Ein Problem mit diesem Produkt oder Verkäufer melden
I have a JL Wrangler which suffered from a glitch with the auto headlight function after using FlashCal. The Vgate vLinker MC+, when combined with JScan, fully resolved the issue.
The device itself is easy to use. With Bluetooth Low Energy, I didn't even have to pair it using traditional Bluetooth. You just plug the device into the OBD-II port, then launch whichever diagnostic app you have, select the BLE option and it connects within seconds. It's small enough that I can just throw it into the glove box or the center console and just dig it out again whenever I need it. It was fully compatible with my vehicle and I was able to change a lot of functions using it--far more so than I could do with FlashCal. It worked pretty well, although there were a few hiccups when trying to save some of the altered settings where the app became stuck while trying to save the changed settings, but I was able to resolve that issue by restarting the app and cycling the vehicle's ignition state.
Note: For any 2018 and newer FCA/Stellantis vehicles, you will need to have the Security Gateway (SGW) bypass module connected to make any programming changes. That's not a limitation of the vLinker or JScan. That's just FCA/Stellantis gatekeeping everyone--even dealerships--from accessing the computer system in their vehicles for free. The official product that FCA/Stellantis dealerships have to use is wiTech, and aftermarket programmers need AutoAuth to unlock SGW, and both of them need annual subscription. You can find SGW bypass modules on Amazon for about $30.
If you own a JL Wrangler and have issues where you have malfunctioning auto headlamp feature, I have the tutorial on how to fix that issue below:
FlashCal and Tazer users, including myself, have reported the two products introduce a glitch with the JL Wranglers' auto headlight function, where the headlight will automatically turn on when the ambient lighting is low but refuse to automatically turn off when it gets bright, which commonly happens when you're driving through a tunnel or at an extended stop under an overpass. Some people have suggested replacing the ambient light sensor by the windshield, which I tried and that did not resolve the issue.
What seems to happen is when you use FlashCal and Tazer to change any of the settings, they seem to cause a bug where invalid value is entered for how the BCM reads the voltage from the ambient light sensor. The way the ambient light sensor works for JL seems to be resistor-based where being exposed to brighter ambient lighting will cause it to read lower voltage and vice versa. FlashCal and Tazer do not have a way to read and adjust the data to and from the ambient light sensor. JScan, on the other hand, goes fairly in-depth with not only reading the voltage but allows you to adjust, as well.
After you plug the device into the OBD-II port, you can use Bluetooth Low Energy on your phone to establish connection to the JScan app. That only takes a few second, and you don't even have to pair the device to your phone.
1. Go into the "ADAPTATIONS" menu
2. Then access the "AUTO HEADLAMP & AUTO HIGH BEAM SETTINGS"
3. For "Auto Headlamp OFF Threshold", the factory default value is "2.80V"
4. For "Auto Headlamp ON Threshold", the factory default value is "3.60V"
5. Scroll all the way down to "Twilight Sensor / Light Sensor / Tunnel Detect On/Off" and ensure it is set to "Active"
Following the instructions above should restore full functionality.
-
-
-
Bild nicht verfügbar
Keine Abbildung vorhanden für
Farbe:
Wird oft zusammen gekauft
Dieser Artikel: Vgate vLinker MC Bluetooth OBD2 Diagnosescanner für Android & Windows
38,46EUR
Erhalte es bis Dienstag, 12. Mai
Nur noch 1 vorrätig – bestellen Sie bald.
+
11,10EUR
Erhalte es bis Montag, 11. Mai
Auf Lager
Gesamtpreis: $00
Um unseren Preis zu sehen, füge diese Artikel deinem Einkaufswagen hinzu.
Wähle Artikel zum gemeinsam kaufen.
Ähnliche Artikel, die dir möglicherweise schnell zugestellt werden
Seite 1 von 1 Erneut starten
- Vgate OBD2 Bluetooth Scanner vLinker BM Bimmercode Diagnosegerät für BMW/Mini, funktioniert nur mit Android und Windows7,64 EUR VersandErhalte es bis Mittwoch, 13. MaiNur noch 15 vorrätig – bestellen Sie bald.
- Vgate vLinker MS Bluetooth OBD2 Auto Scan-Tool für iPhone/iOS, Android & Windows, unterstützt mehrere CAN-Protokolle (GMLAN, MS CAN, CH CAN, LS CAN)7,64 EUR VersandErhalte es bis Montag, 11. Mai
- Vgate vLinker FD OBD2 Bluetooth Auto Codeleser OBD2 Diagnose-Scanner für Android & Windows7,64 EUR VersandErhalte es bis Montag, 11. Mai
- Vgate vLinker FS Bluetooth OBD2 Diagnosegerät OBDII Auto Codeleser für iOS, Android & WindowsAmazons Tipp7,64 EUR VersandErhalte es bis Montag, 11. Mai
- Vgate vLinker BM Plus Bluetooth BLE OBD2 Scanner für BMW/Mini, funktioniert mit iPhone & Android, entsperren Auto versteckte Funktionen in BimmerCode, OBD II Diagnosegerät7,64 EUR VersandErhalte es bis Montag, 11. Mai
- Vgate vLinker MC Bluetooth 3.0 OBD2 Scanner Codeleser Diagnosegerät für Android & Windows, Schwarz7,64 EUR VersandErhalte es bis Mittwoch, 13. MaiNur noch 12 vorrätig – bestellen Sie bald.
Produktinformation
[OBD APP MUST BE PURCHASED SEPARATELY] - Vgate vLinker MC Bluetooth (ONLY Android & Windows)
Vgate vLinker MC Bluetooth OBD2 Diagnostic Scanner (ONLY Android & Windows) - Support Single Wire CAN(GMLAN) & Medium Speed CAN(MS-CAN)
Vgate vLinker MC Bluetooth is a diagnostic scan tool, trip computer, logger, and real-time performance monitor.
- This pocket-size adapter won't obstruct driver legroom and features unparalleled performance, intelligent sleep mode, hacker-proof security, exceptional third party app support.
- Transform your Android device, or Windows PC into a professional-grade diagnostic scan tool.
- Vgate vLinker MC series is the upgraded version of Vgate iCar pro, specifically for coding APP that requires large amount of data transmission.
- Important Notice: vLinker MC Bluetooth Does not work with iOS system - For Android & Windows only
- If you are looking for a similar product that supports iOS, please see our other model: Vgate vLinker MC+ Bluetooth (for iOS, Android & Windows)
SW-CAN & MS-CAN Support
- Engineered to accelerate performance over the Bluetooth link, Vgate vLinker MC is up to four times faster than before.
- The Vgate vLinker MC Bluetooth OBD-II adapter provides access to SW-CAN & MS-CAN networks in addition to all legislated OBD-II protocols.
More Protocol Compatible
- SAE J1850 PWM
- SAE J1850 VPW
- SAE J1939(CAN)
- ISO 9141-2
- ISO 14230-4(slow)
- ISO 14230-4(fast)
- ISO 15765-4(CAN)
- ISO 11898(raw can)
- Single Wire CAN(GMLAN)
- Medium Speed CAN(MS-CAN)
- Support all 5 OBDII protocols
- Support SW-CAN (GM)
- Support MS-CAN (FORD)
Why should I choose Vgate vLinker MC Bluetooth?
✔ Vgate vLinker MC series is the upgraded version of Vgate iCar pro, specifically for APP that requires large amount of data transmission.
✔ Supports SW-CAN & MS-CAN protocols - can access these proprietary GM & Ford networks in addition to the 5 standard OBD-II protocols.
✔ Vgate vLinker MC Bluetooth turns your Android or Windows mobile device, tablet, laptop, or PC into a sophisticated diagnostics tool and performance monitor. (Note: Not compatible with Apple iOS products).
✔ OBD request byte up to 1024 bytes, can meet the needs of some special long frame communication.
✔ USART data buffer up to 2K bytes, baud rate increased to 500Kbps. Even faster, more reliable, and more feature-rich than its predecessors.
✔ Fully compatible with ELM's AT command set (ELM327, ELM329) and STN's ST command set.
✔ Read check engine light - Check diagnostic codes yourself and make informed repair decisions.
Vgate vLinker MC Bluetooth Operation Steps - Android system
For Android Phone - For detailed steps, please refer to the instruction manual carefully to avoid operating errors.
# Android System Operation Steps
- Insert the product into the OBD interface of the car.
- Turn ignition to Key On Engine Off Position.
- Turn on Bluetooth on the phone.
- After pressing the black button on the product, the device name can be found on the phone. (Important Operation)
- Search for the device name "vLinker MC" and click Pair.
- Enter the pairing code: 1234 . If the pairing is successful, you can open the APP to set up the connection.
* In the steps of APP operation, since different APPs have different setting and connection steps, please operate according to the relevant information of the APP.
HOW TO UPDATE Vgate vLinker MC BLUETOOTH FIRMWARE?
vLinker MC Bluetooth Firmware Upgrade Process
NOTE: The QR code on the product package can be used to download the upgrade App (VgateFwUpdater) and to perform product upgrades.
Please check the attached QR code.
About using the mobile app(VgateFwUpdater)to upgrade the product:
- First, your mobile phone needs to be connected to the product.
- After downloading the latest version of the upgrade App,
- 1) Open the App and click "SCAN", scan the QR code of the corresponding product model provided by us.
- 2) Select the product connection type (WIFI or BT).
- 3) Finally click "DOWNLOAD" and wait for the upgrade to succeed.
---------------------------------------------------------------------------------------
- How to use phone to upgrade firmware? What if fails/interrupted?
- Scan the box's QR code with your phone to download the Upgrade app and upgrade the product.
- Product comes with up-to-date firmware. Rarely need to upgrade. If update fails (fail to connect to the app), unplug & replug, connect to phone and try again.
Produktvideos
Produktdaten
Garantie & Support
Produktgarantie: Für Garantieinformationen zu diesem Produkt bitte Hier klicken
Feedback
Perfect tool for DIY data collection and custom dashboard
This thing is awesome for a diy hacker wanting more out of my older daily driver. I have a 2010 base model Corolla that I drive the crap out of. One thing I love about these low-tech cars is that it's a blank canvas to have fun and not worry about resale value - not like this thing affects that. I have a old surface pro 3 that i've rigged up as my interface for the car. Wanted to take the car integration part to the next level and this OBD2 tool lets me do exactly that. I'm not a software engineer, but lets say I dabble. I can't write anything meaningful on my own but AI like Gemini fills in the blanks for me. I wrote an awesome python tkinter based dashboard for my surface pro that lets me see all sorts of fun things like speed, tach, temperatures of engine coolant and even transmission temp! MAF sensor gives me instant MPG estimation. I can even see my individual tire pressure values when my car only has a light that says when something is low! I have not had a problem with connectivity once I figured it out. For Windows 10, the key is to pair it (even though it says android) with 1234. It just worked right out of the box for me with what I wanted to do with it. If you are a diy kind of person and isn't afraid to throw some vibe coding at it, you can have a lot of fun with the data and create something cool. That's what i wanted out of it and that's what it gave me. If that is you, then buy it. Can't speak for the other stuff like pairing it with existing apps or whatever. But its easy to use for me! Compatible right out the box. Love it!!
Spitzenrezensionen aus USA
Es gab ein Problem beim Filtern der Rezensionen. Bitte lade die Seite neu.
-
Bewertet in den USA am24. Mai 2025Größe: vLinker MC+ BLE4.0 - Android, iOS & WindowsVerifizierter Kauf
-
Bewertet in den USA am16. Januar 2022Größe: vLinker MC+ BLE4.0 - Android, iOS & WindowsVerifizierter Kauf
-
Bewertet in den USA am1. Januar 2026Größe: vLinker MC+ BLE4.0 - Android, iOS & WindowsVerifizierter Kauf
This thing is awesome for a diy hacker wanting more out of my older daily driver.
Perfect tool for DIY data collection and custom dashboard
Bewertet in den USA am1. Januar 2026
I have a 2010 base model Corolla that I drive the crap out of. One thing I love about these low-tech cars is that it's a blank canvas to have fun and not worry about resale value - not like this thing affects that. I have a old surface pro 3 that i've rigged up as my interface for the car. Wanted to take the car integration part to the next level and this OBD2 tool lets me do exactly that.
I'm not a software engineer, but lets say I dabble. I can't write anything meaningful on my own but AI like Gemini fills in the blanks for me. I wrote an awesome python tkinter based dashboard for my surface pro that lets me see all sorts of fun things like speed, tach, temperatures of engine coolant and even transmission temp! MAF sensor gives me instant MPG estimation. I can even see my individual tire pressure values when my car only has a light that says when something is low! I have not had a problem with connectivity once I figured it out. For Windows 10, the key is to pair it (even though it says android) with 1234. It just worked right out of the box for me with what I wanted to do with it.
If you are a diy kind of person and isn't afraid to throw some vibe coding at it, you can have a lot of fun with the data and create something cool. That's what i wanted out of it and that's what it gave me. If that is you, then buy it. Can't speak for the other stuff like pairing it with existing apps or whatever. But its easy to use for me! Compatible right out the box. Love it!!
Bilder in dieser Rezension
Spitzenrezensionen aus anderen Ländern
-
Maravilloso, magistral , perfecto para aprender de verdad.Bewertet in Spanien am 16. März 2026
Perfecto para uso
Größe: vLinker MC+ BLE4.0 - Android, iOS & WindowsVerifizierter Kauf -
JackBewertet in Großbritannien am 3. Mai 2025
Excellent great value OBD scanner for all cars
Größe: vLinker MC+ BLE4.0 - Android, iOS & WindowsVerifizierter Kauf -
Roberto MejíaBewertet in Mexiko am 3. November 2025
Buen escaner
Größe: vLinker MC+ BLE4.0 - Android, iOS & WindowsVerifizierter Kauf -
GeoffBewertet in Australien am 12. Juli 2021
RTFM!
Größe: vLinker MC+ BLE4.0 - Android, iOS & WindowsVerifizierter Kauf -
AKBewertet in Kanada am 20. Februar 2025
No compromised highly regarded Real ELM 327 OBD2 Adapter. GMLAN, MS-CAN
Größe: vLinker MC+ BLE4.0 - Android, iOS & WindowsVerifizierter Kauf
