mlxsw: reg: Extend MCIA register with new slot number field

vadimp-nvidia · kuba-moo · commit 89dd6fcd07f9 · 2022-04-12T09:51:38.000-07:00
Extend MCIA (Management Cable Info Access Register) with new field
specifying the slot number. The purpose of this field is to support
access to MCIA register for reading cage cable information on modular
system. For non-modular systems the 'module' number uniquely identifies
the transceiver location. For modular systems the transceivers are
identified by two indexes:
- 'slot_index', specifying the slot number, where line card is located;
- 'module', specifying cage transceiver within the line card.

Signed-off-by: Vadim Pasternak &lt;vadimp@nvidia.com&gt;
Reviewed-by: Jiri Pirko &lt;jiri@nvidia.com&gt;
Signed-off-by: Ido Schimmel &lt;idosch@nvidia.com&gt;
Signed-off-by: Jakub Kicinski &lt;kuba@kernel.org&gt;
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_env.c b/drivers/net/ethernet/mellanox/mlxsw/core_env.c
@@ -69,8 +69,8 @@ mlxsw_env_validate_cable_ident(struct mlxsw_core *core, int id, bool *qsfp,
 	if (err)
 		return err;
 
-	mlxsw_reg_mcia_pack(mcia_pl, id, 0, MLXSW_REG_MCIA_PAGE0_LO_OFF, 0, 1,
-			    MLXSW_REG_MCIA_I2C_ADDR_LOW);
+	mlxsw_reg_mcia_pack(mcia_pl, 0, id, 0, MLXSW_REG_MCIA_PAGE0_LO_OFF, 0,
+			    1, MLXSW_REG_MCIA_I2C_ADDR_LOW);
 	err = mlxsw_reg_query(core, MLXSW_REG(mcia), mcia_pl);
 	if (err)
 		return err;
@@ -145,7 +145,8 @@ mlxsw_env_query_module_eeprom(struct mlxsw_core *mlxsw_core, int module,
 		}
 	}
 
-	mlxsw_reg_mcia_pack(mcia_pl, module, 0, page, offset, size, i2c_addr);
+	mlxsw_reg_mcia_pack(mcia_pl, 0, module, 0, page, offset, size,
+			    i2c_addr);
 
 	err = mlxsw_reg_query(mlxsw_core, MLXSW_REG(mcia), mcia_pl);
 	if (err)
@@ -219,12 +220,12 @@ int mlxsw_env_module_temp_thresholds_get(struct mlxsw_core *core, int module,
 			page = MLXSW_REG_MCIA_TH_PAGE_CMIS_NUM;
 		else
 			page = MLXSW_REG_MCIA_TH_PAGE_NUM;
-		mlxsw_reg_mcia_pack(mcia_pl, module, 0, page,
+		mlxsw_reg_mcia_pack(mcia_pl, 0, module, 0, page,
 				    MLXSW_REG_MCIA_TH_PAGE_OFF + off,
 				    MLXSW_REG_MCIA_TH_ITEM_SIZE,
 				    MLXSW_REG_MCIA_I2C_ADDR_LOW);
 	} else {
-		mlxsw_reg_mcia_pack(mcia_pl, module, 0,
+		mlxsw_reg_mcia_pack(mcia_pl, 0, module, 0,
 				    MLXSW_REG_MCIA_PAGE0_LO,
 				    off, MLXSW_REG_MCIA_TH_ITEM_SIZE,
 				    MLXSW_REG_MCIA_I2C_ADDR_HIGH);
@@ -419,7 +420,7 @@ mlxsw_env_get_module_eeprom_by_page(struct mlxsw_core *mlxsw_core, u8 module,
 		size = min_t(u8, page->length - bytes_read,
 			     MLXSW_REG_MCIA_EEPROM_SIZE);
 
-		mlxsw_reg_mcia_pack(mcia_pl, module, 0, page->page,
+		mlxsw_reg_mcia_pack(mcia_pl, 0, module, 0, page->page,
 				    device_addr + bytes_read, size,
 				    page->i2c_address);
 		mlxsw_reg_mcia_bank_number_set(mcia_pl, page->bank);
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h
@@ -9978,6 +9978,12 @@ MLXSW_ITEM32(reg, mcia, l, 0x00, 31, 1);
  */
 MLXSW_ITEM32(reg, mcia, module, 0x00, 16, 8);
 
+/* reg_mcia_slot_index
+ * Slot index (0: Main board)
+ * Access: Index
+ */
+MLXSW_ITEM32(reg, mcia, slot, 0x00, 12, 4);
+
 enum {
 	MLXSW_REG_MCIA_STATUS_GOOD = 0,
 	/* No response from module's EEPROM. */
@@ -10077,11 +10083,13 @@ MLXSW_ITEM_BUF(reg, mcia, eeprom, 0x10, MLXSW_REG_MCIA_EEPROM_SIZE);
 				MLXSW_REG_MCIA_EEPROM_PAGE_LENGTH) / \
 				MLXSW_REG_MCIA_EEPROM_UP_PAGE_LENGTH + 1)
 
-static inline void mlxsw_reg_mcia_pack(char *payload, u8 module, u8 lock,
-				       u8 page_number, u16 device_addr,
-				       u8 size, u8 i2c_device_addr)
+static inline void mlxsw_reg_mcia_pack(char *payload, u8 slot_index, u8 module,
+				       u8 lock, u8 page_number,
+				       u16 device_addr, u8 size,
+				       u8 i2c_device_addr)
 {
 	MLXSW_REG_ZERO(mcia, payload);
+	mlxsw_reg_mcia_slot_set(payload, slot_index);
 	mlxsw_reg_mcia_module_set(payload, module);
 	mlxsw_reg_mcia_l_set(payload, lock);
 	mlxsw_reg_mcia_page_number_set(payload, page_number);
