Parts for v1 and v2 are not compatible!
- Easy to build. Great for soldering practice.
- Supports all cyrillic symbols in base layer.
- Compatible with most base-kit keycap sets. No 40s addons needed.
- Optional Panasonic EVQWGD001 or EC-11 encoder
- Plate also optional. You can build keyboard without a plate to reduce cost.
- Variable bottom-row with a 3u spacebars support.
- Customizable magnet panels
- VIAL/QMK/ZMK Firmware by aroum
- NEW! Hotswap PCB (untested, but should be fine). Hotswap PCB uses different diodes. Please check the BOM file at the end of this README file.
| Part | Quantity |
|---|---|
| Soroka PCB (HS) | 1 |
| RP2040-Zero (unsoldered pins) | 1 |
| Any MX Hotswap Sockets | 52 |
| BAT54C, SOT-23 Diodes | 27 |
| Panasonic EVQWGD001 (optional) or EC-11 Encoder | 1 |
| Part | Quantity |
|---|---|
| Soroka PCB (Soledered) | 1 |
| RP2040-Zero (unsoldered pins) | 1 |
| 1N4148w SOD-123 Diodes | 50 |
| Panasonic EVQWGD001 (optional) or EC-11 Encoder | 1 |
| Part | Quantity |
|---|---|
| Soroka PCB (Soldered or Hotswap) | 1 |
| Soroka Plate (Optional) | 1 |
| Soroka Case | 1 |
| Soroka Panel | 1 |
| Soroka Spacer | 1 |
| Oval feets 22x4x1.5mm | 4 |
| Silicone washers 2x5x1 | 9 |
| M2 x 4mm Screws | 13 |
| M2 Inserts 3mm (OD3.2) | 13 |
| Round magnets 3x1 mm | 8 |
In case of cover with screws, you don't need spacer and magnets, but you will need:
| Part | Quantity |
|---|---|
| M2 x 5 mm Screws | 8 |
| M2 Brass Standoffs Female-Female 11 mm | 4 |