tower-broadcastRAPT Cloud

Connect RAPT Cloud devices like the RAPT Pill to log fermentation data in Brewfather.

RAPT Cloudarrow-up-right integration can be activated under Power-ups in the settings page of the Brewfather app.

circle-info

Currently the RAPT integration supports fermentation logging from devices like the RAPT Pill and Temperature Controller

1. Copy the integration ID into your clipboard.

2. Go to the Web Hooks page on the RAPT Cloud portalarrow-up-right

3. Then create a new Brewfather Power-up

4. Enter a name and paste the integration ID you found in the Brewfather settings page

Make sure at least one of your devices is activated for the integration, marked by a checkmark. Then click Save.

Your device should then appear in the Brewfather devices page the next time your RAPT device sends data.

Supported Devices

The RAPT Cloud integration supports the following device types:

  • RAPT Pill -- Digital hydrometer for fermentation monitoring (reports as device type "Hydrometer")

  • RAPT Temperature Controller -- Fermentation temperature controller

Data Logged

The following data fields are logged for RAPT devices:

Field
Description

Gravity

Specific gravity reading (SG)

Temperature

Current temperature (Celsius)

Target Temperature

Target temperature set on the controller (when available)

Battery

Battery level

RSSI

WiFi signal strength

Configuration Options

After your RAPT device has sent its first reading and appears in the device list, you can configure per-device offsets by clicking the device name in your batch under Fermentation > Devices:

  • Gravity Offset -- Adjusts all gravity readings by a fixed amount

  • Temp Offset -- Adjusts all temperature readings by a fixed amount

A (configure webhook) link is also available in the Power-ups settings to set up optional data forwarding to an external URL.

Important Notes

  • Data sent more frequently than every 15 minutes will be ignored. Ensure your RAPT device logging interval is set to 15 minutes or more.

  • After the first reading is received, attach the device to your batch in the Fermentation > Devices section.

Last updated

Was this helpful?