EMP Shield Portable for RV’s, Campers, Apartments, Camping, Travel, and Computers
• EMP Shield is Listed by the Department of Homeland Security.
• Next Generation EMP Protection With Military Certified Testing.
• Proudly Made in America, Veteran Owned Company.
• EMP Shield protects over $8 Billion in infrastructure, equipment, & vehicles. We have proudly manufactured over 250,000+ EMP Shield products since 2018 at our Kansas facilities.
Original price was: $449.00.$379.00Current price is: $379.00.
Economic Relief Sale! - Save up to 22% in your cart!
What Does EMP Shield Protect Against?
EMP Protection
All Phases of an EMP (E1, E2, E3)
Coronal Mass Ejection (CME) & Solar Flare
Up to 228,000 Amps
Lightning Protection
100% Lightning Guarantee Backed By a $25,000 Insurance Policy
Some Organizations We Work With
DHS
United States Department of Homeland Security
U.S. AIRFORCE
United States Airforce
FBI
Federal Bureau of Investigation
Featured In
EMP Shield Portable for RV’s, Campers, Apartments, Camping, Travel, and Computers
Original price was: $449.00.$379.00Current price is: $379.00.
Industry Leading 10 Year Warranty
If it fails at anytime during the 10 year limited lifetime warranty, we replace it for $50. No questions asked!
Backed by $25,000 of Insurance
If the device doesn’t protect your electronics, we will cover the damage
Surpasses All Military EMP Testing Standards
- MIL-STD-188-125-1
- MIL-STD-464C
- MIL-STD-461-G
- RS-105 (90,000 Volts)
Listed by the Department of Homeland Security
EMP Shield Has Set New Standards in EMP Protection and is Listed by Homeland Security in their EMP Resilience Report
One of the Worlds Fastest
Our Technology Begins Pulling Excess Electricity from Your Electrical System in Less Than a Nanosecond

14 Day Money Back Guarantee
If You Decide EMP Shield Isn’t For You, We Offer a 14 Day No Questions Asked Return Policy
Incredibly Powerful
The EMP Shield is Capable of Withstanding up to 228,000 AMPS per phase.
IP 66 Rated
For Use in Extreme Hot & Cold Climate Conditions. Extreme weather proven at Edison Testing Laboratories.
Easily Installs in 10 Minutes or Less
We have designed the EMP Shield to install easily for any application. All devices have an easy to follow installation guide.
Why Do I Need EMP Shield?
- The Government has released an EMP Executive order & Homeland Security is urging people to get prepared quickly!
- Although the grid may be down, your electrical equipment and home will still be functional if you have EMP Shield.
- EMP Shield will ensure your vehicle operates after an EMP helping you get home, save family members, or even get supplies while others cannot.
- Your home will be 100% protected from lightning saving you thousands of dollars and months of time if you are hit with lightning.
- If you have a solar system or generator, you will have power and functional equipment while others do not!
NEW! EMP Shield MICRO (Vehicle Protection) – LEARN MORE
EMP Shield is 100% American Made and Veteran Owned.
All of our products are made right here in Kansas, USA!
EMP Shield currently has over 70 Kansas employees and 3,000+ affiliates nation wide.
Industry Leading Products and Customer Service
No robots or AI. Give us a call and our sales team will be happy to assist!
How Has EMP Shield Been Tested?
Isn't a nuclear explosion required to create an EMP?
The threat of an EMP is the large amount of electricity that is induced into conductors that generate heat and can be destroyed. There are only a few testing facilities in the world capable of producing the same amount of electricity that an EMP produces.
EMP Shield has been designed to exceed the US Military requirements for protection against a high-altitude nuclear detonation that results in an electromagnetic pulse. This family of products has been tested to verify compliance with the following Military Standards:
MIL-STD-461-RS105 Transient electromagnetic pulse of up to 50 kV/m, double exponential wave with a rise time in the nanosecond range, that is applied to the equipment under test (EUT) at least 5 times. We tested at 50 kV/m and also 90 kV/m (80% above required testing voltage).
MIL-STD-188-125-1 High Altitude EMP
MIL-STD-461G Control of Electromagnetic Interference
MIL-STD-461-CS-115 The purpose of CS115 is to test an electronic or electrical system to withstand signals coupled onto the test unit’s associated cabling. The test unit will be subjected to rise and fall times, pulse width, and amplitude as specified on Figure CS115-1 at a 30 Hz rate for one minute;
MIL-STD-461-CS116 applies to 10 kHz to 100 MHz for all interconnecting cables, including power cables, and individual high side power leads;
MIL-STD-461 CS117 apples to all safety-critical equipment interconnecting cables and non-safety critical equipment with interconnecting cables/electrical interfaces that are part of or connected to equipment performing safety critical functions. The goal is to test the unit’s ability to withstand lightning transients coupled onto the test unit’s associated cables and power leads;
MIL-STD-464C Electromagnetic Environmental Effects Requirements for Systems.
Our test results show that we begin shunting the over-voltage condition in less than 1 nanosecond, and our units are designed to shunt over 100,000 Amps per phase. Our devices are scalable to any size.
*Keystone Compliance does not personally endorse any products
How Does EMP Shield Work?
EMP Shield will protect all the electronics and equipment connected to your electrical system.
This is accomplished by shunting (shorting) the over voltage coming in from the grid and the induced voltage that is collected within your home.
Whether the source of electrons are from within your home or coming into your electrical system from outside the home (the grid), the Shield will see the surge and protect your electrical system. Our technology reacts in less than 1 billionth of a second. Since the shunting is completed incredibly fast, the over voltage is drained away from the equipment before the voltage can rise high enough to damage any equipment. We call this new technology SightSpeed™
120 reviews for EMP Shield Portable for RV's, Campers, Apartments, Camping, Travel, and Computers
Only logged in customers who have purchased this product may leave a review.



Kent M. (verified owner) –
Very helpful and knowledgeable about the product
Jesse (verified owner) –
I can’t wait to install in my RV travel trailer! I’m s simple to install…just plug into an outlet! Great products!!
Larry Amor (verified owner) –
I want to protect my PC and associated equipment. This seems to me to be the best start.
Penny O. (verified owner) –
Excited to get it!
HOWARD CHADWICK (verified owner) –
The staff were very helpful. This is the 3rd product I’ve bought from EMP Shield.
Michael S Miller (verified owner) –
Excellent product & service
Stephen Gestenslager (verified owner) –
GREAT HELP
Gayle (verified owner) –
Aimee was WONDERFUL! She was very knowledgeable and very patient with me, even repeating installation instructions at times, as necessary, and she explained to me just how these electronic systems worked, so as to enable me to better understand how to set them up.
(I realize, that in some things I am “stuck” in the simpler ways of the last century, as I am an older, single, retired lady. Lol. I try to understand, seriously, but I really struggle in using all of this modern technology.)
Aimee was so kind to me, walking me through every installation step, as I needed it. I bought four EMPs today, (I already have one in my first vehicle) and feel pretty confident in applying the rest properly.
(I will however, employ an electrician, to install the home EMP Shield into my home electrical box. (Also, the electrician that I picked to hire, is very knowledgeable and experienced in installing, and checking, solar systems. So, I will definitely consult with him regarding all of my electronic devices.)
Thank you folks again. May the Lord bless you!
Deborah (verified owner) –
Could not be any simpler! Just plug it in and you’re protected.
Eric C. (verified owner) –
Very fast shipping and great communication!
Rick (verified owner) –
Customer service was helpful.
Kathleen M. (verified owner) –
Saw the excellent reviews and want the protection.
Jay Fessler (verified owner) –
Excellent purchase and transaction…. Thank you.
Tak Hing T. (verified owner) –
Aimee was very helpful with configuring and matching device to my uses and needs.
June Whatley (verified owner) –
Thank you for your knowledge and help.
Kathryn F. (verified owner) –
This was a no Brainer plug in unit that can be easily moved or put in a different RV. Love this product because instead of losing an outlet you gain more outlets!
Erik (verified owner) –
Saving my AC stuff in 1,2,3 minutes! Easy!
Mark Yozipovic (verified owner) –
Shayden was excellent. Very knowledgeable and helpful!
David Griffith (verified owner) –
Perfect for my Solar generator
Hollis (verified owner) –
Very easy to use