very long time (even a minute or more). This change makes meshtastic prioritize new packets over late packets from tx queue and allows to remove late packet from back of tx queue when there is no space for a new one. * apply copilot recommendation for cast --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Update log verbiage to remove GC1109 reference * avoid memory leak when possibly malformed packet received (#9781) getByIndex allocates memory and returns dummy channel whenever chIndex validation fails. Comment implies this may happen when malformed packet is received. The fix changes implementation so static dummyChannel is returned in such case. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Bug: Mqtt fix testcase due to immediately sending MapReport (#8872) (#9784) * Add ESP32 Power Management lessons learned document Documents our experimentation with ESP-IDF DFS and why it doesn't work well for Meshtastic (RTOS locks, BLE locks, USB issues). Proposes simpler alternative: manual setCpuFrequencyMhz() control with explicit triggers for when to go fast vs slow. * Added a lambda function to clear startup output in the MQTT unit test to ensure a clean state before and after the MQTT subscription process. * Upgrade trunk (#9785) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * chore(deps): update github artifact actions (#9767) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update crazy-max/ghaction-import-gpg action to v7 (#9787) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Add ADS1115 ADC to recognition as used on RAK6421 Hat (#9790) * Remove "x" permission bits from some source files (#9794) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Upgrade trunk (#9795) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Update protobufs (#9797) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Improve resource cleanup on connection close (and make server API a unique pointer) (#9799) * Improve resource cleanup on connection close * Copilot had some good feedback. Let's just make the api a unique pointer * Update src/mesh/api/ServerAPI.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Copilot stupidly suggesting we call protected methods * Gotta do it in the superclasses as well * Fix moar * Refactor MQTT unit test to ensure proper subscription handling and clear side effects --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * spelling fixes (#9801) 45 corrections in c++ source comments limited to 27 files in src/gps src/graphics src/input * chore(deps): update docker/login-action action to v4 (#9806) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update docker/setup-qemu-action action to v4 (#9807) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Deb: Handle offline builds more gracefully (#9791) * Upgrade trunk (#9805) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * chore(deps): update arduinojson to v6.21.6 (#9788) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update dorny/test-reporter action to v2.6.0 (#9796) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Scaling tweaks (#9653) * refactor: update throttling factor calculation and add unit tests for scaling behavior * refactor: adjust throttling factor calculation for improved accuracy in different configurations * Update src/mesh/Default.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/mesh/Default.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * refactor: enhance throttling factor calculation and introduce pow_of_2 utility function * refactor: improve expected ms calculation in unit tests for Default::getConfiguredOrDefaultMsScaled * refactor: improve scaling logic for routers and sensors in computeExpectedMs function --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Add heltec-v4.3 board (#9753) * Add heltec-v4.3 board * Modify LNA control display content * Fix Heltec Tracker v2 FEM control * Use trunk to fix formatting issues. * Optimize the fem initialization control logic. * Update src/mesh/RadioInterface.h change #ifdef to #if Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Change LORA_PA_EN to LORA_GC1109_PA_EN. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Remove the NodeDB.h include. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Change tx_gain to a const variable. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Fixed the issue where ARCH_PORTDUINO lacked the NUM_PA_POINTS macro. * Remove the comment. Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Move #pragma once to the first line. * Remove the FEM LNA control menu. * Add description for KCT8103L. --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Add some lora parameter clamping logic to coalesce to defaults and enforce some bounds (#9808) * Add back FEM LNA mode configuration for LoRa (#9809) * Add back FEM LNA mode configuration for LoRa * Update src/mesh/NodeDB.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update src/modules/AdminModule.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * copilot garbage --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * spelling fixes in .md files (#9810) 9 fixes across 6 files notably includes github/pull_request_template.md * fix: add ROUTER_LATE to infrastructure init and config preservation (#9820) ROUTER_LATE now preserves node_info_broadcast_secs during factory reset and auto-enables Store & Forward server mode, matching ROUTER infrastructure behavior. * fix: add ROUTER_LATE to telemetry impolite role check (#9819) ROUTER_LATE should be treated as an impolite telemetry role like ROUTER, responding to multi-hop broadcast requests and using aggressive send timing without channel utilization checks. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Update protobufs (#9825) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * fix: prevent router-like roles from auto-favoriting DM peers (#9821) ROUTER and ROUTER_LATE should not accumulate favorites by sending DMs. Also replaces magic number 12 with meshtastic_Config_DeviceConfig_Role_CLIENT_BASE. * Upgrade trunk (#9823) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * fix: add ROUTER_LATE and TAK_TRACKER to congestion scaling exemption (#9818) ROUTER_LATE already has high base intervals and should not be further scaled by congestion. TAK_TRACKER is a tracker variant that should skip congestion scaling like TRACKER does. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * fix: treat ROUTER_LATE like ROUTER for power management and defaults (#9815) ROUTER_LATE is an infrastructure relay that should use the same power assumptions, interval defaults, and LoRa wake behavior as ROUTER. Without this, ROUTER_LATE uses client-class defaults and will not wake on LoRa activity from deep sleep, making it a broken relay. Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * fix: add ROUTER_LATE to rebroadcast integrity checks (#9816) Adds ROUTER_LATE and CLIENT_BASE to preferred rebroadcaster check (skip unsolicited NodeInfo) and prevents ROUTER_LATE from setting rebroadcast mode to NONE, which would silently break relaying. * Add explicit dependency on mklittlefs. (#9708) This fixes builds in very clean environment with default build target (e.g. -t buildfs *not* explicitly specified). Tested: pio run -e heltec-v3 Fixes #9035 Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * More RAK6421 work (#9813) * Add Portduino Enable pins * Add hat plus custom fields * Punt on the GPIO device detection for now * Simplify TX_GAIN_LORA for RAK13302 --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Don't double-blink Thinknode-M1 Power LED while charging (#9829) * Don't double-blink Thinknode-M1 Power LED while charging * Drop Double Define * chore(deps): update docker/metadata-action action to v6 (#9833) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update docker/build-push-action action to v7 (#9832) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update docker/setup-buildx-action action to v4 (#9824) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Cardputer Kit (#9540) * Cardputer Kit BMI270 WIP * BMI270 support * verify that the number of bytes read matches the requested length Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * trunk'd * remove excessive logging * Kick the screen when unsleeping * Update the st7789 library, and enable displayon and displayoff * Battery detection * Default to arrow keys and enter, while in menus. * Enable Backlight control * Update src/detect/ScanI2CTwoWire.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * updateState method now accepts shouldRequestFocus parameter for better maintainability --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * fix(t1000e): reclassify P0.04 as sensor power enable GPIO (#9826) P0.04 is a digital power-enable pin for the NTC/LUX sensors, not an ADC input. The old code was calling analogRead() on a floating GPIO that happened to read ~mid-rail, coincidentally producing reasonable temperature values. - Rename T1000X_VCC_PIN to T1000X_SENSOR_EN_PIN and drive it HIGH in initVariant() for both T1000-E and T1000-S variants - Read BATTERY_PIN (with ADC_MULTIPLIER) instead, clamped to the 3.0V LDO output (NTC_REF_VCC) for the NTC resistance calculation * Upgrade trunk (#9835) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Update Heltec Tracker v2 to version KCT8103L. (#9822) * Update Heltec Tracker v2 to version KCT8103L. * Fixed the issue of inaccurate comments. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * PPA: Remove Ubuntu 25.04, Add 26.04 (#9789) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * InkHUD: Nodelist cleanup (#9737) * Nodelist cleanup * Trunk fix * getTextWidth cleanup Updated the lambda to cache width in textW and reuse it instead of repeatedly calling getTextWidth(text) for unchanged text. * Putting back hopAway ==0 condition as mentioned relayed signal is missleading --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Fix WisMesh Tap V2 env mess (#9734) * Fix environment mess with wismesh tap v2 * Address feedback * Fix nRF52 AsyncUDP multicast TX/RX race condition causing garbled packets (#9765) socketSendUDP() calls yield() while waiting for SEND_OK, allowing the cooperative scheduler to run AsyncUDP::runOnce(). When runOnce() calls parsePacket() on the same socket during an active send, the multicast loopback packet arriving from the switch produces a garbled 8-byte RX header (wrong source IP, wrong payload length), leading to protobuf decode errors in UdpMulticastHandler. Add a volatile isSending flag that writeTo() sets around endPacket() (the only yield point). runOnce() checks this flag and skips parsePacket() while a send is in progress. Loopback packets stay buffered in the W5100S RX buffer and are read cleanly on the next poll cycle. Also propagate writeTo() return value in UdpMulticastHandler::onSend() instead of unconditionally returning true. Made-with: Cursor Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Add json file rotation option (#9783) Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Add APIPort to native config (#9840) * chore(deps): update neopixel to v1.15.4 (#9839) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * chore(deps): update meshtastic-esp32_https_server digest to b78f12c (#9851) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Add convenience userpref for disabling lora during development and testing * Debian: Extend sourcedeb cache expiration (#9858) Addendum to PR #9791 The sourcedebs cannot currently be built offline >30 days after release. Extend the cache-expiry-mangling hack to sourcedeb packaging. * G…

renovate Bot added the dependencies Pull requests that update a dependency file label Feb 12, 2026

renovate Bot changed the title ~~chore(deps): update neopixel to v1.15.4~~ Update NeoPixel to v1.15.4 Feb 12, 2026

chore(deps): update neopixel to v1.15.4

4c6a097

renovate Bot changed the title ~~Update NeoPixel to v1.15.4~~ chore(deps): update neopixel to v1.15.4 Feb 12, 2026

renovate Bot force-pushed the renovate/neopixel-1.x branch from 4b6623d to 4c6a097 Compare February 12, 2026 12:00

thebentern merged commit bcc2470 into master Feb 12, 2026
27 of 66 checks passed

caveman99 deleted the renovate/neopixel-1.x branch February 12, 2026 12:23

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Uh oh!

Uh oh!

chore(deps): update neopixel to v1.15.4#9616

chore(deps): update neopixel to v1.15.4#9616
thebentern merged 1 commit into
masterfrom
renovate/neopixel-1.x

renovate Bot commented Feb 12, 2026

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant

Uh oh!

Uh oh!

Conversation

renovate Bot commented Feb 12, 2026

Configuration

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

1 participant