Training

In-depth and Hands-On Burner Combustion Training: Simulating Real-World Problems and Solutions

Advance your knowledge of industrial burner systems and combustion management with hands-on training at Power Flame’s state-of-the-art training facility in Parsons, Kansas. Led by instructors with years of experience, each course is designed to give you the practical skills and confidence to troubleshoot, maintain, and optimize burner systems in the field. 

All classes take place at Power Flame in Parsons, KS and start at 8:00 AM each day. Power Flame will provide lunch, dinner, and snacks duirng the duration of the training. Attendees are responsible for booking their own travel and lodging.

We offer third-party Purchase Protection service if you need to cancel unexpectedly due to health reasons. Registrations can be transferred to a different student at any time and can be rescheduled up to two weeks before the class date. 100% of the class cost will be charged for no-show or cancellations within two weeks of the class date.

Frequently Asked Questions
Full Training Calendar
REGISTER HERE

FuNDAMENTALS OF Combustion; 101

Our two-day Fundamentals of Combustion Training; 101 (former Basic Combustion Training) is our most popular class and the best class to start with. It goes over the fundamentals of combustion, safe burner start-up, and adjustment. The majority of the class consists of hands-on training in our training facility with several different burner and boiler packages. We also cover linkage adjustment and touch on parallel positioning.

This training pairs very well with our Basic Controls and Troubleshooting Class; 102.

LEARN MORE AND REGISTER NOW

Basic Controls and Troubleshooting TRAINING; 102

Our two-day Basic Controls & Troubleshooting Training; 102 is a great starter stand-alone class or a perfect pair with our Fundamentals of Combustion. It goes over our most common basic flame safeguard controls. Much of the class consists of hands-on troubleshooting electrical issues on our different burner and control packages. We are able to simulate the most common issues that techs will see in the field and help you navigate to quickly identify and solve the issue using a voltmeter and monometers.

LEARN MORE AND REGISTER NOW

Introduction to Fuel Trains; 103

New class alert!

Our two-day Introduction to Fuel Trains, 103 is designed to discuss all aspects of a typical gas train, as well as the Codes that drive the nuances and differences.  It will cover all of the required components of CSD-1 and NFPA 85 gas trains, as well as how to adjust and set regulators, gas pressure switches and troubleshoot Safety Shut off valves, proof of closure switches and many other items.  This training pairs well with our Fundamentals of Combustion Class, 101.

REGISTER NOW

Cmax Burner
Training; 201

Our two-day Cmax Burner Training; 201 covers Power Flame’s Cmax burner installation, start-up, commissioning, and troubleshooting. Majority of the class consists of hands-on training.

Attending the Fundamentals of Combustion Class is recommended before enrolling in this course.

LEARN MORE AND REGISTER NOW

Director SCS Control TRAINING; 202

Our two-day Director SCS Control Training; 202 covers the complete start-up and commissioning of the Power Flame Director SCS, a fully integrated PLC Control System, powered by Honeywell SLATE. The course curriculum includes theory as well as hands-on training.

Attending the Fundamentals of Combustion Class is recommended before enrolling in this course.

LEARN MORE AND REGISTER NOW

Siemens Comprehensive Controls Training; 203

Our two-day Siemens Comprehensive Controls Training, 203 takes place in Parsons, KS and will focus on the LMV3 and LMV5 parallel positioning systems in detail.  This class will prepare the student to properly specify, install, commission and troubleshoot a Siemens LMV3 and LMV5 control system.  We will also cover HMI’s and expanded capabilities of these systems such as water level control and draft control.  

REGISTER NOW

FIREYE Comprehensive Controls Training; 204

Our two-day Fireye Comprehensive Controls Training, 204 takes place in Parsons, KS and will focus Fireye NXF4000 and NXF6000 controls. This class will prepare the student to properly specify, install, commission and troubleshoot a Fireye control system. This hands-on training will stress the principles of operation, technical details and application guidelines for the Nexus product line.

REGISTER NOW

Cmax with Director SCS Controls Advanced Training; 301

Our three-day Cmax with Director SCS Controls Advanced Training; 301 covers Power Flame’s Cmax burner installation, start-up, commissioning, and troubleshooting as well as an in-depth look into our Director SCS, which is Power Flame’s newest PLC Burner Management System. Attending the Fundamentals of Combustion Class is required before enrolling in this course.

LEARN MORE AND REGISTER NOW

Parallel Positioning Training, 302

Our three-day Parallel Positioning Training; 302 will be taught by industry experts and will focus on several mainstream parallel positioning platforms including Siemens Combustion, Fireye Nexus, and Autoflame Mk8. Attending the Fundamentals of Combustion Class is recommended before enrolling in this course.

LEARN MORE AND REGISTER NOW

june 2026

fundamentals of Combustion, 101

june 2nd – 3rd

CLASS OPEN

Basic CoNTROLS & TROUBLESHOOTING, 102

june 4TH – 5TH

CLASS OPEN

cmax & director scs control advanced training, 301

june 9TH – 11TH

CLASS OPEN

fundamentals of Combustion, 101

june 23rd – 24th

CLASS OPEN

Basic CoNTROLS & TROUBLESHOOTING, 102

june 25TH – 26TH

CLASS OPEN

REGISTER NOW

July 2026

fundamentals of Combustion, 101

JULY 7TH – 8TH

CLASS OPEN

Basic CoNTROLS & TROUBLESHOOTING, 102

JULY 9TH – 10TH

CLASS OPEN

fundamentals of Combustion, 101

JULY 21st – 22nd

CLASS OPEN

CMAX BURNER
TRAINING, 201

JULY 23rd – 24TH

CLASS OPEN

REGISTER NOW

august 2026

fundamentals of Combustion, 101

AUGUST 4TH – 5TH

CLASS OPEN

Basic CoNTROLS & TROUBLESHOOTING, 102

AUGUST 6TH – 7TH

CLASS OPEN

fundamentals of Combustion, 101

AUGUST 18TH – 19th

CLASS OPEN

Basic CoNTROLS & TROUBLESHOOTING, 102

AUGUST 20TH – 21ST

CLASS OPEN

REGISTER NOW

SEPTEMBER 2026

fundamentals of Combustion, 101

SEPTEMBER 1ST – 2ND

CLASS OPEN

Basic CoNTROLS & TROUBLESHOOTING, 102

September 2ND – 3RD

CLASS OPEN

CMAX BURNER TRAINING, 201

September 9TH – 10TH

CLASS OPEN

fundamentals of Combustion, 101

September 22nd-23rd

CLASS OPEN

Basic CoNTROLS & TROUBLESHOOTING, 102

September 24th – 25th

CLASS OPEN

REGISTER NOW

october 2026

PARALLEL POSITIONING TRAINING, 302

OCTOBER 6TH – 8TH

CLASS OPEN

fundamentals of Combustion, 101

OCTOBER 13th – 14th

CLASS OPEN

Basic CoNTROLS & TROUBLESHOOTING, 102

OCTOBER 15th – 16th

CLASS OPEN

REGISTER NOW

NOVEMBER 2026

fundamentals of Combustion, 101

NOVEMBER 3RD – 4TH

CLASS OPEN

INTRODUCTION TO FUEL TRAINS, 103

NOVEMBER 5TH – 6TH

CLASS OPEN

fundamentals of Combustion, 101

NOVEMBER 17TH – 18th

CLASS OPEN

Basic CoNTROLS & TROUBLESHOOTING, 102

NOVEMBER 19TH – 20TH

CLASS OPEN

REGISTER NOW

DECEMBER 2026

fundamentals of Combustion, 101

DECEMBER 1ST – 2ND

CLASS OPEN

Basic CoNTROLS & TROUBLESHOOTING, 102

DECEMBER 3TH – 4TH

CLASS OPEN

fundamentals of Combustion, 101

DECEMBER 17TH – 18th

CLASS OPEN

Basic CoNTROLS & TROUBLESHOOTING, 102

DECEMBER 19TH – 20ST

CLASS OPEN

REGISTER NOW

Class structure & topics

Power Flame’ classes are either two-day or three-day classes held from 8 a.m. to 5 p.m. covering critical knowledge areas including burner fundamentals, system controls, maintenance & troubleshooting, and specialized equipment. 

Whether you’re new to Power Flame systems or looking to deepen your understanding of specific combustion equipment, we have a course that fits your needs. We offer three different types of courses:

100 Level Classes: These introductory courses create the perfect foundation to our full training program lineup, covering the fundamentals of combustion, burner control, and troubleshooting.

200 Level Classes: These courses offer a deeper dive into specific burners and management systems, including the CMAX Burner, Director SCS, and Parallel Positioning. Attending the Fundamentals of Combustion Class is recommended before enrolling.

300 Level Classes: These advanced courses are ideal for technicians, engineers, and managers who already have a solid foundation in combustion systems and want to take their skills to the next level. Completion of the Fundamentals of Combustion Class is recommended prior to enrollment.

Gain Hands-On Experience with Power Flame Burners & Controls

Our goal is to help you walk away from our courses with hands-on knowledge that directly translates to better job performance. By offering demonstrations in all of our courses and hands-on setup of key components in a typical boiler room, our students gain a comprehensive understanding of crucial topics, including:

  • Burner Safety Devices
  • Parallel Positioning
  • Safe Startup Practices
  • Burner System Components for Commercial/Industrial and Process Burners
  • Fuel Supply and Pressures for Oil, Gas, and Natural Gas
  • Linkage Operation

We believe that first-hand experience is invaluable, whether you’re working with burners for the first time or looking to expand your skill set.

Simulating Real-World Problems and Solutions

At Power Flame, our training goes beyond textbooks. We bring real-world scenarios into the classroom, simulating live system challenges to help students develop fast, effective solutions. From ignition failures to combustion inefficiencies, our exercises give you the skills to diagnose and resolve common issues with combustion equipment.

Register Today to Get Started with Power Flame

Don’t miss your chance to build lasting skills with expert-led training in a hands-on environment. Whether you’re maintaining Power Flame burner management systems or installing them for the first time, our combustion control system classes help you work smarter and more efficiently.

For questions about travel, attire, meals, and more, visit our Q&A page. Reach out to the Power Flame team with any further questions.

Are you looking for more information about our training? Please complete this form, and we will be happy to answer your questions shortly. For burner parts, wiring diagrams, and service related issues, please contact our Product Support: 620-820-8301.

By submitting this form, you agree to be added to our email list. You can opt-out at any time by clicking the unsubscribe link in our emails.

If you have any additional questions, please contact:

Steve Brinson, Trainer

sbrinson@powerflame.com

620.820.8352

Lee Duncan, Service Manager Ad Int.

lduncan@powerflame.com

620.820.8383

Ashka Huff, Marketing

ahuff@powerflame.com

620.820.8382