About Alder Mobile
The new and improved Alder Home Security App lets you control your lighting, climate, cameras, and security from a single application. STAY CONNECTED FROM ANYWHERE IN THE WORLD Receive real-time alarm status and arm or...
The new and improved Alder Home Security App lets you control your lighting, climate, cameras, and security from a single application. STAY CONNECTED FROM ANYWHERE IN THE WORLD Receive real-time alarm status and arm or disarm your security system remotely. Get instant alerts in the event of a security alarm or be notified when your family arrives home. REAL-TIME VIDEO MONITORING AND EVENT RECORDING Set cameras to automatically record security events in your home. Check in on your family and pets when you can't be there. See who is at the door, or monitor your premises from multiple cameras. A SINGLE APP TO CONTROL YOUR ENTIRE HOME Enjoy full interactive home control, including lights, locks, cameras, thermostats, garage doors, and other connected devices. PLEASE NOTE: To access this app, you must set up an account with Alder.
Version History - Improve camera handling of push notifications on cold starts on certain cameras. - Resolved identification and handling issues on certain panels. - Fixed some bugs with the messenger and notifications. - Fixed a "Disarming..." indicator that could remain on screen after the system had disarmed. - Improved camera/doorbell support on certain devices. - The watch app now supports zone statuses. - Fixed an incorrect orange settings indicator on certain cameras until the SD Card screen had been opened. - Fixed a sensor zone occasionally listing the same state twice (e.g., "Tampered | Tampered"). - Activating or deactivating a scene on a multi-partition panel no longer resets the scene to partition 1. - Scanning certain non-validated cameras now shows a clearer prompt with options instead of failing partway through pairing. - Added motion tracking support for compatible cameras where the feature was missing. - Fixed several issues on multi-partition systems, including incorrect arming options and zones disappearing when switching partitions. - Improved sync of arming state and user permissions when returning to the app. - Reduced flicker and faster app launch on accounts with multiple systems. - Fixed a spurious "Failed to grant access" message when adding a user. - Fixed a rare crash when handling push notifications. - Disabled partitions are no longer shown on device, zone, and scene cards. - Improved the camera Event Reporting toggle with a loading indicator while changes apply. - Misc. bug fixes and improvements. 3.31.6 13h ago - Improved NFC support where applicable. - Added partition and cancel/confirm support in the watch app. - Improved sensor support for Open/Close scene triggers. - Added momentary open hardening. - Improved System Arming Level triggers to better support different panel types. - Improved live view aspect ratio support. - Various UI and prompt tweaks. - Added camera battery indicator where supported. - Fixed username sync issues. - Fixed some camera timezone issues. - Resolved issues between user sessions. - Fixed Zone notification device name not showing in notification title. - Resolved localization and notification issues. - General crash hardening. - Misc. bug fixes and improvements. 3.31.5 May 18 - Misc. bug fixes and improvements. 3.31.4 Apr 16 - Misc. bug fixes and improvements. 3.31.3 Mar 24 - Fixed some localization issues. - Fixed some camera aspect ratio issues. - Resolves some motion detection setting issues. - Adds some motion detection event context info where applicable. - Misc. bug fixes and improvements. 3.31.2 Mar 20 - Fixed some localization issues. - Fixed some camera aspect ratio issues. - Resolves some motion detection setting issues. - Adds some motion detection event context info where applicable. - Misc. bug fixes and improvements. 3.31.0 Mar 6 - Misc. bug fixes and improvements. 3.30.1 Feb 13 - Zone bypass prompt should now show where applicable during arming sequences. - Misc. bug fixes and improvements. 3.29.0 Jan 26 - Misc. bug fixes and improvements. 3.28.12 12/12/2025 - Misc. bug fixes and improvements. 3.28.11 12/10/2025 - Activity/Ignore/Privacy zone support has been improved on certain camera models. - PTZ support is now blocked on certain models when a privacy zone is active. - PTZ Calibrate/Home setting should now work where supported. - PTZ on certain camera models should now work by holding the buttons. - Improved support for larger accounts. - Misc. bug fixes and improvements. 3.28.10 11/22/2025 - Resolved a doorbell enrollment issue that resulted in notifications not being configured initially. - Improved some enrollment steps on certain cameras. - Addresses an issue where sensor temperature would be invisible on certain panels. - Resolved a camera provisioning issue where certain text would get truncated if the user had Bold text accessibility option enabled. - Resolved some issues around SD Card reading/formatting in certain cameras. - Improved camera support. - Misc. bug fixes and improvements. 3.28.8 11/01/2025 - Misc. bug fixes and improvements. 3.28.7 10/23/2025 - Fixed a bug that caused the EULA acceptance screen to have buttons that matched the toolbar and were therefore impossible to see. - Resolved issues with two-way voice on certain doorbells. - Better handling of camera checking during enrollment against plan counts. - Resolved a bug for camera speaker settings on newer cameras. - Added initial scene name editing during creation. - Resolved an issue that prevented most z-wave devices from launching into their respective UIs from the device screen. - Resolved an issue that prevented certain camera provisioning attempts from succeeding. - Misc. bug fixes and improvements. 3.28.6 10/16/2025 - Misc. bug fixes and improvements. 3.28.5 10/08/2025 - Improved chime on open/close support. - Sending silence trouble beeps request now informs user that the request was sent. - Resolved issue where cancel/confirm feature setting wasn't captured in certain instances. - Improved chime managment support for partitioned systems. - Resolved a bug that prevented the global chime from showing the correct state. - Event log users should now match other platforms/clients. - Fixed a bug resulting in stalling when enrolling Onvif cameras. - Resolved a crash when removing an Onvif camera. - Resolved an issue where renaming a zone could see it flash back to the previous name due to a race condition with requesting the cached name immediately after. - Misc. bug fixes and improvements. 3.28.4 10/06/2025 - Improved peripheral trouble handling. - The silence troubles button should now always be shown on the trouble screen. - Certain panel types will now let you associated them with ONVIF/RTSP cameras where supported. - Added support for "snoozing" a walkthrough after initial dismissal on certain panels. - Misc. bug fixes and improvements. 3.27.2 03/08/2025 - Resolved an issue preventing manual unbypassing bypassed zones on an older panel type. 3.27.1 02/11/2025 - Added support for unbypassing bypassed zones manually on newer panel types. - Fixed some issues around event logs in Demo Mode including their persistence once you log out. - Event logs should now be pulled for all panel types. - Resolved an issue in the system selection popup that prevented certain systems from showing their current armed state. - Resolved an issue that prevented door lock logs from populating. - Added theme change support to a view controller where it was missing (used by the Events screen/tab). - Added watch support. - Crashing bug fixes. - Misc. bug fixes and improvements. 3.27.0 02/10/2025 - Fixed an issue on iOS 18 iPad devices where a new tab bar style prevented system switching. - Resolved a login screen prompt issue related to connectivity. - Misc. bug fixes and improvements. 3.26.17 01/08/2025 - Crashing bug fixes. - Misc. bug fixes and improvements. 3.26.16 12/23/2024 - Fixed an issue that could lead to z-wave thermostats to flicker values for it's temperature based on incoming reports in different scales. - Crashing bug fixes. - Misc. bug fixes and improvements. 3.26.15 12/12/2024 - Misc. bug fixes and improvements. 3.26.6 10/22/2024 - Resolved a bug that prevented user preferences from being saved properly. - Misc. bug fixes and improvements. 3.26.5 10/12/2024 - Improved sensor detection in initial walkthrough. - Misc. bug fixes and improvements. 3.26.4 10/09/2024
Previous Versions
Here you can find the changelog of Alder Mobile since it was posted on our website on 2023-06-20 16:24:59.
The latest version is 3.31.6 and it was updated on 2026-06-10 07:16:01. See below the changes in each version.
Alder Mobile version 3.31.6
Updated At: 2026-06-10
Changes: Version History - Improve camera handling of push notifications on cold starts on certain cameras.
- Resolved identification and handling issues on certain panels.
- Fixed some bugs with the messenger and notifications.
- Fixed a "Disarming..." indicator that could remain on screen after the system had disarmed.
- Improved camera/doorbell support on certain devices.
- The watch app now supports zone statuses.
- Fixed an incorrect orange settings indicator on certain cameras until the SD Card screen had been opened.
- Fixed a sensor zone occasionally listing the same state twice (e.g., "Tampered | Tampered").
- Activating or deactivating a scene on a multi-partition panel no longer resets the scene to partition 1.
- Scanning certain non-validated cameras now shows a clearer prompt with options instead of failing partway through pairing.
- Added motion tracking support for compatible cameras where the feature was missing. - Fixed several issues on multi-partition systems, including incorrect arming options and zones disappearing when switching partitions.
- Improved sync of arming state and user permissions when returning to the app.
- Reduced flicker and faster app launch on accounts with multiple systems.
- Fixed a spurious "Failed to grant access" message when adding a user.
- Fixed a rare crash when handling push notifications.
- Disabled partitions are no longer shown on device, zone, and scene cards.
- Improved the camera Event Reporting toggle with a loading indicator while changes apply.
- Misc. bug fixes and improvements. 3.31.6 13h ago - Improved NFC support where applicable.
- Added partition and cancel/confirm support in the watch app.
- Improved sensor support for Open/Close scene triggers.
- Added momentary open hardening.
- Improved System Arming Level triggers to better support different panel types.
- Improved live view aspect ratio support.
- Various UI and prompt tweaks.
- Added camera battery indicator where supported.
- Fixed username sync issues.
- Fixed some camera timezone issues.
- Resolved issues between user sessions.
- Fixed Zone notification device name not showing in notification title.
- Resolved localization and notification issues.
- General crash hardening.
- Misc. bug fixes and improvements. 3.31.5 May 18 - Misc. bug fixes and improvements. 3.31.4 Apr 16 - Misc. bug fixes and improvements. 3.31.3 Mar 24 - Fixed some localization issues.
- Fixed some camera aspect ratio issues.
- Resolves some motion detection setting issues.
- Adds some motion detection event context info where applicable.
- Misc. bug fixes and improvements. 3.31.2 Mar 20 - Fixed some localization issues.
- Fixed some camera aspect ratio issues.
- Resolves some motion detection setting issues.
- Adds some motion detection event context info where applicable.
- Misc. bug fixes and improvements. 3.31.0 Mar 6 - Misc. bug fixes and improvements. 3.30.1 Feb 13 - Zone bypass prompt should now show where applicable during arming sequences.
- Misc. bug fixes and improvements. 3.29.0 Jan 26 - Misc. bug fixes and improvements. 3.28.12 12/12/2025 - Misc. bug fixes and improvements. 3.28.11 12/10/2025 - Activity/Ignore/Privacy zone support has been improved on certain camera models.
- PTZ support is now blocked on certain models when a privacy zone is active.
- PTZ Calibrate/Home setting should now work where supported.
- PTZ on certain camera models should now work by holding the buttons.
- Improved support for larger accounts.
- Misc. bug fixes and improvements. 3.28.10 11/22/2025 - Resolved a doorbell enrollment issue that resulted in notifications not being configured initially.
- Improved some enrollment steps on certain cameras.
- Addresses an issue where sensor temperature would be invisible on certain panels.
- Resolved a camera provisioning issue where certain text would get truncated if the user had Bold text accessibility option enabled.
- Resolved some issues around SD Card reading/formatting in certain cameras.
- Improved camera support.
- Misc. bug fixes and improvements. 3.28.8 11/01/2025 - Misc. bug fixes and improvements. 3.28.7 10/23/2025 - Fixed a bug that caused the EULA acceptance screen to have buttons that matched the toolbar and were therefore impossible to see.
- Resolved issues with two-way voice on certain doorbells.
- Better handling of camera checking during enrollment against plan counts.
- Resolved a bug for camera speaker settings on newer cameras.
- Added initial scene name editing during creation.
- Resolved an issue that prevented most z-wave devices from launching into their respective UIs from the device screen.
- Resolved an issue that prevented certain camera provisioning attempts from succeeding.
- Misc. bug fixes and improvements. 3.28.6 10/16/2025 - Misc. bug fixes and improvements. 3.28.5 10/08/2025 - Improved chime on open/close support.
- Sending silence trouble beeps request now informs user that the request was sent.
- Resolved issue where cancel/confirm feature setting wasn't captured in certain instances.
- Improved chime managment support for partitioned systems.
- Resolved a bug that prevented the global chime from showing the correct state.
- Event log users should now match other platforms/clients.
- Fixed a bug resulting in stalling when enrolling Onvif cameras.
- Resolved a crash when removing an Onvif camera.
- Resolved an issue where renaming a zone could see it flash back to the previous name due to a race condition with requesting the cached name immediately after.
- Misc. bug fixes and improvements. 3.28.4 10/06/2025 - Improved peripheral trouble handling.
- The silence troubles button should now always be shown on the trouble screen.
- Certain panel types will now let you associated them with ONVIF/RTSP cameras where supported.
- Added support for "snoozing" a walkthrough after initial dismissal on certain panels.
- Misc. bug fixes and improvements. 3.27.2 03/08/2025 - Resolved an issue preventing manual unbypassing bypassed zones on an older panel type. 3.27.1 02/11/2025 - Added support for unbypassing bypassed zones manually on newer panel types.
- Fixed some issues around event logs in Demo Mode including their persistence once you log out.
- Event logs should now be pulled for all panel types.
- Resolved an issue in the system selection popup that prevented certain systems from showing their current armed state.
- Resolved an issue that prevented door lock logs from populating.
- Added theme change support to a view controller where it was missing (used by the Events screen/tab).
- Added watch support.
- Crashing bug fixes.
- Misc. bug fixes and improvements. 3.27.0 02/10/2025 - Fixed an issue on iOS 18 iPad devices where a new tab bar style prevented system switching.
- Resolved a login screen prompt issue related to connectivity.
- Misc. bug fixes and improvements. 3.26.17 01/08/2025 - Crashing bug fixes.
- Misc. bug fixes and improvements. 3.26.16 12/23/2024 - Fixed an issue that could lead to z-wave thermostats to flicker values for it's temperature based on incoming reports in different scales.
- Crashing bug fixes.
- Misc. bug fixes and improvements. 3.26.15 12/12/2024 - Misc. bug fixes and improvements. 3.26.6 10/22/2024 - Resolved a bug that prevented user preferences from being saved properly.
- Misc. bug fixes and improvements. 3.26.5 10/12/2024 - Improved sensor detection in initial walkthrough.
- Misc. bug fixes and improvements. 3.26.4 10/09/2024
Alder Mobile version 3.31.0
Updated At: 2026-03-06
Changes: - Fixed some localization issues.
- Fixed some camera aspect ratio issues.
- Resolves some motion detection setting issues.
- Adds some motion detection event context info where applicable.
- Misc. bug fixes and improvements.
Alder Mobile version 3.30.1
Updated At: 2026-02-13
Changes: - Misc. bug fixes and improvements.
Alder Mobile version 3.27.2
Updated At: 2025-03-08
Changes: Mar 8, 2025
Version 3.27.2
- Improved peripheral trouble handling.
- The silence troubles button should now always be shown on the trouble screen.
- Certain panel types will now let you associated them with ONVIF/RTSP cameras where supported.
- Added support for "snoozing" a walkthrough after initial dismissal on certain panels.
- Misc. bug fixes and improvements.
Alder Mobile version 3.27.1
Updated At: 2025-02-11
Changes: Feb 11, 2025
Version 3.27.1
- Resolved an issue preventing manual unbypassing bypassed zones on an older panel type.
Alder Mobile version 3.26.17
Updated At: 2025-01-08
Changes: Jan 8, 2025
Version 3.26.17
- Fixed an issue on iOS 18 iPad devices where a new tab bar style prevented system switching.
- Resolved a login screen prompt issue related to connectivity.
- Misc. bug fixes and improvements.
Alder Mobile version 3.26.16
Updated At: 2024-12-23
Changes: Dec 23, 2024
Version 3.26.16
- Crashing bug fixes.
- Misc. bug fixes and improvements.
Alder Mobile version 3.26.15
Updated At: 2024-12-12
Changes: Dec 12, 2024
Version 3.26.15
- Fixed an issue that could lead to z-wave thermostats to flicker values for it's temperature based on incoming reports in different scales.
- Crashing bug fixes.
- Misc. bug fixes and improvements.
Alder Mobile version 3.26.6
Updated At: 2024-10-22
Changes: Oct 22, 2024
Version 3.26.6
- Misc. bug fixes and improvements.
Alder Mobile version 3.26.5
Updated At: 2024-10-12
Changes: Oct 12, 2024
Version 3.26.5
- Resolved a bug that prevented user preferences from being saved properly.
- Misc. bug fixes and improvements.
Disclaimer
Official App Store Link
We do not host Alder Mobile on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Alder Mobile is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
