DEBUG | 20:06:45 161 [Power] Battery: usbPower=1, isCharging=1, batMv=4284, batPct=100
DEBUG | 20:06:56 172 To Radio onwrite
DEBUG | 20:06:56 172 New ToRadio packet
DEBUG | 20:06:56 172 PACKET FROM PHONE (id=0xd832b95f fr=0x00000000 to=0x43b78eb0, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 WANTRESP priority=70)
DEBUG | 20:06:56 172 Enqueued local (id=0xd832b95f fr=0x00000000 to=0x43b78eb0, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 WANTRESP rxtime=1763410016 priority=70)
DEBUG | 20:06:56 172 [Router] Add packet record fr=0x0, id=0xd832b95f
DEBUG | 20:06:56 172 [Router] handleReceived(REMOTE) (id=0xd832b95f fr=0x00000000 to=0x43b78eb0, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 WANTRESP rxtime=1763410016 priority=70)
DEBUG | 20:06:56 172 [Router] Module 'Admin' wantsPacket=1
INFO  | 20:06:56 172 [Router] Received Admin from=0x0, id=0xd832b95f, portnum=6, payloadlen=14
INFO  | 20:06:56 172 [Router] Handle admin payload 16
INFO  | 20:06:56 172 [Router] Client got device connection status

assert failed: static NimBLEClient* NimBLEDevice::getClientByID(uint16_t) NimBLEDevice.cpp:307 (0)


Backtrace: 0x40377b3e:0x3fceaf20 0x40380fb5:0x3fceaf40 0x40387715:0x3fceaf60 0x4203e374:0x3fceb090 0x42059476:0x3fceb0f0 0x4205270e:0x3fcebb30 0x4206316c:0x3fcebd50 0x420634ce:0x3fcebdb0 0x4206907a:0x3fcebdd0 0x42071b2a:0x3fcebdf0 0x42067485:0x3fcebe10 0x42019f79:0x3fcebe50




ELF file SHA256: e22e7eb3ad911576

E (14416) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
Rebooting...
x�øESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0xc (RTC_SW_CPU_RST),boot:0x9 (SPI_FAST_FLASH_BOOT)
Saved PC:0x421435fe
SPIWP:0xee
mode:DIO, clock div:1
load:0x3fce3808,len:0x4bc
load:0x403c9700,len:0xbd8
load:0x403cc700,len:0x2a0c
entry 0x403c98d0
E (353) esp_core_dump_flash: No core dump partition found!
E (354) esp_core_dump_flash: No core dump partition found!
��@�INFO  | ??:??:?? 0 

//\ E S H T /\ S T / C

INFO  | ??:??:?? 0 Booted, wake cause 0 (boot count 1), reset_reason=reset
DEBUG | ??:??:?? 0 Filesystem files (20480/1048576 Bytes):
DEBUG | ??:??:?? 0  /prefs/channels.proto (57 Bytes)
DEBUG | ??:??:?? 0  /prefs/config.proto (170 Bytes)
DEBUG | ??:??:?? 0  /prefs/device.proto (121 Bytes)
DEBUG | ??:??:?? 0  /prefs/module.proto (93 Bytes)
DEBUG | ??:??:?? 0  /prefs/nodes.proto (579 Bytes)
[   455][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=41 scl=42 freq=100000
[   469][I][esp32-hal-i2c.c:75] i2cInit(): Initialising I2C Master: sda=17 scl=18 freq=100000
DEBUG | ??:??:?? 0 Power::lipoInit lipo sensor is not ready yet
DEBUG | ??:??:?? 0 Use analog input 1 for battery level
INFO  | ??:??:?? 0 ADC config based on Two Point values and fitting curve coefficients stored in eFuse
INFO  | ??:??:?? 0 Scan for i2c devices
[   503][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 0 Scan for I2C devices on port 2
[   528][W][Wire.cpp:301] begin(): Bus already started in Master Mode.
DEBUG | ??:??:?? 0 Scan for I2C devices on port 1
DEBUG | ??:??:?? 0 0x2 subtype probed in 2 tries 
INFO  | ??:??:?? 0 1 I2C devices found
DEBUG | ??:??:?? 0 acc_info = 0
INFO  | ??:??:?? 0 S:B:43,2.6.11.60ec05e
INFO  | ??:??:?? 0 Build timestamp: 1749660961
DEBUG | ??:??:?? 0 Total heap: 294656
DEBUG | ??:??:?? 0 Free heap: 257340
DEBUG | ??:??:?? 0 Total PSRAM: 0
DEBUG | ??:??:?? 0 Free PSRAM: 0
DEBUG | ??:??:?? 0 NVS: UsedEntries 98, FreeEntries 532, AllEntries 630, NameSpaces 5
DEBUG | ??:??:?? 0 Setup Preferences in Flash Storage
DEBUG | ??:??:?? 0 Number of Device Reboots: 77
INFO  | ??:??:?? 0 BLE OTA firmware version 0.3.0.87f0f2f
INFO  | ??:??:?? 0 No WiFi OTA firmware available
INFO  | ??:??:?? 0 Init NodeDB
[   623][E][vfs_api.cpp:105] open(): /littlefs/static/static does not exist, no permits for creation
[   641][E][vfs_api.cpp:105] open(): /littlefs/prefs/db.proto does not exist, no permits for creation
INFO  | ??:??:?? 0 Load /prefs/nodes.proto
INFO  | ??:??:?? 0 Loaded /prefs/nodes.proto successfully
INFO  | ??:??:?? 0 Loaded saved nodedatabase version 24, with nodes count: 2
INFO  | ??:??:?? 0 Load /prefs/device.proto
INFO  | ??:??:?? 0 Loaded /prefs/device.proto successfully
INFO  | ??:??:?? 0 Loaded saved devicestate version 24
INFO  | ??:??:?? 0 Load /prefs/config.proto
INFO  | ??:??:?? 0 Loaded /prefs/config.proto successfully
INFO  | ??:??:?? 0 Loaded saved config version 24
INFO  | ??:??:?? 0 Load /prefs/module.proto
INFO  | ??:??:?? 0 Loaded /prefs/module.proto successfully
INFO  | ??:??:?? 0 Loaded saved moduleConfig version 24
INFO  | ??:??:?? 0 Load /prefs/channels.proto
INFO  | ??:??:?? 0 Loaded /prefs/channels.proto successfully
INFO  | ??:??:?? 0 Loaded saved channelFile version 24
[   769][E][vfs_api.cpp:105] open(): /littlefs/prefs/uiconfig.proto does not exist, no permits for creation
ERROR | ??:??:?? 0 Could not open / read /prefs/uiconfig.proto
DEBUG | ??:??:?? 0 cleanupMeshDB purged 0 entries
DEBUG | ??:??:?? 0 Use nodenum 0x43b78eb0 
DEBUG | ??:??:?? 0 Number of Device Reboots: 77
DEBUG | ??:??:?? 0 Expand short PSK #1
INFO  | ??:??:?? 0 Wanted region 1, using US
DEBUG | ??:??:?? 0 Coerce telemetry to min of 30 minutes on defaults
DEBUG | ??:??:?? 0 Save to disk 4
DEBUG | ??:??:?? 0 Opening /prefs/device.proto, fullAtomic=1
INFO  | ??:??:?? 0 Save /prefs/device.proto
DEBUG | ??:??:?? 0 Use GPIO00 for button
DEBUG | ??:??:?? 0 SPI.begin(SCK=9, MISO=11, MOSI=10, NSS=8)
DEBUG | ??:??:?? 0 Use compiled/slipstreamed tzplaceholder                                         
DEBUG | ??:??:?? 0 Set Timezone to GMT0
DEBUG | ??:??:?? 0 Read RTC time as 1763410017
DEBUG | ??:??:?? 0 Start multicast thread
DEBUG | ??:??:?? 0 NeighborInfoModule is disabled
DEBUG | ??:??:?? 0 Rescan for I2C keyboard
DEBUG | ??:??:?? 0 Scan for I2C devices on port 2
DEBUG | ??:??:?? 1 Scan address 0x1f
DEBUG | ??:??:?? 1 Scan address 0x34
DEBUG | ??:??:?? 1 Scan address 0x55
DEBUG | ??:??:?? 1 Scan address 0x5a
DEBUG | ??:??:?? 1 Scan address 0x5f
DEBUG | ??:??:?? 1 Scan for I2C devices on port 1
DEBUG | ??:??:?? 1 Scan address 0x1f
DEBUG | ??:??:?? 1 Scan address 0x34
DEBUG | ??:??:?? 1 Scan address 0x55
DEBUG | ??:??:?? 1 Scan address 0x5a
DEBUG | ??:??:?? 1 Scan address 0x5f
INFO  | ??:??:?? 1 External Notification Module Disabled
INFO  | ??:??:?? 1 Turn on screen
DEBUG | ??:??:?? 1 haveGlyphs=1
DEBUG | ??:??:?? 1 waypoint wants a UI Frame
DEBUG | ??:??:?? 1 canned wants a UI Frame
DEBUG | ??:??:?? 1 SX126xInterface(cs=8, irq=14, rst=12, busy=13)
DEBUG | ??:??:?? 1 SX126X_DIO3_TCXO_VOLTAGE defined, using DIO3 as TCXO reference voltage at 1.800000 V
INFO  | ??:??:?? 1 Start meshradio init
INFO  | ??:??:?? 1 Radio freq=906.875, config.lora.frequency_offset=0.000
INFO  | ??:??:?? 1 Set radio: region=US, name=LongFast, config=0, ch=19, power=30
INFO  | ??:??:?? 1 myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 MHz)
INFO  | ??:??:?? 1 numChannels: 104 x 250.000kHz
INFO  | ??:??:?? 1 channel_num: 20
INFO  | ??:??:?? 1 frequency: 906.875000
INFO  | ??:??:?? 1 Slot time: 28 msec
INFO  | ??:??:?? 1 Final Tx power: 30 dBm
INFO  | ??:??:?? 1 SX126x init result 0
INFO  | ??:??:?? 1 Frequency set to 906.875000
INFO  | ??:??:?? 1 Bandwidth set to 250.000000
INFO  | ??:??:?? 1 Power output set to 22
DEBUG | ??:??:?? 1 Current limit set to 140.000000
DEBUG | ??:??:?? 1 Current limit set result 0
DEBUG | ??:??:?? 1 Set DIO2 as RF switch, result: 0
DEBUG | ??:??:?? 1 SX126X_RXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 1 SX126X_TXEN not defined, defaulting to RADIOLIB_NC
DEBUG | ??:??:?? 1 Use MCU pin -1 as RXEN and pin -1 as TXEN to control RF switching
INFO  | ??:??:?? 1 Set RX gain to boosted mode; result: 0
INFO  | ??:??:?? 1 SX1262 init success
INFO  | ??:??:?? 1 Not using WIFI
DEBUG | ??:??:?? 1 LoRA bitrate = 118.394310 bytes / sec
INFO  | ??:??:?? 1 PowerFSM init, USB power=1
DEBUG | ??:??:?? 1 State: BOOT
[  1328][D][esp32-hal-cpu.c:244] setCpuFrequencyMhz(): PLL: 480 / 6 = 80 Mhz, APB: 80000000 Hz
DEBUG | ??:??:?? 1 Free heap  :  192824 bytes
DEBUG | ??:??:?? 1 Free PSRAM :       0 bytes
DEBUG | ??:??:?? 1 [Power] Battery: usbPower=1, isCharging=1, batMv=4326, batPct=100
DEBUG | ??:??:?? 1 [Screen] Screen: Started...
DEBUG | ??:??:?? 1 [Screen] haveGlyphs=1
INFO  | ??:??:?? 1 [RangeTest] Range Test Module - Disabled
DEBUG | ??:??:?? 2 [Screen] haveGlyphs=1
DEBUG | ??:??:?? 3 [Screen] haveGlyphs=1
DEBUG | ??:??:?? 4 [Screen] haveGlyphs=1
INFO  | ??:??:?? 4 [PowerFSM] Init the NimBLE bluetooth module
DEBUG | ??:??:?? 4 [Screen] haveGlyphs=1
INFO  | ??:??:?? 5 BLE authentication complete
DEBUG | ??:??:?? 5 BluetoothStatus CONNECTED
DEBUG | ??:??:?? 5 [Screen] haveGlyphs=1
DEBUG | ??:??:?? 5 To Radio onwrite
DEBUG | ??:??:?? 5 New ToRadio packet
INFO  | ??:??:?? 5 Client wants config, nonce=69420
DEBUG | ??:??:?? 5 Got 5 files in manifest
INFO  | ??:??:?? 5 Start API client config
DEBUG | ??:??:?? 6 FromRadio=STATE_SEND_MY_INFO
INFO  | ??:??:?? 6 getFromRadio=STATE_SEND_UIDATA
DEBUG | ??:??:?? 6 Send My NodeInfo
DEBUG | ??:??:?? 6 Send device metadata
INFO  | ??:??:?? 6 [Screen] Done with boot screen
DEBUG | ??:??:?? 6 [Screen] Show standard frames
DEBUG | ??:??:?? 6 [Screen] Show 0 module frames
DEBUG | ??:??:?? 6 [Screen] Total frame count: 203
DEBUG | ??:??:?? 6 [Screen] Added modules.  numframes: 0
DEBUG | ??:??:?? 6 [Screen] Finished build frames. numframes: 3
DEBUG | ??:??:?? 7 Send channels 8
DEBUG | ??:??:?? 7 Send config: device
DEBUG | ??:??:?? 7 Send config: position
DEBUG | ??:??:?? 7 Send config: power
DEBUG | ??:??:?? 7 Send config: network
DEBUG | ??:??:?? 7 Send config: display
DEBUG | ??:??:?? 7 Send config: lora
DEBUG | ??:??:?? 7 Send config: bluetooth
DEBUG | ??:??:?? 7 Send config: security
DEBUG | ??:??:?? 8 Send config: sessionkey
DEBUG | ??:??:?? 8 Send module config: mqtt
DEBUG | ??:??:?? 8 Send module config: serial
DEBUG | ??:??:?? 8 Send module config: ext notification
DEBUG | ??:??:?? 8 Send module config: store forward
DEBUG | ??:??:?? 8 Send module config: range test
DEBUG | ??:??:?? 8 Send module config: telemetry
DEBUG | ??:??:?? 8 Send module config: canned message
DEBUG | ??:??:?? 8 Send module config: audio
DEBUG | ??:??:?? 8 Send module config: remote hardware
DEBUG | ??:??:?? 9 Send module config: neighbor info
DEBUG | ??:??:?? 9 Send module config: ambient lighting
DEBUG | ??:??:?? 9 Send module config: detection sensor
DEBUG | ??:??:?? 9 Send module config: paxcounter
DEBUG | ??:??:?? 9 FromRadio=STATE_SEND_FILEMANIFEST
DEBUG | ??:??:?? 9 File: /prefs/channels.proto (57) bytes
DEBUG | ??:??:?? 9 [Screen] FromRadio=STATE_SEND_FILEMANIFEST
DEBUG | ??:??:?? 9 File: /prefs/config.proto (170) bytes
DEBUG | ??:??:?? 9 FromRadio=STATE_SEND_FILEMANIFEST
DEBUG | ??:??:?? 9 File: /prefs/device.proto (121) bytes
DEBUG | ??:??:?? 9 FromRadio=STATE_SEND_FILEMANIFEST
DEBUG | ??:??:?? 9 File: /prefs/module.proto (93) bytes
DEBUG | ??:??:?? 9 FromRadio=STATE_SEND_FILEMANIFEST
DEBUG | ??:??:?? 9 File: /prefs/nodes.proto (579) bytes
DEBUG | ??:??:?? 9 FromRadio=STATE_SEND_FILEMANIFEST
INFO  | ??:??:?? 9 Config Send Complete
DEBUG | ??:??:?? 10 FromRadio=STATE_SEND_PACKETS
DEBUG | ??:??:?? 10 To Radio onwrite
DEBUG | ??:??:?? 10 New ToRadio packet
DEBUG | ??:??:?? 10 Got client heartbeat
DEBUG | ??:??:?? 10 To Radio onwrite
DEBUG | ??:??:?? 10 New ToRadio packet
INFO  | ??:??:?? 10 Client wants config, nonce=69421
INFO  | ??:??:?? 10 Client only wants node info, skipping other config
DEBUG | ??:??:?? 10 Got 5 files in manifest
INFO  | ??:??:?? 10 Start API client config
DEBUG | ??:??:?? 10 Send My NodeInfo
DEBUG | ??:??:?? 10 Send known nodes
INFO  | ??:??:?? 10 nodeinfo: num=0x43b7424c, lastseen=0, id=!43b7424c, name=fabzone424c
DEBUG | ??:??:?? 10 Send known nodes
DEBUG | ??:??:?? 10 Done sending nodeinfo
DEBUG | ??:??:?? 10 FromRadio=STATE_SEND_FILEMANIFEST
INFO  | ??:??:?? 10 Config Send Complete
DEBUG | ??:??:?? 11 To Radio onwrite
DEBUG | ??:??:?? 11 New ToRadio packet
DEBUG | ??:??:?? 11 PACKET FROM PHONE (id=0xd832b961 fr=0x00000000 to=0x43b78eb0, WantAck=0, HopLim=3 Ch=0x0 Portnum=65 priority=10)
DEBUG | ??:??:?? 11 [SerialConsole] Enqueued local (id=0xd832b961 fr=0x00000000 to=0x43b78eb0, WantAck=0, HopLim=3 Ch=0x0 Portnum=65 priority=10)
DEBUG | ??:??:?? 11 [Router] Add packet record fr=0x0, id=0xd832b961
DEBUG | ??:??:?? 11 [Router] handleReceived(REMOTE) (id=0xd832b961 fr=0x00000000 to=0x43b78eb0, WantAck=0, HopLim=3 Ch=0x0 Portnum=65 priority=10)
DEBUG | ??:??:?? 11 [Router] Module 'StoreForward' wantsPacket=1
DEBUG | ??:??:?? 11 [Router] Module 'StoreForward' considered
DEBUG | ??:??:?? 11 [Router] Module 'routing' wantsPacket=1
INFO  | ??:??:?? 11 [Router] Received routing from=0x0, id=0xd832b961, portnum=65, payloadlen=9
DEBUG | ??:??:?? 11 [Router] Routing sniffing (id=0xd832b961 fr=0x00000000 to=0x43b78eb0, WantAck=0, HopLim=3 Ch=0x0 Portnum=65 priority=10)
DEBUG | ??:??:?? 11 [Router] Module 'routing' considered
DEBUG | ??:??:?? 11 FromRadio=STATE_SEND_PACKETS
INFO  | ??:??:?? 11 Tell client we have new packets 2
DEBUG | ??:??:?? 11 BLE notify fromNum
DEBUG | ??:??:?? 11 To Radio onwrite
DEBUG | ??:??:?? 11 New ToRadio packet
DEBUG | ??:??:?? 11 PACKET FROM PHONE (id=0xd832b962 fr=0x00000000 to=0x43b78eb0, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 11 Enqueued local (id=0xd832b962 fr=0x00000000 to=0x43b78eb0, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 11 [Router] Add packet record fr=0x0, id=0xd832b962
DEBUG | ??:??:?? 11 [Router] handleReceived(REMOTE) (id=0xd832b962 fr=0x00000000 to=0x43b78eb0, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | ??:??:?? 11 [Router] Module 'Admin' wantsPacket=1
INFO  | ??:??:?? 11 [Router] Received Admin from=0x0, id=0xd832b962, portnum=6, payloadlen=17
INFO  | ??:??:?? 11 [Router] Handle admin payload 43
INFO  | ??:??:?? 11 [Router] Client received set_time_only command
DEBUG | ??:??:?? 11 [Router] Upgrade time to quality NTP
DEBUG | 20:07:08 11 [Router] Read RTC time as 1763410028
DEBUG | 20:07:08 11 [Router] Module 'Admin' considered
DEBUG | 20:07:08 11 [Router] FromRadio=STATE_SEND_PACKETS
DEBUG | 20:07:08 11 [Router] Module 'routing' wantsPacket=1
INFO  | 20:07:08 11 [Router] Received routing from=0x0, id=0xd832b962, portnum=6, payloadlen=17
DEBUG | 20:07:08 11 [Router] Routing sniffing (id=0xd832b962 fr=0x00000000 to=0x43b78eb0, WantAck=1, HopLim=3 Ch=0x0 Portnum=6 priority=70)
DEBUG | 20:07:08 11 [Router] Initial packet id 287716780
DEBUG | 20:07:08 11 [Router] Partially randomized packet id 3101658541
DEBUG | 20:07:08 11 [Router] Enqueued local (id=0xb8df8dad fr=0x43b78eb0 to=0x43b78eb0, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d832b962 rxtime=1763410028 priority=120)
DEBUG | 20:07:08 11 [Router] Module 'routing' considered
DEBUG | 20:07:08 11 [Router] Rx someone rebroadcasting for us (id=0xb8df8dad fr=0x43b78eb0 to=0x43b78eb0, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d832b962 rxtime=1763410028 priorit
DEBUG | 20:07:08 11 [Router] Didn't find pending packet
DEBUG | 20:07:08 11 [Router] Add packet record fr=0x43b78eb0, id=0xb8df8dad
DEBUG | 20:07:08 11 [Router] handleReceived(REMOTE) (id=0xb8df8dad fr=0x43b78eb0 to=0x43b78eb0, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d832b962 rxtime=1763410028 priority=120)
DEBUG | 20:07:08 11 [Router] Module 'routing' wantsPacket=1
INFO  | 20:07:08 11 [Router] Received routing from=0x43b78eb0, id=0xb8df8dad, portnum=5, payloadlen=2
DEBUG | 20:07:08 11 [Router] Routing sniffing (id=0xb8df8dad fr=0x43b78eb0 to=0x43b78eb0, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d832b962 rxtime=1763410028 priority=120)
DEBUG | 20:07:08 11 [Router] Received a ACK for 0xd832b962, stopping retransmissions
DEBUG | 20:07:08 11 [Router] Delivering rx packet (id=0xb8df8dad fr=0x43b78eb0 to=0x43b78eb0, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d832b962 rxtime=1763410028 priority=120)
DEBUG | 20:07:08 11 [Router] Update DB node 0x43b78eb0, rx_time=1763410028
DEBUG | 20:07:08 11 [Router] Forwarding to phone (id=0xb8df8dad fr=0x43b78eb0 to=0x43b78eb0, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d832b962 rxtime=1763410028 priority=120)
DEBUG | 20:07:08 11 [Router] Module 'routing' considered
INFO  | 20:07:08 11 Tell client we have new packets 4
DEBUG | 20:07:08 11 BLE notify fromNum
DEBUG | 20:07:08 11 FromRadio=STATE_SEND_PACKETS
DEBUG | 20:07:08 11 phone downloaded packet (id=0xb8df8dad fr=0x43b78eb0 to=0x43b78eb0, WantAck=0, HopLim=3 Ch=0x0 Portnum=5 requestId=d832b962 rxtime=1763410028 priority=120)