Device Integration Request Form (v1.3)

Two paths to SmartgridOne compatibility.

1) Integrate our Eniris Generic Protocol

To integrate with Eniris, the preferred approach is for the manufacturer to integrate our Eniris Generic Protocol. This is also the most cost-effective solution for you. Detailed technical information can be found here: https://docs.eniris.be/en/Controller/Accessories/generic-protocol.

Please contact us at info@eniris.com if you wish to proceed with this trajectory; the integration support fee is €7,500.

2) We integrate your protocol

Alternatively, you can opt to have us integrate your protocol. Please note, however, that Eniris only accepts such requests if they hold clear commercial relevance.

This means that a recent order (placed within the last 60 days) with a minimum total value (sofware licenses and or hardware) of €15,000 entitles you to request one integration free of charge—without any guarantee of success. Eniris also reserves the right to decline the integration if it does not align with our current roadmap.

The integration will apply to one specific device type only; we do not commit to supporting the full product range of the submitted brand.

Any deviations from this policy will be charged at standard service rates and must be discussed in advance with our sales representative.

Regarding the integration of an external signal, please use the following form: smartgridone.com/externalsignalrequest

Please select what applies to you.

I'm a manufacturer looking to submit the Modbus registers for a device.

I'm an Eniris customer looking to submit the Modbus registers for a device.

I'm an Eniris customer with a feature request for smartgridOne

I'm an Eniris customer with a feature request for Eniris BMS

I am an Eniris customer requesting an additional integration for monitoring.

I'm an Eniris customer with a feature request for smartgridX

Please provide the invoice number for the controllers ordered from Eniris / SmartgridOne * If you do not have this information, kindly request it from the customer who purchased your systems. We will assess whether your order was placed within the last 60 days and whether it meets the minimum amount of €15,000.

Please fill in the form as completely as possible. New integrations will be considered for inclusion in our roadmap, which is publicly available at: https://eniris.io/roadmap

This form is made for manufacturers and suppliers.

If this form reaches you it means there was a request to add a device to our controller platform.

Please fill in the form as completely as possible. New integrations will be considered for inclusion in our roadmap, which is publicly available at: https://eniris.io/roadmap

Required Information for batteries

The absolute minimum we need to control batteries is the following:

Request:
- State of Charge (SoC)
- Out/in active power (ideally per phase and the total)

Commands:
- Charge/discharge command
- Amount of power/current (can also be combined with the above by looking at the sign)

Nice to have's are the following:

Request:
- Total amount of charged/discharged energy
- Battery capacity
- Battery/BMS/inverter model
- Max and min power
- Currents (ideally per phase)
- Voltages (per phase)

Requesting company name *

Phone number of requesting company *

Requesting company VAT *

Requesting company contact person * Please fill in the contact person of the requesting company.

Please provide the serial number of the EMS that is used for testing and connected to the test installation. *

Contactperson at Eniris *

Urgency and the reason for this urgency (including the number of systems currently depending on it). Please note that priority is determined based on the number of purchased EMS systems. *

Email *

SmartgridOne Feature description Please describe the desired functionality in detail.

SmartgridX Feature description Please describe the desired functionality in detail.

Monitoring Datastream Description Please describe the desired functionality in detail.

Are there any files you would like to share with us *

Choose File

Are there any files you would like to share with us (e.g., API documentation)? *

Choose File

Eniris BMS Feature description Please describe the desired functionality in detail.

Brand * Please fill in the brand of the device.

Model or applicable models * Please fill in the complete model names of the devices separated by a comma (',').

Additional information Here you can add additional information you want to share.

Please select a possible communication protocol. If both are applicable, the other can be defined in the additional information section. *

Modbus

API

OCPP

Would you like to monitor or control? *

Only monitoring (reading values is possible)

Only monitoring (reading & writing values is possible)

Monitoring & control is possible (power or current can in some way be manipulated)

Modbus register list

File Upload - Modbus register list

Choose File

Additional information Here you can add additional information you want to share.

Please explain how to physically connect the device to allow communication. Put the explanation here OR put a link to where it is explained and reference to the correct section. *

How to open up the communication to an external controller Please describe how an installer can open up the communication to an external controller (through the interface on the device, through an APP, through the push of a button,...)

Baud rate

Parity

Stopbit

Additional information Here you can add additional information you want to share.

OTP Verification

OTP Verification

Integration Request Form

Link to resume this form later:

Turn on the camera permission in your browser to continue further

Alert

Please fill all the required fields.

Integration Request Form​

Link to resume this form later:

Turn on the camera permission in your browser to continue further

Alert

Please fill all the required fields.

Integration Request Form