Flight Ops 5.0.7 - App Store

---

About Flight Ops

Main functions: . Distance, flight time and estimated fuel used computation It will be based on the following parameters: - Mach number or TAS - ISA deviation - Distance factor to compensate great circle distance - Manual...

Main functions: . Distance, flight time and estimated fuel used computation It will be based on the following parameters: - Mach number or TAS - ISA deviation - Distance factor to compensate great circle distance - Manual Wind component (Flight Ops Standard) - Automatic Historical average wind component (Flight Ops Pro) . Aircraft Profiles You can easily create and manage your aircraft profiles, setting the following: - Fuel used depending on distance flown. It can be set for as many distance values as you wish. The more you indicate, the more accurate will be your result! Of course, it can be done for any Mach or TAS - Structural weight limitations - ACN/PCN values In a single tap, you can even share these profiles via Airdrop, email, WhatsApp, Wechat, Dropbox... An example of aircraft profile with full instructions is provided in the app . Alternate airports finder It’s based on the following parameters: - Distance from destination - Minimum runway length - Paved runways or not - Airports of entry or not - Including military airports or not They will be automatically sorted by ascending distance from destination airport . Plotting map On this map you can plot: - Great circle routes between airports - ETP circles based on a specific radius - By a long push on the map you can display all airports around, making easy and fast the selection of ETP airports. As for alternates search, this selection is based on same parameters (see above) . Airports database - You can search in the database and retrieve any airport(s) based on the following parameters: ICAO code, IATA code, airport name or city name - Database can be updated (Flight Ops Pro) . Fuel uplift module You can use your aircraft limitations or use the "Free mode". If you fly different birds, your aircrafts limitations can be stored in the database. Therefore, no need to remember the max fuel weight or volume nor your maximum ramp weight! Based on your aircraft limitations, you can easily compute the fuel quantity required. Just enter desired uplift fuel volume, fuel weight or your desired aircraft ramp weight and Flight Ops will compute other numbers at once! It considers all common units: - Weight: Lbs and Kg - Volume: Liters, US Gal, Imp Gal - Density: Kg/L, Kg/US Gal, Kg/Imp Gal, Lbs/L, Lbs/US Gal, Lbs/Imp Gal You cannot get the fuel density from the fueler? Now you can retrieve it from the fuel temperature and can even select the type of fuel (Jet or Gasoline). . ACN / PCN Based on a PCN number, Flight Ops will decode and display a full description. If you have at least 1 aircraft in your database, it will provide your limitation(s) if any: - Aircraft weight - Main Landing Gear tire pressure - Nose Landing gear tire pressure If you indicate your aircraft weight, Flight Ops will compute your ACN. Of course, all these ACN values can be set through your aircraft profiles. . SNOWTAM decoding (METAR format) Just make a copy paste of any SNOWTAM or simply use the wheel. You will then get: - Full decoding - Wind components based on the related runway . Weather and airports information - You can build your own favorite airports list to check weather status at a glance - For any airport, you can get the latest METAR and/or TAF (if available) - Based on current wind speed and direction, Flight Ops will display all runways with corresponding wind components . Distance calculator To calculate the distance and True bearing between 2 latitudes/longitudes waypoints. . Last Minute Change Based on the Weight & Balance Load Sheet computed for your flight, grab your iPhone/iPad and compute your Last Minute Change data if necessary. Indicate your new payload, adding or removing pax & cargo and update your fuel values if required. Flight Ops will then calculate revised weights and centers of gravity for ZFW, TOW and LDW. Terms of Use : https://www.apple.com/legal/internet-services/itunes/dev/stdeula/ Privacy Policy : https://www.flight-office.com/flightops.pdf

Version History Bug fixes General interface improvements 5.0.7 Apr 6 In-App Purchase : Unlock exclusive features by subscribing to Flight Ops Pro : · Get Historical average wind components for more accurate flight times, even offline. On Flight Planning module, just select AUTO for automatic historical average wind component or MAN to indicate a manual headwind or tailwind value · Keep your Airports database up to date Both versions, Standard & Pro : · Updated all countries flags, using Apple iOS library · App icon and logo have been re-designed · Performance improvements · Several bugs have been squashed, mostly related to airports data 5.0.5 08/18/2025 In-App Purchase : Unlock exclusive features by subscribing to Flight Ops Pro : · Get Historical average wind components for more accurate flight times, even offline. On Flight Planning module, just select AUTO for automatic historical average wind component or MAN to indicate a manual headwind or tailwind value · Keep your Airports database up to date Both versions, Standard & Pro : · Updated all countries flags, using Apple iOS library · App icon and logo have been re-designed · Performance improvements · Bug fixes 5.0.4 08/17/2025 In-App Purchase : Unlock exclusive features by subscribing to Flight Ops Pro : · Get Historical average wind components for more accurate flight times, even offline. On Flight Planning module, just select AUTO for automatic historical average wind component or MAN to indicate a manual headwind or tailwind value · Keep your Airports database up to date Both versions, Standard & Pro : · Updated all countries flags, using Apple iOS library · App icon and logo have been re-designed · Performance improvements · Bug fixes 5.0.3 08/16/2025 In-App Purchase : Unlock exclusive features by subscribing to Flight Ops Pro : · Get Historical average wind components for more accurate flight times, even offline. On Flight Planning module, just select AUTO for automatic historical average wind component or MAN to indicate a manual headwind or tailwind value · Keep your Airports database up to date   Both versions, Standard & Pro : · Updated all countries flags, using Apple iOS library · App icon and logo have been re-designed · Performance improvements · Bug fixes 5.0.2 08/16/2025 Updated countries flags, using Apple iOS library Updated app icon Performance improvements Bug fixes 4.9.2 07/30/2025 Updated countries flags, using Apple iOS library Updated app icon Performance improvements Bug fixes 4.9.1 07/29/2025 Updated countries flags, using Apple iOS library Updated app icon Performance improvements Bug fixes 4.9 07/28/2025 Bug fixes 4.8.2 07/25/2025 The bug preventing fetching weather data has been squashed 4.8.1 11/22/2023 Bug fixes and general improvements 4.8 11/08/2023 New module: Last Minute Change Based on the Weight & Balance Load Sheet computed for your flight, grab your iPhone/iPad and compute your Last Minute Change data if necessary. Indicate your new payload, adding or removing pax & cargo and update your fuel values if required. Flight Ops will then calculate revised weights and centers of gravity for ZFW, TOW and LDW. The Quick User Guide has been updated with instructions, in order you could easily edit your aircraft profile with OEM data: http://www.flight-office.com/flightops.pdf 4.7.1 11/25/2020 New module: Last Minute Change Based on the Weight & Balance Load Sheet computed for your flight, grab your iPhone/iPad and compute your Last Minute Change data if necessary. Indicate your new payload, adding or removing pax & cargo and update your fuel values if required. Flight Ops will then calculate revised weights and centers of gravity for ZFW, TOW and LDW. The Quick User Guide has been updated with instructions, in order you could easily edit your aircraft profile with OEM data: http://www.flight-office.com/flightops.pdf 4.7 11/19/2020 Bug fixes and interface improvements 4.6 02/22/2020 New module : Speed vs Wind Comparing 2 Mach and related Fuel Flow data, check if you should fly faster facing some headwind component Bugs fixes and interface improvements 4.5 02/16/2020 • Many of you asked for it, here you go: There is a new module: Distance calculator Now you can calculate the great circle distance and bearing between 2 latitudes/longitudes waypoints. • Bug fixes and general improvements • Quick User Guide has been updated and is available there: http://www.flight-office.com/flightops.pdf 4.3 09/20/2018 New module: ACN/PCN • PCN Based on a PCN number, Flight Ops will decode and display a full description. If you have at least 1 aircraft in your database, it will provide your limitation(s) if any: - Aircraft weight - Main Landing Gear tire pressure - Nose Landing gear tire pressure • ACN Indicate your aircraft weight and Flight Ops will compute your ACN. Of course, all these ACN values can be set through your aircraft profiles. • A FAQ has been added. • Now you can organize your modules as you wish, selecting the 4 main modules you want as quick access. • Bug fixes and general improvements • Quick User Guide has been updated and is available there: http://www.flight-office.com/flightops.pdf 4.2.2 08/19/2018 New module! ACN / PCN Version 4.2.1: An intermediate weight has been added to get more accurate ACN values. Version 4.2: Based on a PCN number, Flight Ops will decode and display a full description. If you have at least 1 aircraft in your database, it will provide your limitation(s) if any: - Aircraft weight - Main Landing Gear tire pressure - Nose Landing gear tire pressure If you indicate your aircraft weight, Flight Ops will provide your ACN. Of course, all these ACN values can be set through your aircraft profiles. A FAQ has been added. Now you can organize your modules as you wish, selecting the 4 main modules you want as quick access. Bug fixes and general improvements Quick User Guide is available there: http://www.flight-office.com/flightops.pdf 4.2.1 08/16/2018 New module! ACN / PCN Based on a PCN number, Flight Ops will decode and display a full description. If you have at least 1 aircraft in your database, it will provide your limitation(s) if any: - Aircraft weight - Main Landing Gear tire pressure - Nose Landing gear tire pressure If you indicate your aircraft weight, Flight Ops will provide your ACN. Of course, all these ACN values can be set through your aircraft profiles. A FAQ has been added. Now you can organize your modules as you wish, selecting the 4 main modules you want as quick access. Bug fixes and general improvements Quick User Guide is available there: http://www.flight-office.com/flightops.pdf 4.2 08/16/2018 Bug fixes and general improvements Any question? Glance at the Quick user guide: http://www.flight-office.com/flightops.pdf 4.1 08/09/2018 Some bugs have been fixed: In Aircraft Profiles module, the example describing the way to create a new profile was missing. A bug prevented the weights figures to be automatically loaded when an aircraft was selected in Fuel Uplift module. Improvements: Now, in case you have several aircrafts in your app, you can directly swap to another aircraft from Flight Planning module. General improvements for the stability of the app. Help: Do not forget a quick user guide is available there: http://www.flight-office.com/flightops.pdf 4.0.1 08/06/2018 New feature!!! This request was on your top list, here you go: Now you can get the fuel used computation based on the distance provided in Flight Planning section! It could be done thanks to the new Aircraft profiles section. You can easily create and manage your aircraft profiles, setting the following: -Fuel used depending on distance flown. It can be set for as many distance values as you want. The more you indicate, the more accurate will be your result! -Of course it can be done for any Mach number or TAS -Structural weight limitations In a single click, you can even share these profiles via Airdrop, email, WhatsApp... An example of aircraft profile with full instructions is provided in the app General improvements to improve the stability and performance of the app 4.0 07/31/2018 Updated database Continued improvements to improve the stability and performance of the app 3.3 07/23/2018 3.2 Whatever the type of aircraft you fly, now you can either select a Mach number or a TAS in kt, km/h or MpH. Go to the settings of Flight time, in Flight Planning module. It could also be stored in aircraft database. General design and performance improvements. Bug fixes. 3.1 Refueling module: You can use your aircraft limitations or use the "free mode". If you fly different birds, your aircrafts limitations can now be stored in a local database. Therefore, no need to remember the max fuel weight or volume nor your maximum ramp weight! Based on your aircraft limitations, you can easily compute the fuel quantity required. Just enter desired uplift fuel volume, fuel weight or your desired aircraft ramp weight and Flight Ops will compute other numbers at once! It takes into account all common units: -Weight: Lbs and Kg -Volume: Liters, US Gal, Imp Gal -Density: Kg/L, Kg/US Gal, Kg/Imp Gal, Lbs/L, Lbs/US Gal, Lbs/Imp Gal You cannot get the fuel density from the fueler? No worries, now you can retrieve it from the fuel temperature and can even select the type of fuel (Jet or Gasoline). 3.2 11/17/2017 Bug fixes 3.1.1 11/12/2017

---

Previous Versions

Here you can find the changelog of Flight Ops since it was posted on our website on 2016-12-22 13:21:23. The latest version is 5.0.7 and it was updated on 2026-06-21 21:02:32. See below the changes in each version.

---

Related Apps

Here you can find apps that are similar with Flight Ops.

---

Disclaimer