About Gigo HoverBots
PLEASE NOTE:
This app requires a HoverBots package, and a Bluetooth-supported mobile device to play with. ABOUT HoverBots: HoverBots is a balancing robot package. There are 6 models in this package. A special technology...
PLEASE NOTE:
This app requires a HoverBots package, and a Bluetooth-supported mobile device to play with. ABOUT HoverBots: HoverBots is a balancing robot package. There are 6 models in this package. A special technology keeps the robot models in this kit balanced. Download the app and experience balancing behavior by different operations. HOW TO PLAY: 1. Position the model with its wheels on a smooth floor in an open area. 2. Turn on the switch, hold the model upright until you feel the motors working. 3. Open the app on your device 4. Establish a Bluetooth connection between the app and the robotic base unit 5. There are three different modes, Remote control, Balance Settings, and Programming
Version History - the user can select whether or not to download-PID-to-HoverBot/save-PID-to-library when leaving Balance Setting screen. 1.1.5 12/13/2019 - GUI fine-tune on Remote Control, Balancing Settings and Programming Mode. - PID parameters will be downloaded to the chassis when leaving Balancing Settings - Safety mechanisms for some unreasonable conditions of program blocks in Programming Mode. 1.1.4 12/06/2019 - GUI improvement on Programming Mode 1.1.3 11/22/2019 - GUI improvement on Programming Mode 1.1.2 11/15/2019 - Bugfix on the issue of balancing crash in Balancing-Robot Programming Mode - Bugfix on the blank program-block at the runtime in Gyroscope-sensor Programming Mode - Bugfix on the audio delay/repeat in programming modes 1.1.1 11/08/2019 - Bug-fix on Balancing Programming Mode. - Bug-fix on Gyroscope-Sensor Programming Mode. - Bug-fix on Remote Control Mode. - GUI fine-tune on file name input dialog-box. - GUI fine-tune on Gyroscope-Sensor Programming Mode. 1.1.0 11/01/2019 - Bugfix on the balancing disabled when entered Balancing Robot Programming Mode - Bugfix on the motor spin of Gyroscope-Sensor Programming Mode - GUI optimization on Gyroscope-Sensor Programming Mode - Removed the redundant files 1.0.9 10/25/2019 - GUI improvement on the font size - Improvement on the security - Improvement on the compatibility on audio-playback - Improvement on the performance of PID parameter library page switching - Improvement on the model program management - Bugfix on model program running - Bugfix on the GUI of Programming Mode and RC Mode 1.0.8 10/18/2019 - bug-fix on PID parameter configuration sliders. - bug-fix on the BLE device rename - bug-fix on the program name input field screen transition - the threshold of the battery level indicator is changed - some other GUI fix 1.0.7 10/09/2019 - bug-fix on the program saving issue in Gyroscope Sensor Programming Mode - bug-fix on the lost PID parameter ID when reading the PID parameters from the chassis/toy - bug-fix on a potential issue when reading the PID value from the chassis/toy - give each model a throttle delay parameter - fine-tuned the throttle delay parameter on the Remote Control Mode 1.0.6 10/04/2019 - Bugfix on BT connectivity - Compatibility of iOS 13.1 - Compatibility of iPad Pro 1.0.5 09/28/2019 - Bug fix - Program name input. 1.0.4 09/21/2019 - Programming Mode works now. - Program Management works now. - The other bug-fix. 1.0.3 09/13/2019 - Programming Mode is available in this version - Some optimization and bug fix on the PID Mode - The Joystick sliding is improved in RC Mode 1.0.2 09/08/2019 - Optimized balancing parameters for the retail packages (PID values and angle offset) - Bug-fix on the balancing-crash in max. speed. 1.0.1 07/16/2019 1.0 07/11/2019
Previous Versions
Here you can find the changelog of Gigo HoverBots since it was posted on our website on 2023-09-07 17:38:15.
The latest version is 1.1.5 and it was updated on 2026-06-25 00:03:49. See below the changes in each version.
Gigo HoverBots version 1.1.5
Updated At: 2026-06-03
Changes: Version History - the user can select whether or not to download-PID-to-HoverBot/save-PID-to-library when leaving Balance Setting screen. 1.1.5 12/13/2019 - GUI fine-tune on Remote Control, Balancing Settings and Programming Mode.
- PID parameters will be downloaded to the chassis when leaving Balancing Settings
- Safety mechanisms for some unreasonable conditions of program blocks in Programming Mode. 1.1.4 12/06/2019 - GUI improvement on Programming Mode 1.1.3 11/22/2019 - GUI improvement on Programming Mode 1.1.2 11/15/2019 - Bugfix on the issue of balancing crash in Balancing-Robot Programming Mode
- Bugfix on the blank program-block at the runtime in Gyroscope-sensor Programming Mode
- Bugfix on the audio delay/repeat in programming modes 1.1.1 11/08/2019 - Bug-fix on Balancing Programming Mode.
- Bug-fix on Gyroscope-Sensor Programming Mode.
- Bug-fix on Remote Control Mode.
- GUI fine-tune on file name input dialog-box.
- GUI fine-tune on Gyroscope-Sensor Programming Mode. 1.1.0 11/01/2019 - Bugfix on the balancing disabled when entered Balancing Robot Programming Mode
- Bugfix on the motor spin of Gyroscope-Sensor Programming Mode
- GUI optimization on Gyroscope-Sensor Programming Mode
- Removed the redundant files 1.0.9 10/25/2019 - GUI improvement on the font size
- Improvement on the security
- Improvement on the compatibility on audio-playback
- Improvement on the performance of PID parameter library page switching
- Improvement on the model program management
- Bugfix on model program running
- Bugfix on the GUI of Programming Mode and RC Mode 1.0.8 10/18/2019 - bug-fix on PID parameter configuration sliders.
- bug-fix on the BLE device rename
- bug-fix on the program name input field screen transition
- the threshold of the battery level indicator is changed
- some other GUI fix 1.0.7 10/09/2019 - bug-fix on the program saving issue in Gyroscope Sensor Programming Mode
- bug-fix on the lost PID parameter ID when reading the PID parameters from the chassis/toy
- bug-fix on a potential issue when reading the PID value from the chassis/toy
- give each model a throttle delay parameter
- fine-tuned the throttle delay parameter on the Remote Control Mode 1.0.6 10/04/2019 - Bugfix on BT connectivity
- Compatibility of iOS 13.1
- Compatibility of iPad Pro 1.0.5 09/28/2019 - Bug fix
- Program name input. 1.0.4 09/21/2019 - Programming Mode works now.
- Program Management works now.
- The other bug-fix. 1.0.3 09/13/2019 - Programming Mode is available in this version
- Some optimization and bug fix on the PID Mode
- The Joystick sliding is improved in RC Mode 1.0.2 09/08/2019 - Optimized balancing parameters for the retail packages (PID values and angle offset)
- Bug-fix on the balancing-crash in max. speed. 1.0.1 07/16/2019 1.0 07/11/2019
Gigo HoverBots version 1.1.5
Updated At: 2019-12-13
Changes: Dec 13, 2019
Version 1.1.5
- the user can select whether or not to download-PID-to-HoverBot/save-PID-to-library when leaving Balance Setting screen.
Gigo HoverBots version 1.1.5
Updated At: 2019-12-13
Changes: - the user can select whether or not to download-PID-to-HoverBot/save-PID-to-library when leaving Balance Setting screen.
Disclaimer
Official App Store Link
We do not host Gigo HoverBots on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Gigo HoverBots is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
