//\ E S H T /\ S T / C

�[0m �[32m INFO  �[0m| ??:??:?? 4 �[32m Booted, wake cause 0 (boot count 1), reset_reason=reset
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m Filesystem files (909312/1048576 Bytes):
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /prefs/channels.proto (57 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /prefs/config.proto (198 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /prefs/db.proto (595 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /prefs/module.proto (93 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/.gitkeep (0 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/Logo_Black.svg.gz (602 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/Logo_White.svg.gz (610 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/apple-touch-icon.png.gz (3164 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/favicon.ico.gz (2270 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/icon.svg.gz (852 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/index-b9vwykds.js.gz (222120 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/index-wV0rbIjU.css.gz (16573 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/index.html.gz (547 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/mapbox-gl-DY02hNYD.js.gz (391221 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/maplibre-gl-H6mDd47p.js.gz (210429 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/robots.txt.gz (42 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m  /static/site.webmanifest.gz (197 Bytes)
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m Power::lipoInit lipo sensor is not ready yet
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m Use analog input 1 for battery level
�[0m �[32m INFO  �[0m| ??:??:?? 4 �[32m ADC config based on Two Point values and fitting curve coefficients stored in eFuse
�[0m �[32m INFO  �[0m| ??:??:?? 4 �[32m Scan for i2c devices...
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m Scan for I2C devices on port 2
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m Scan for I2C devices on port 1
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m I2C device found at address 0x3c
�[0m �[32m INFO  �[0m| ??:??:?? 4 �[32m ssd1306 display found
�[0m �[32m INFO  �[0m| ??:??:?? 4 �[32m ssd1306 display found
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m 0x4 subtype probed in 2 tries 
�[0m �[32m INFO  �[0m| ??:??:?? 4 �[32m 1 I2C devices found
�[0m �[34m DEBUG �[0m| ??:??:?? 4 �[34m acc_info = 0
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m No SD_MMC card detected
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m S:B:16,2.5.11.8e2a3e5
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Build timestamp: 1730808735
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m Total heap: 278272
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m Free heap: 234916
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m Total PSRAM: 2095103
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m Free PSRAM: 2095103
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m NVS: UsedEntries 94, FreeEntries 536, AllEntries 630, NameSpaces 4
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m Setup Preferences in Flash Storage
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m Number of Device Reboots: 17
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m OTA firmware version 0.3.0.87f0f2f
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Init NodeDB
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Load /prefs/db.proto
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Loaded /prefs/db.proto successfully
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Loaded saved devicestate version 23, with nodecount: 2
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Load /prefs/config.proto
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Loaded /prefs/config.proto successfully
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Loaded saved config version 23
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Load /prefs/module.proto
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Loaded /prefs/module.proto successfully
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Loaded saved moduleConfig version 23
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Load /prefs/channels.proto
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Loaded /prefs/channels.proto successfully
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Loaded saved channelFile version 23
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m cleanupMeshDB purged 0 entries
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m Use nodenum 0xda585e94 
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m Number of Device Reboots: 17
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m Expand short PSK #1
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Wanted region 1, using US
�[0m �[34m DEBUG �[0m| ??:??:?? 5 �[34m Coerce telemetry to min of 30 minutes on defaults
�[0m �[32m INFO  �[0m| ??:??:?? 5 �[32m Save /prefs/db.proto
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Use GPIO00 for button
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m SPI.begin(SCK=5, MISO=3, MOSI=6, NSS=7)
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Use compiled/slipstreamed tzplaceholder                                         
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Set Timezone to GMT0
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Read RTC time as 1732414663
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m NeighborInfoModule is disabled
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Rescan for I2C keyboard
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Scan for I2C devices on port 2
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Scan address 0x1f
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Scan address 0x55
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Scan address 0x5a
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Scan address 0x5f
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Scan for I2C devices on port 1
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Scan address 0x1f
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Scan address 0x55
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Scan address 0x5a
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Scan address 0x5f
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Keyboard Type: 0x00 Model: 0x00 Address: 0x00
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m External Notification Module Disabled
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Turn on screen
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m haveGlyphs=1
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m waypoint wants a UI Frame
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m canned wants a UI Frame
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Audio wants a UI Frame
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m RF95Interface(cs=7, irq=9, rst=8, busy=33)
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Start meshradio init
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Radio freq=906.875, config.lora.frequency_offset=0.000
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Set radio: region=US, name=LongFast, config=0, ch=19, power=30
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 MHz)
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m numChannels: 104 x 250.000kHz
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m channel_num: 20
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m frequency: 906.875000
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Slot time: 77 msec
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Set radio: final power level=20
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m RF95 init result -2
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Frequency set to 906.875000
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Bandwidth set to 250.000000
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Power output set to 20
�[0m �[33m WARN  �[0m| ??:??:?? 6 �[33m No RF95 radio
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m SX126xInterface(cs=7, irq=33, rst=8, busy=34)
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m SX126X_DIO3_TCXO_VOLTAGE defined, using DIO3 as TCXO reference voltage at 1.800000 V
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Start meshradio init
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Radio freq=906.875, config.lora.frequency_offset=0.000
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Set radio: region=US, name=LongFast, config=0, ch=19, power=30
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m myRegion->freqStart -> myRegion->freqEnd: 902.000000 -> 928.000000 (26.000000 MHz)
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m numChannels: 104 x 250.000kHz
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m channel_num: 20
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m frequency: 906.875000
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Slot time: 77 msec
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Set radio: final power level=22
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m SX126x init result 0
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Frequency set to 906.875000
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Bandwidth set to 250.000000
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Power output set to 22
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Current limit set to 140.000000
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Current limit set result 0
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Set DIO2 as RF switch, result: 0
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m SX126X_RXEN not defined, defaulting to RADIOLIB_NC
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m SX126X_TXEN not defined, defaulting to RADIOLIB_NC
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m Use MCU pin -1 as RXEN and pin -1 as TXEN to control RF switching
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Set RX gain to boosted mode; result: 0
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m SX1262 init success
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m Not using WIFI
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m LoRA bitrate = 118.500000 bytes / sec
�[0m �[32m INFO  �[0m| ??:??:?? 6 �[32m PowerFSM init, USB power=1
�[0m �[34m DEBUG �[0m| ??:??:?? 6 �[34m State: BOOT
�[0m �[34m DEBUG �[0m| ??:??:?? 6 [Power] �[34m Battery: usbPower=1, isCharging=1, batMv=4416, batPct=100
�[0m �[34m DEBUG �[0m| ??:??:?? 6 [Screen] �[34m Screen: Started...
�[0m �[34m DEBUG �[0m| ??:??:?? 6 [Screen] �[34m haveGlyphs=1
�[0m �[34m DEBUG �[0m| ??:??:?? 6 [Paxcounter] �[34m Paxcounter starting up with interval of 3600 seconds
�[0m