Report an issue with this product or seller
I bought 3 packs of 5 pieces of this product and this is not working how I was thinking it should.
I did many tests to be sure what was happening. First I connected an USB Flash Drive directly to the USB 3.0 to check the performance (Picture Test #1). After that, I connected an USB A to USB A cable to my computer in the plug #1 and the plug #2 to the keystone jack to create an extension to connect a device (my idea was to pass this to another room for the wall), this does not work how I was thinking with an external disk, but this work like USB 2.0 with the same USB Flash Drive, the speed was reduced from 240 MB/s to 40 MB/s read and from 59 MB/s to 29 MB/s write.
After some days I could undertstand what the problem was.
I used an USB A to A and usually these are crossed. I mean, the pin #5 in the plug #1 is connected to pin #8 in the plug #2, pin #6 to pin #7, pin #8 to pin #5 and pin #9 to pin #6 (Picture Table 1). Therefore, if we use this type of cable and this keystone jack to create an extension, the result will be something crossed and will not work to connect USB 3.0 devices, only will work with USB 2.0, because the pins used to USB 2.0 are not crossed (Pin 1 to Pin 4).
To have this working we should use an special USB A to USB A cable with VBUS and Data Pair Straight Through (Picture Table 3).
In my case I could not find this type of cable here in Amazon, so I had to change the connections directly on the connector. You can see a picture how I crossed the pins to get a direct cable connection. Also, other option is cut the cable and create a direct cable, I think this last it's better for the performance, we can weld the wires and conver these again with aluminum to avoid interferences.
After this changes I tested and I can say this work like USB 3.0 (440 MB/s read and 449 MB/s write). I tested with an external M.2 Disk.
Would be nice to have this jackstone key crossed to avoid an extra work, however, I could not find a keystone USB A female to USB A female crossed.
Similar items that may deliver to you quickly
Page 1 of 1 Start over
- PANPEO USB 3.0 Keystone Jack Insert, Female to Female USB Coupler Adapter (5-Pack, Black) for Wall Plate and PanelEUR 7.17 shippingGet it as soon as Wednesday, May 6Only 8 left in stock - order soon.
- XMSJSIY USB 3.0 Keystone Jack Inserts Adapter 5Gbps USB3.0 A Female to Female Coupler Connector Snap-in Socket for Wall Plate Outlet Panel- 3PCSEUR 7.17 shippingGet it as soon as Wednesday, May 6
Product information
Warranty & Support
Feedback
Similar brands on Amazon
Page 1 of 1Start Over
Sponsored
This is a direct connector, it will not work to create an extension using a USB A to USB A (Crossed)
I bought 3 packs of 5 pieces of this product and this is not working how I was thinking it should. I did many tests to be sure what was happening. First I connected an USB Flash Drive directly to the USB 3.0 to check the performance (Picture Test #1). After that, I connected an USB A to USB A cable to my computer in the plug #1 and the plug #2 to the keystone jack to create an extension to connect a device (my idea was to pass this to another room for the wall), this does not work how I was thinking with an external disk, but this work like USB 2.0 with the same USB Flash Drive, the speed was reduced from 240 MB/s to 40 MB/s read and from 59 MB/s to 29 MB/s write. After some days I could undertstand what the problem was. I used an USB A to A and usually these are crossed. I mean, the pin #5 in the plug #1 is connected to pin #8 in the plug #2, pin #6 to pin #7, pin #8 to pin #5 and pin #9 to pin #6 (Picture Table 1). Therefore, if we use this type of cable and this keystone jack to create an extension, the result will be something crossed and will not work to connect USB 3.0 devices, only will work with USB 2.0, because the pins used to USB 2.0 are not crossed (Pin 1 to Pin 4). To have this working we should use an special USB A to USB A cable with VBUS and Data Pair Straight Through (Picture Table 3). In my case I could not find this type of cable here in Amazon, so I had to change the connections directly on the connector. You can see a picture how I crossed the pins to get a direct cable connection. Also, other option is cut the cable and create a direct cable, I think this last it's better for the performance, we can weld the wires and conver these again with aluminum to avoid interferences. After this changes I tested and I can say this work like USB 3.0 (440 MB/s read and 449 MB/s write). I tested with an external M.2 Disk. Would be nice to have this jackstone key crossed to avoid an extra work, however, I could not find a keystone USB A female to USB A female crossed.
Top reviews from the United States
There was a problem filtering reviews. Please reload the page.
- Reviewed in the United States on May 17, 2021
This is a direct connector, it will not work to create an extension using a USB A to USB A (Crossed)
I bought 3 packs of 5 pieces of this product and this is not working how I was thinking it should.This is a direct connector, it will not work to create an extension using a USB A to USB A (Crossed)
Reviewed in the United States on May 17, 2021
I did many tests to be sure what was happening. First I connected an USB Flash Drive directly to the USB 3.0 to check the performance (Picture Test #1). After that, I connected an USB A to USB A cable to my computer in the plug #1 and the plug #2 to the keystone jack to create an extension to connect a device (my idea was to pass this to another room for the wall), this does not work how I was thinking with an external disk, but this work like USB 2.0 with the same USB Flash Drive, the speed was reduced from 240 MB/s to 40 MB/s read and from 59 MB/s to 29 MB/s write.
After some days I could undertstand what the problem was.
I used an USB A to A and usually these are crossed. I mean, the pin #5 in the plug #1 is connected to pin #8 in the plug #2, pin #6 to pin #7, pin #8 to pin #5 and pin #9 to pin #6 (Picture Table 1). Therefore, if we use this type of cable and this keystone jack to create an extension, the result will be something crossed and will not work to connect USB 3.0 devices, only will work with USB 2.0, because the pins used to USB 2.0 are not crossed (Pin 1 to Pin 4).
To have this working we should use an special USB A to USB A cable with VBUS and Data Pair Straight Through (Picture Table 3).
In my case I could not find this type of cable here in Amazon, so I had to change the connections directly on the connector. You can see a picture how I crossed the pins to get a direct cable connection. Also, other option is cut the cable and create a direct cable, I think this last it's better for the performance, we can weld the wires and conver these again with aluminum to avoid interferences.
After this changes I tested and I can say this work like USB 3.0 (440 MB/s read and 449 MB/s write). I tested with an external M.2 Disk.
Would be nice to have this jackstone key crossed to avoid an extra work, however, I could not find a keystone USB A female to USB A female crossed.
Images in this review
- Reviewed in the United States on January 9, 2026
- Reviewed in the United States on September 6, 2024
In my infinite wisdom, I decided to clean up my workbench area. Many pounds of filament later, I have a Multiboard setup. I also decided to take a 1U keystone panel and outfit it with HDMI, USB, and Ethernet jacks. I got the BERLAT XIUXIU USB 3.0 Keystone Jack Inserts (5pcs, F-F, Black-5 Pack).
Tight fit, but good performance (see details). Recommended
Reviewed in the United States on September 6, 2024
The good news is that the jacks work. They are a pretty tight fit in my patch panel, but without any adverse effects. I got some M-M patch cables to make my setup work, and it works well. With a unit cost under $2, I'm happy with the economics of this product. Recommended
Images in this review
- Reviewed in the United States on May 31, 2023
Thanks to Giuseppe's comments for identifying this issue and explaining the problem. This connector is a straight through connector and will block USB3 speeds in certain circumstances. I'm using it between a computer and a USB3 hub with a flash drive.
Thanks to Giuseppe for warning that this is not a cross over connector and can prevent USB3 speeds.
Reviewed in the United States on May 31, 2023
Without this connector, I get 442MB/s Read and 370MB Write speed.
With the stock connector installed it drops to only 41MB/s Read and 38MB/s Write.
I cut some traces and turned it into a cross over connector. With the cross over installed, 442MB/s Read and 370MB write.
If you are good a soldering and PCB rework, you can change this to a crossover connector.
Warning, this procedure could ruin the connector and destroy attached computers and devices.
Follow these instructions at you own risk, I am not liable for any damage caused if you follow the procedure.
1. You'll need to cut traces on the bottom (Side with lettering) at pins 5,6,8 and 9 at both connectors.
2. Add the following wires:
3. Connector 1 Pin 5 to Connector 2 Pin 8
4. Connector 1 Pin 6 to Connector 2 Pin 9
5. Connector 1 Pin 8 to Connector 2 Pin 5
6. Connector 1 Pin 9 to Connector 2 Pin 6
You may also want to cut the VBUS trace to prevent back powering devices
Images in this review
- Reviewed in the United States on September 2, 2025
Works as described. No issues.
Images in this review
