waterBrewbrain Float Hydrometer

Set up the Brewbrain Float hydrometer integration to log fermentation data in Brewfather.

Activate in the settings page and copy the following ID

Use this integration to receive Brewbrain Float readings in Brewfather and attach them to active batches.

Documentation for setting up the Brewbrain integration: https://my.brewbrain.nl/docs/integrationsarrow-up-right

Setup in Brewfather

  1. Open Settings → Power-ups.

  2. Enable Brewbrain Float Hydrometer.

  3. Copy the generated ID.

  4. Configure your Float/Brewbrain side to send using that ID.

When enabled, Brewfather also shows a (configure webhook) link for this integration.

Attach the device to a batch

  1. Start logging on the Float side.

  2. Open your batch.

  3. Go to the Fermentation tab.

  4. Open Devices and attach the Float device.

Notes

  • The integration is Premium-gated in the current app flow.

  • The integration page in Settings links back to this documentation via See instructions.

Data Logged

The Brewbrain Float sends data in SenML format. Brewfather extracts and stores the following fields:

Field
Description

Gravity

Specific gravity (SG)

Temperature

Current temperature (Celsius or Fahrenheit)

Battery

Battery voltage (V)

RSSI

WiFi signal strength (dBm)

Configuration Options

After your Float device has sent its first reading and appears in the device list, you can configure per-device offsets by clicking the device name in your batch under Fermentation > Devices:

  • Gravity Offset -- Adjusts all gravity readings by a fixed amount

  • Temp Offset -- Adjusts all temperature readings by a fixed amount

Logging Interval

Never log more than once every 15 minutes. Requests logged more often than that will be ignored.

Last updated

Was this helpful?