**NerdOCTAXE-γ Rev3.4 **
Rev3.4:
- 6 Phase Buck Converter
- Added curcuit to read the internal temperature of each asic
The NerdOCTAXEγ runs with a modified version of the AxeOS: ESP-Miner-NerdQAxe+ (Releases for NerdOCTAXE-Gamma)
To flash the Lilygo T-Display you can use the Webflasher
DISCLAIMER: This device is an highly advanced build and partly WIP. To get 8 Asics and the voltage regulator soldered properly can be very hard and frustrating if you are not used to soldering Asics or soldering in general. Using that amount of power, this device isn't a toy and you should know what you are doing - stay safe! Also this device is not intended or designed to run overclocked.
PCB: For example with the JLC Plugin for Kicad you can export the files out of Kicad to order directly from JLCPCB or any other PCB-Manufacturer. I tested my prototype with 1oz on inner and outer layers... working nice :) If anyone is testing 2/1oz or 2/2oz please let me know of the results you are seeing!
BOM: You can directly upload the .csv in this repo to Digikey. You will have to order the Lilygo T-Display S3 and the XT60PW-M seperately
HEATSINKS: For this build I used two Thermalright AXP90-X53
ASICS: This board utilizes Bitmains BM1370-Series. I tested boards with the following variants: BM1370BC < BM1370PA < BM1370PF
If you like this project and want to support future work, feel free to donate to:
bc1q0ctaxeha3lpsaaz7kpjulflw2d9p66fhkp48dk
or related projects without which this project would not have been possible for me: