それほど期待をしていなかったのだが、送られてきた商品は重量もあり、手に取った瞬間にかなりテンションが上がった。この価格を考えればとても素晴らしいと思う。

日本語の取説もついているので調整もとても簡単にできる。

購入したばかりなので、耐久性や傷つきにくさは不明。

だが、このベルトが壊れたらまた同じものを購入するだろうと思う。

とても気に入ったのだが、多少高くなっても2重ロック式を採用してもらえるといいのだが・・・。

品質、デザイン、その他、価格以上の価値あり。 バンド長の調整工具つきで簡単に交換出来るのも良い。

Easy and quickly for Everybody,

Good Looking,very easy

ステンレスのケースにはステンレスのベルトが似合うと思いますが、標準のリンクブレスレットの

デザインがあまり好きでは無く、ロレックスタイプを探していてこれにたどり着きました。

ラグとベルトの間に隙間出来ます。僅かな隙間ですが、高級感を損なう点がマイナスです。

他の方も書いているとおり、留め具もちょっとチープな感じです。

しかし、価格を考えると品質やロレックス風の演出は悪くないと思います。

長さ調節は付属の治具で簡単に行えました。ピンの中央を慎重に狙えば問題無しです。

手首周りが実測で19cmの私は、2コマ詰め、留め具部分1ステップ移動でピッタリの長さです。

AppleWatchはベルトの交換が簡単なので、取り替えて楽しみたいと思っています。

シンプルイズザベスト!

しっかりとした重厚感!

傷が…でもそれを"味"と見れば許容範囲。

金属製のシンプルなベルトですが、高級感があります。

シルバーのアップルウォッチのカバーとセットで使っています。

ベルトのピンをつけたり外したりする工具がついていて、お得感があります。

難点としては、留め金が外れにくくなることがあること。

38mm用か42mm用かよくわからず、間違って42mmを買ってしまったのですが、カバーをつけて使用したら、違和感なく使えています。

値段も安く、良い製品だと思いますが、腕に装着するときにバックルをパチンとはめる部分が、非常に固く、一般的な時計の金属ベルトに比べるとかなり力が必要でした。また、リリースボタンの作りがもう少し、しっかりしていると良いと思います。

2019/9追記

概ね2年使いましたが、ベルトをApple Watch側の穴にロックする機構(ベルト側の出っ張り)部分が垂直にに出なくなり、斜めにしか出なくなりました。従って、片方へは外れませんが、反対方向へ押すとベルトが外れてしまいます。(イメージ分かります？)これではさすがにいつ外れるかわからないので、もう一度本製品を再購入しました。

ちなみに、バックル部分には問題ありません。

2年使ってこの値段ならいいか？という印象です。

お値段相当で、チープさは否めない。

結局、他社（モレラート社）の皮革バンドに買い替えました。

So, the stainless JETech band for Apple Watch 42mm is good. I could stop there - it's only the price of a small round in the pub after all - but I guess you'll want to know if there's a "But" or an "And"...

So, what do you get in the box? You get the strap, a link removal tool and a leaflet explaining how to use the tool. It's not a great leaflet but it's not a complex tool. However it might help to go over the process and highlight the gotchas. I'll come back to the strap afterwards...

The tool is a simple device consisting of an adjustable platform you can rest the watch strap on while pressing out link pins, with a large knurled wheel to move the pusher (pic 1) and a slotted plate to push against (pic 2). The pusher has a selection of replaceable tips to accommodate different sized strap pins and the correct one may be fitted. If it isn't, it can be added by undoing the silver collar by the pin (it unscrews) and replacing the tip (pic 3).

In use you raise the adjustable platform as high as you can - if it goes too high you won't be able to turn the pusher as these parts can block each other (pic 4 - wrong, pic 5 - right). It won't go high enough I'm afraid as the pusher is too wide for that to happen so you will need to hold the strap links in place as you tighten the pusher.

There are several things that can go wrong here:

You might be pushing the pin from the wrong end - there is an arrow on the links showing which way the pin comes out. It DOESN'T point to where you push!! (pic 6 shows a link and pin)

You might not have the link lined up with the slot - if you don't line it up the pin cannot come out!

You might have missed the pin hole and be pushing against the link - in this case the pusher will be VERY hard to turn and you will bend the pusher pin. The pusher should not be very hard to turn - FORCE IS NOT THE ANSWER. If the pin doesn't push out with only a little effort then check it's all lined up.

Always use the largest pusher pin you can - the smallest one could go down the side of the link pin and then it will wedge solidly in place (link pins are what are known as "split pins" and you push out from the closed end by the way). Once you push the wide part of the pin out it will pull out easily (pic 7 showing a pin being pushed out into the slot)

Putting pins back is simple: push in as far as it will go by hand then hold the link and push against a solid surface like the top of the link remover. Note that the link remover by itself will cost around £6 on Amazon so this kit is really good value.

Once you have removed the required links to get the band adjusted to the correct size you are all set. The watch strap slides in like any other Watch replacement strap and you may want it one way round or the other depending on how you like to close the clasp. The fittings are as good as you might expect on a watch strap of this price point and possibly quite a lot better - for me the strap mounted solidly and accurately in place and has shown no signs of movement once it "clicks" into place. The strap is solid (like any other stainless watch band basically) and the clasp is simple and (so far) secure. It's a bracelet so you would be unliekly to lose the watch even if the clasp came undone but there's no sign of problems with it yet (early days). The clasp is a standard mechanism and I'd advise always using the release mechanism when opening or closing it to reduce wear - if the post that the clasp clips to became worn then I suppose the clasp could slip but it's all metal so there's no real reason why it would.

To wear, the strap is solid, not bulky or very heavy but not flimsy or over-light (I find titanium straps can feel quite disconcertingly light). This won't weigh you down and is, of course, waterproof. And good looking. It matches the stainless Watch case well and would probably work with the aluminium case too due to the brushed finish. Overall, I recommend this strap and the kit pretty highly.

This is the best band I have bought for my Apple Watch 4. This one actually fits a 44 mm watch. The others all claimed to be 44 mm but were in fact Apple Watch 3 bands that were designed and sized for 42 mm watches. This is actually designed for the size of the watch. It doesn't move from side to side.

Moreover, this band also comes with a lifetime warranty, (which I assume to be my lifetime) while others come with a minimal warranty often numbered in days or months. Not bad.

The quality of this watch band is noticeable when you open the box. It's well designed and contains, in one compartment, the watch band and in another, the adjustment tool along with replacement pins for the tool's pin that serves to remove segments of the band. The watch band itself is protect — fiercely — by a plastic cover that will require some effort to peel off. The band itself immediately feels like a quality item. It has heft, and is obviously quality stainless steel.

The tool to adjust the band to one's wrist is made of aluminium and plastic. It can not only be adjusted to works on any number of band's styles and their link width, but on the thickness of any particular band by raising or lowering the platform on which the band rests when being adjusted so that the push pin of the tool fits perfectly the thickness of the band. That is quite remarkable. This is a tool that tool stores would retail for what you pay for this watch band. Think of the fact that my wife and I have owned a couple of pricey Tissot watches for years, and while they came with an enormous jewel-like box with drawers containing an book about Tissot, it did not include that little tool. That tool would have made it easy to adjust the length of the watch bands which are similar to this one.

Alright. I'll admit I'm impressed. I did not expect it. In fact I bought this band because of Amazon's return policy. It's not going back. The watch with this band is on my wrist and feels secure.

Das Armband ist wirklich gut verarbeitet, massiv, "zwackt" nicht an behaarten Armen und auch der Verschluss hält einwandfrei. Ein unglaublich gutes Preis-/Leitsungsverhältnis!

Vielleicht noch ein Hinweis, falls das Armband durch das Herausnehmen der Glieder nicht gut passen sollte:

Direkt am VERSCHLUSS befindet sich auch noch eine Verstellmöglichkeit durch Versetzten des Stiftes in 3 Stufen (da, wo die 3 kleinen Löcher direkt nebeneinander sind). Man drückt einfach mit z.B. einer Büroklammer den Stift zusammen (ist gefedert) und kann dann den Stift wieder in eines der 3 Löcher einsetzen. So lässt sich das Armband noch um ca. 0,5 cm verstellen.

Bei mir war das Armband nach der Entnahme von 4 Gliedern etwas zu eng - mit 3 entnommenen Gliedern etwas zu weit. Ich habe dann wieder ein Glied eingesetzt und danach noch die Verstellung über den Verschluss vorgenommen. Jetzt passt das Armband sehr gut.

Tolles Produkt für einen sehr günstigen Preis!

Class hard to beat for the cost, quality, fit, function, finish and sleek fashion. My fears included all the above plus it was important for it NOT to have an extra wide space between were it attaches to the watch. Most of the others I looked at had a curved little bar on each side that made them look like an added replacement, this band doesn't to me. To ensure it was installed properly I took it and had it installed. This gave me some piece of mind that if done right it was in protection of my watch, it did cost me more than the band. But...this allowed me to get the perfect fit after trying it on 3 different times, the 4th was the charm without the frustrations of "diy" not to mention adjustments for the life of the band if needed from the place that put the band on. Just to be clear I don't think I would have had any problems with installing the band. I chose to let someone else have that pleasure. This band has exceeded my expectations thus far. It is not too bulky, moves very well, not too heavy, yet seems solid, no pinching, the band has not scratched with daily wear. The clasp has few scratches and I would have preferred the logo not be on the outside, it's the only negative. It also matches my Protectif RFID blocking stainless steel card holder. I feel like this was the perfect band for me. The best part of this review is the fact I will buy another to make sure I can get it again.

La correa cumple con las expectativas esperadas:

Material: Excelente 100% Acero, se siente pesado de buena calidad.

Vista: Muy Bonito, el reloj se ve elegante y moderno.

Pros: Por el precio es muy buena opción ya que los materiales y acabados están a la altura e otros similares de mayor costo.

Contras: La forma de quitar los eslabones requiere de una maquina extra que viene incluida, es muy sencillo hacerlo, pero se comenta.