This dryer works extremely well. I would definitely buy more. I love that it can feed the 3d printer while it is drying the filament and the flexibility of being able to have another color/roll of filament drying at the same time is a plus. The display is very clear and easy to read. Before buying this dryer, I had issues with my prints not adhering to the plate and would have "spaghetti messes" often. I did not realize how much of a difference having it made. My prints come out much cleaner now thanks to having it. It saved me a lot in filament because instead of throwing away what I thought was bad filament, I was able to continue use once it was properly dried. the price was worth it for how much I saved. It fits perfectly next to my Flash forge printer and doesn't take up too much space. The temp range varies well for a typical hobbyist, but I am not too sure for some of the more industrial materials, but I have used it for PLA, TPU and PETG, personally.

This filament dryer is a little workhorse! Such a valuable piece of equipment and does its job well. Plenty of options and temp settings for every filament I have used thus far.

I’m in love with this dryer. It works as expected and having the feeder on top separate from the lid is great. I had tried the previous version of this and the lid would keep lifting as the filament fed into the extruded. They solved that problem! I love the look of this and its size is perfect for the small area I have for this printer. I saw in some reviews that the touch screen isn’t as responsive. The only issue I have is when you tap the power button it isn’t always responsive and sometimes have to tap it a couple times. But for me that isn’t a problem as I power mine down by the main switch in the back. The rest of the touch features work perfectly with no responsiveness issues at all. I’ve been using this for a bit now and over all I’m very happy with it. I am giving it 4 stars just because of the issue with the power button on the touch screen as some people may get annoyed and I want to give an honest review. I feel it’s built well and has all the features I could want. I love that I can pick different materials and that it has a memory feature incase the power goes out, which mine did while in the middle of printing. It put the settings right back to where I had them when the power came back on. Overall I’m extremely happy with this dryer and would recommend it.

Wow, this little "dryer" works great and has made a huge improvement in my 3D prints as they no longer slip off the plate or layers peel. This is a great addition to any 3D printer enthusiast.

Works good. The actual (measured) temperature of one of the chambers is consistently 5F higher than the set temperature. I lower the set temperature 5F and it works fine. The second chamber maintains the temperature at the set temperature.

I use this every time I print. It helps to keep the filament dry on long print jobs. Recommended.

So far it's great and has completely changed how my prints come out. It even seems to improve brand new sealed material prints. Humidity in the material was the #1 problem I've been facing, why I've changed so many nozzles, hot end parts and all manner of frustration. I'm 100% glad I bought this and wish I'd known about this sooner.

Now for the unit:

The touch screen is a little junky, wish it had physical buttons.

The screen itself is very nice.

Operation is very straightforward.

The unit dries material very quickly.

The best part is I can run BOTH printers directly from the dryer so I start the dryer 1hr before and let it run the entire print.

The unit takes up very little room.

The fan noise concerns me a bit, not because the noise is annoying but because it really sounds like the bushings are bad with a rattle. If I end up changing the fan soon I'll put in a ball bearing fan.

Yes I'd buy this again. I MIGHT have a different opinion if I had another model to compare it to, but right now it's great.

So far this has done it's job well.

The control panel is easy to use.

I've even successfully recharged dessicant in the dryer.

Sounds level is ok, I don't usually notice it, though my wife comments about it.

I really wanted to get behind this filament dryer. Three main issues keep me from doing that. The fan bearings went out after a of couple weeks of not using it very often. And the temps aren't accurate and run hotter than the setting by as much as 20 percent. This can possibly could ruin filament so be careful. After getting the run around on a replacement I had to get Amazon involved again. They finally sent a replacement, but not what I was told. Not the entire filament dryer as promised. It finally shipped from China after contacting them three different times. When it arrived I thought someone shipped me something by mistake. I was surprised to see it was only a fan. This dryer is not meant to be serviceable. The front touch screen is glued to the bottom cover. The only choice is to cut the cover so I did it with a Dremel as you can see in the picture. Plus you have to peel the rubber pads off the bottom to get to the screws. I had to glue them back on. No instructions were sent and nothing on YouTube. The fan plug is glued to the socket and almost impossible to remove. The location of the plug difficult to reach as well. I was able to get it back together and it works, for now. I do not have confidence this fan will last any longer. I can't recommend this dryer so buy at your own risk.

Works exactly as expected and dries filament well. It's quiet and doesn't kick off much heat itself. Most importantly, I trust a brand like Creality when it comes to running unattended heaters for 8 hours not to burn my house down. It's a bit more expensive but the peace of mind and quality is worth a few extra dollars.

The only downside is that the screen doesn't feel high quality. It might just be that way to withstand heat and consume less power because it looks like a low power touch screen calculator style display. It works fine to press a couple settings and then forget about it, just press slowly and hard and it'll register your inputs fine.

apres 1 ans d utilisation intensif il fonctionne encore tres bien et seche tres bien les fillament vous choisiser le filament et pop il vous recomende de le secher pour x nombre d heure insta et voila tout est ok

Great

Es un buen equipo, de construcción muy buena, muy silencioso durante su funcionamiento al igual que es bastante fácil de utilizar. Incluye una manguera de TPU que permite conectar la secadora directamente a la impresora 3D permitiendo dejar el carrete de filamento en un ambiente de humedad controlado hasta ese punto.

Works as advertised, dries filament fairly quick and my prints have improved significantly.