Imagine what you want to automate.
AI writes the code.
You flash it to your board.
In minutes, not months.

Pick your board from 24+ supported, add sensors and actuators, describe in chat what the device should do — and AI generates ready-to-use firmware. No coding skills required.

In detail

• Select your board — Arduino, ESP32, ESP8266 and more. Click the icon in the editor and choose.
• Describe your project — Type what you want in the chat, for example: “I want to read temperature with a DHT22 sensor and display it on an OLED screen”.
• AI generates the code — The system automatically selects compatible libraries, verifies pin assignment, and generates the complete firmware with clear comments.
• Iterate and improve — Keep chatting to add features, change behavior, or fix details. Each change creates a version — you can always go back.

What makes it different

Unlike a generic chatbot, the code is verified for hardware compatibility: validated pin assignment, correct libraries, and automatic compilation. You can also upload existing code (.ino, .h, .cpp, .zip) as a starting point.

All of this happens in the PCGen workspace, our AI Firmware Builder.

Connect via USB and flash from the browser in one click. Or update over WiFi, without touching the device. One or a hundred — same click.

Direct USB flash

• Connect the board to your computer with a USB cable
• Click “Flash” in the workspace
• In the browser popup, select the board's serial port
• Wait for completion — do not disconnect the cable

Requires Chrome or Edge. Works directly from the browser, no additional software needed.

Download and manual install

Download the project as a ZIP file and upload it with Arduino IDE or PlatformIO. Useful if you prefer your traditional development environment.

Wireless update

After the first USB flash, you can enable wireless updates: the system automatically adds WiFi connectivity to your code. From then on, all updates are delivered over WiFi. One click to update one device, same click to update a hundred.

The wireless update feature is called POTA (Programming Over The Air).

Every device gets its own real-time dashboard. Charts, buttons, sliders — set up the widgets you need. Control remotely, from any browser.

In detail

• Monitor — The device sends data to the dashboard: temperature, humidity, pressure readings, or whatever you're measuring.
• Control — The dashboard sends commands to the device: turn on an LED, adjust motor speed, activate a relay.
• Available widgets — Thermometers, real-time charts, sliders, toggles, buttons, dropdowns and much more. Choose what to display and how.
• Automatic configuration — Global variables from your code are automatically analyzed and suggested as widgets, no manual setup needed.

Fleet management

See all your devices in a single view: who's online, which firmware they're running, and if they need an update. Roll out new firmware to an entire fleet with a single click, monitor progress, and verify every device is up to date.

Remote serial console

Read device logs directly from the browser, without plugging in cables. Useful for debugging during development and monitoring in production.

This feature is part of POTA (Programming Over The Air), our device management platform. Discover POTA →

“I had an idea for a smart irrigation system. In 20 minutes I had a working prototype for my investor pitch.”

The problem

Developing a hardware prototype takes weeks of embedded work, specialized skills and costly iterations. Time and budget that an early-stage startup doesn't have.

The solution

• From concept to prototype in hours, not weeks — Describe what the device should do, AI generates the firmware. Flash via USB and you have a working demo.
• Validate before you invest — Test the idea with real hardware before hiring an embedded team or seeking funding.
• Iterate quickly — Change device behavior through chat. Every version is saved, you can go back at any time.
• Scale when you're ready — With POTA, update all pilot fleet devices over WiFi. One click for one, same click for a hundred.

Why PleaseDontCode

You don't need an embedded engineering team to validate an IoT idea. Start free with 1 device, scale when the product is validated.

“We needed to monitor 50 industrial machines. Without a dedicated embedded team, we were operational in a week.”

The problem

SMEs and professionals need to automate processes and monitor systems, but hiring embedded developers is expensive and development timelines are long. Projects sit on hold for months.

The solution

• Cut R&D time — AI generates verified firmware in minutes. What took weeks of manual development is now a chat conversation.
• No embedded team needed — You don't need a specialized engineer to create IoT devices. The plant technician can describe what's needed and get ready-to-use firmware.
• Remote fleet updates — With POTA, update firmware on all devices over WiFi. No travel, no downtime for updates.
• Monitoring dashboard — Every device gets configurable widgets: charts, thermometers, buttons, sliders. Control everything from a browser, from any location.

Why PleaseDontCode

IoT automation and monitoring accessible without embedded skills. Hardware-verified code, wireless updates, and real-time dashboards — all from a single platform.

“I knew nothing about C++. I described what my robot should do and AI did the rest.”

The problem

You have an idea for a home automation project, a robot, a sensor system — but the embedded world seems complicated: languages, libraries, hardware compatibility, compilation. You study for weeks and the LED still won't turn on.

The solution

• Describe, don't code — Type “I want to turn on an LED with a button” or “Read temperature and send it via WiFi”. AI generates the complete code.
• Flash from the browser — Connect the board via USB, click a button. No need to install Arduino IDE, configure drivers, or figure out compilation.
• Learn by doing — Generated code is commented and structured. You can read it, modify it, and understand how it works while your project comes to life.
• Community reference — Explore projects shared by other users, view source code, and build on their work.
• No-code dashboard — Enable POTA and automatically get a web dashboard to monitor and control your device remotely.

Why PleaseDontCode

Your first smart device, without months of studying embedded programming. Free for 1 device, forever. From first idea to working project in minutes.