About AB My Pool
The fast, easy, and accurate way to measure your swimming pool for a new vinyl liner or safety cover. Version History Minor improvements to the error handling for database updates. Minor fixes and improvements. 5.9.1 Apr...
The fast, easy, and accurate way to measure your swimming pool for a new vinyl liner or safety cover.
Version History Minor improvements to the error handling for database updates. Minor fixes and improvements. 5.9.1 Apr 15 Improvements to the error handling for database updates. Minor fixes and improvements. 5.8.6 08/30/2025 Fix improper merging of features with the same name when copying a project. Improved app startup time by reducing the amount of data read from the database at startup. Include the corner radius or diagonal length on the plot for rectangular pools. Improve placement of "Top" buttons on Liner Patterns screen for long names of pattern groupings. The app privacy policy is now available from the left menu. Minor fixes and improvements. 5.8.5 08/14/2025 Minor fixes and improvements. 5.7.3 04/02/2024 Correct HTML report file for liners to use the correct "Series" heading for the liner pattern instead of using the "Material" heading. Minor fixes and improvements. 5.7.2 06/04/2023 Fix to possible crash when support for Bluetooth headsets was enabled in the Preferences. Removed the headset control preference since it is no longer needed. Improve display of pictures to better match their actual aspect ratio. Minor fixes and improvements. 5.7.1 03/08/2023 Enable complexity setting for rectangle and oval pools. This allows these projects to use AB measurements for interior features as well as to flip "+out" points to place the point inside the pool instead. Added a "insert point" command for voice recognition to allow a new point to be created and inserted after the current point. The deep end view for rectangle and oval liner plots is now on the left side of the plot instead of the right side. The process type (quote vs order) is now included in the email subject heading. Fix an issue with bounding box calculations for the plot that, on rare occasion, could result in the app hanging. Minor fixes and improvements. 5.6.2 04/15/2022 Fix for issue that could result in a hang during startup on iOS 14.6. Minor fixes and improvements. 5.5.1 06/21/2021 'A-B Point' type should not be shown for oval and rectangular pools. Fix possible hang at start up if no projects were created when it was first run. Minor fixes and improvements. 5.4.2 04/20/2021 Added voice command: "add label [label name]" to allow for addition of point labels through voice recognition. Enabled voice recognition for rectangular and oval pool measurements. Fixed case where the Bluetooth headset control status was not correctly shown in the preferences. Some improvements to the use of a Bluetooth headset (when enabled) for speech output. Updated voice recognition parser to allow leading (and ignored) words to have apostrophes in them. Some behind the scenes changes. Minor fixes and improvements. 5.3.2 10/16/2020 Fixed an instance where the Anchors feature was not always created for free-form replacement safety covers. Now validates that email addresses are properly formed. Added a button for the preferences to the bottom of the Home screen. Added more information to the dialog message if the sending of a project was not able to complete. Warning dialog messages are now more clear on which information is missing from a user or distributor profile. Some behind the scenes changes. Minor fixes and improvements. 5.3.1 06/30/2020 Added support for voice recognition! Now you can speak your measurements leaving your hands free for the tape measure! You can enable voice recognition via the Speech tab of the My Account screen. 5.1.3 02/18/2020 Added all-A then all-B mode for the Measure screen. This makes entering data a little simpler for users that prefer to measure all of the A's followed by all of the B's. Minor fixes and improvements. 5.1.1 06/19/2019 Fix to speech output not working sometimes even when enabled. Minor fixes and improvements. 5.0.4 05/30/2019 Added speech output for measurement values. Added ability to use geolocation to determine user and customer addresses. Changed menu and help buttons in the header bar to be cleaner round buttons. Added A-B length to first page of HTML report. Fixed an exception due to loss of name for AB reference. Added customer email address for a project. Minor fixes and improvements. 5.0.3 05/18/2019 Fixed issue that prevented the sending of projects for some users. Minor fixes and improvements. 4.1.5 11/07/2018 Added support for height/depth measurements for complex freeform projects. Turn on height measurements in Advanced Properties section of the Feature Properties screen. Increased the plot size on the Measurement screen for some iPhone screen sizes. Fixed image filenames when copying a project that has images. Fixed crash on rectangle covers created by copying a rectangle liner. Added ability to add a point from the Point Properties screen. Added help information for the Copy Project screen. Fixed error when sending projects from devices still on iOS 9. Minor fixes and improvements. 4.1.0 05/01/2018 Added support for complex freeform pool projects to allow for the measurement of larger pools and for easier measurement of features within the pool perimeter. Complex project allow for additional reference lines and the use of points other than the A and B points such as perimeter points, as reference points. Restructured the My Account screen to allow for better groupings of the controls. Added a text description to features, steps, etc. Added support for multiple user and distributor identities. Changed how the pool's overall width and length are calculated. The new method is better able to align the length and width with the pool's shape. Changed how the pool plot is included in the email message to work around email clients that truncate the email and corrupt the plot. Changed plot legend to contain the color names when printed. Improved layout of the point data display in the Measurements screen for small screens in landscape mode. Some adjustments to font sizes used on the plots to improve clarity. Fixed missing "Other" collection from the liner patterns and cover materials. When printing the HTML report, fixed an instance where a heading could be printed on a separate page from its data. Minor fixes and improvements. 4.0.1 03/21/2018 Fixed issue where some warnings were not being shown. Minor adjustments to cross pool measurement tolerances. Tweak to warning related to small corner sizes for rectangular pools. Improved layout of the point data display in the Measurements screen for small screens in landscape mode. Slightly decreased the size of the names of steps, break lines, and cross pool measurements on the plots. Minor fixes and improvements. 3.9.3 04/27/2017 Fix to feature creation from Measurements screen to show the proper properties screen. Now plots the names of steps, break lines, and cross pool measurements. Improvements to the Measurements screen for non-AB points. Minor fixes and improvements. 3.9.1 03/27/2017 Added ability to measure a pool for both a liner and a cover. Use the copy button on the Info screen to copy a completed project and change its type. Added the length and width values for steps and cross pool measurements to the Measurements screen below the point inputs. This should be a more convenient location than just existing on the step and cross pool measurement properties screens. Allow the text to go smaller on the plots for smaller devices. Looks a lot cleaner but the font is much smaller. Fix to copy feature operation where the number of copied points could be incorrect. Fix to HTML report file for accented French characters, etc. Fixed a timing issue where stale data could be saved for project features such as break lines and steps. Primarily affects the example projects. Fixed rare instance where the source points for features, break lines, or steps could not be selected. Minor fixes and improvements. 3.9.0 03/06/2017 Minor fixes and improvements. 3.8.0 12/15/2016 Performance improvements in the tracking of project data. Fixed an instance where pictures for a project were no longer available. When adding an image to a project, it now checks to be sure that the chosen filename does not already exist. Fixed case where the app didn't return to the Review screen after sending a project. Now uses a secure connection when sending projects. Minor fixes and improvements. 3.7.3 11/18/2016 Some reformatting of the HTML report so that it prints out in a fewer number of pages. Moved warnings to just below the description/comments in the HTML report file to make them more visible. Reduced the height of the pool plot in the HTML report file for rectangle and oval projects. No longer allows the deletion of any feature, break line, step, etc that contains points referenced by other points. The measurements page will now add points to features if the feature contains less than the minimum number of required points. This could have happened in previous versions by attempting to delete a break line, step, etc that contained a point that was referenced by another point. The point properties page now lists any points that are known to reference the displayed point. Several improvements in the tracking of point references. Minor fixes and improvements. 3.7.2 09/29/2016 Added warning if corner size is too small for rectangular pools. Fixed update of the points list on the measurements page if a point's label is changed. Now shortens long feature names before displaying them in the measurements page's point data display. Minor fixes and improvements. 3.6.5 04/29/2016
Previous Versions
Here you can find the changelog of AB My Pool since it was posted on our website on 2023-09-25 11:04:46.
The latest version is 5.9.1 and it was updated on 2026-06-24 19:02:22. See below the changes in each version.
AB My Pool version 5.9.1
Updated At: 2026-06-03
Changes: Version History Minor improvements to the error handling for database updates.
Minor fixes and improvements. 5.9.1 Apr 15 Improvements to the error handling for database updates.
Minor fixes and improvements. 5.8.6 08/30/2025 Fix improper merging of features with the same name when copying a project.
Improved app startup time by reducing the amount of data read from the database at startup.
Include the corner radius or diagonal length on the plot for rectangular pools.
Improve placement of "Top" buttons on Liner Patterns screen for long names of pattern groupings.
The app privacy policy is now available from the left menu.
Minor fixes and improvements. 5.8.5 08/14/2025 Minor fixes and improvements. 5.7.3 04/02/2024 Correct HTML report file for liners to use the correct "Series" heading for the liner pattern instead of using the "Material" heading.
Minor fixes and improvements. 5.7.2 06/04/2023 Fix to possible crash when support for Bluetooth headsets was enabled in the Preferences. Removed the headset control preference since it is no longer needed.
Improve display of pictures to better match their actual aspect ratio.
Minor fixes and improvements. 5.7.1 03/08/2023 Enable complexity setting for rectangle and oval pools. This allows these projects to use AB measurements for interior features as well as to flip "+out" points to place the point inside the pool instead.
Added a "insert point" command for voice recognition to allow a new point to be created and inserted after the current point.
The deep end view for rectangle and oval liner plots is now on the left side of the plot instead of the right side.
The process type (quote vs order) is now included in the email subject heading.
Fix an issue with bounding box calculations for the plot that, on rare occasion, could result in the app hanging.
Minor fixes and improvements. 5.6.2 04/15/2022 Fix for issue that could result in a hang during startup on iOS 14.6.
Minor fixes and improvements. 5.5.1 06/21/2021 'A-B Point' type should not be shown for oval and rectangular pools.
Fix possible hang at start up if no projects were created when it was first run.
Minor fixes and improvements. 5.4.2 04/20/2021 Added voice command: "add label [label name]" to allow for addition of point labels through voice recognition.
Enabled voice recognition for rectangular and oval pool measurements.
Fixed case where the Bluetooth headset control status was not correctly shown in the preferences.
Some improvements to the use of a Bluetooth headset (when enabled) for speech output.
Updated voice recognition parser to allow leading (and ignored) words to have apostrophes in them.
Some behind the scenes changes.
Minor fixes and improvements. 5.3.2 10/16/2020 Fixed an instance where the Anchors feature was not always created for free-form replacement safety covers.
Now validates that email addresses are properly formed.
Added a button for the preferences to the bottom of the Home screen.
Added more information to the dialog message if the sending of a project was not able to complete.
Warning dialog messages are now more clear on which information is missing from a user or distributor profile.
Some behind the scenes changes.
Minor fixes and improvements. 5.3.1 06/30/2020 Added support for voice recognition! Now you can speak your measurements leaving your hands free for the tape measure!
You can enable voice recognition via the Speech tab of the My Account screen. 5.1.3 02/18/2020 Added all-A then all-B mode for the Measure screen. This makes entering data a little simpler for users that prefer to measure all of the A's followed by all of the B's.
Minor fixes and improvements. 5.1.1 06/19/2019 Fix to speech output not working sometimes even when enabled.
Minor fixes and improvements. 5.0.4 05/30/2019 Added speech output for measurement values.
Added ability to use geolocation to determine user and customer addresses.
Changed menu and help buttons in the header bar to be cleaner round buttons.
Added A-B length to first page of HTML report.
Fixed an exception due to loss of name for AB reference.
Added customer email address for a project.
Minor fixes and improvements. 5.0.3 05/18/2019 Fixed issue that prevented the sending of projects for some users.
Minor fixes and improvements. 4.1.5 11/07/2018 Added support for height/depth measurements for complex freeform projects.
Turn on height measurements in Advanced Properties section of the Feature Properties screen.
Increased the plot size on the Measurement screen for some iPhone screen sizes.
Fixed image filenames when copying a project that has images.
Fixed crash on rectangle covers created by copying a rectangle liner.
Added ability to add a point from the Point Properties screen.
Added help information for the Copy Project screen.
Fixed error when sending projects from devices still on iOS 9.
Minor fixes and improvements. 4.1.0 05/01/2018 Added support for complex freeform pool projects to allow for the measurement of larger pools and for easier measurement of features within the pool perimeter. Complex project allow for additional reference lines and the use of points other than the A and B points such as perimeter points, as reference points.
Restructured the My Account screen to allow for better groupings of the controls.
Added a text description to features, steps, etc.
Added support for multiple user and distributor identities.
Changed how the pool's overall width and length are calculated. The new method is better able to align the length and width with the pool's shape.
Changed how the pool plot is included in the email message to work around email clients that truncate the email and corrupt the plot.
Changed plot legend to contain the color names when printed.
Improved layout of the point data display in the Measurements screen for small screens in landscape mode.
Some adjustments to font sizes used on the plots to improve clarity.
Fixed missing "Other" collection from the liner patterns and cover materials.
When printing the HTML report, fixed an instance where a heading could be printed on a separate page from its data.
Minor fixes and improvements. 4.0.1 03/21/2018 Fixed issue where some warnings were not being shown.
Minor adjustments to cross pool measurement tolerances.
Tweak to warning related to small corner sizes for rectangular pools.
Improved layout of the point data display in the Measurements screen for small screens in landscape mode.
Slightly decreased the size of the names of steps, break lines, and cross pool measurements on the plots.
Minor fixes and improvements. 3.9.3 04/27/2017 Fix to feature creation from Measurements screen to show the proper properties screen.
Now plots the names of steps, break lines, and cross pool measurements.
Improvements to the Measurements screen for non-AB points.
Minor fixes and improvements. 3.9.1 03/27/2017 Added ability to measure a pool for both a liner and a cover. Use the copy button on the Info screen to copy a completed project and change its type.
Added the length and width values for steps and cross pool measurements to the Measurements screen below the point inputs. This should be a more convenient location than just existing on the step and cross pool measurement properties screens.
Allow the text to go smaller on the plots for smaller devices. Looks a lot cleaner but the font is much smaller.
Fix to copy feature operation where the number of copied points could be incorrect.
Fix to HTML report file for accented French characters, etc.
Fixed a timing issue where stale data could be saved for project features such as break lines and steps. Primarily affects the example projects.
Fixed rare instance where the source points for features, break lines, or steps could not be selected.
Minor fixes and improvements. 3.9.0 03/06/2017 Minor fixes and improvements. 3.8.0 12/15/2016 Performance improvements in the tracking of project data.
Fixed an instance where pictures for a project were no longer available.
When adding an image to a project, it now checks to be sure that the chosen filename does not already exist.
Fixed case where the app didn't return to the Review screen after sending a project.
Now uses a secure connection when sending projects.
Minor fixes and improvements. 3.7.3 11/18/2016 Some reformatting of the HTML report so that it prints out in a fewer number of pages.
Moved warnings to just below the description/comments in the HTML report file to make them more visible.
Reduced the height of the pool plot in the HTML report file for rectangle and oval projects.
No longer allows the deletion of any feature, break line, step, etc that contains points referenced by other points.
The measurements page will now add points to features if the feature contains less than the minimum number of required points. This could have happened in previous versions by attempting to delete a break line, step, etc that contained a point that was referenced by another point.
The point properties page now lists any points that are known to reference the displayed point.
Several improvements in the tracking of point references.
Minor fixes and improvements. 3.7.2 09/29/2016 Added warning if corner size is too small for rectangular pools.
Fixed update of the points list on the measurements page if a point's label is changed.
Now shortens long feature names before displaying them in the measurements page's point data display.
Minor fixes and improvements. 3.6.5 04/29/2016
AB My Pool version 5.8.6
Updated At: 2025-08-30
Changes: Aug 30, 2025
Version 5.8.6
Improvements to the error handling for database updates.
Minor fixes and improvements.
AB My Pool version 5.8.6
Updated At: 2025-08-30
Changes: Improvements to the error handling for database updates.
Minor fixes and improvements.
AB My Pool version 5.8.5
Updated At: 2025-08-14
Changes: Aug 14, 2025
Version 5.8.5
Fix improper merging of features with the same name when copying a project.
Improved app startup time by reducing the amount of data read from the database at startup.
Include the corner radius or diagonal length on the plot for rectangular pools.
Improve placement of "Top" buttons on Liner Patterns screen for long names of pattern groupings.
The app privacy policy is now available from the left menu.
Minor fixes and improvements.
AB My Pool version 5.7.3
Updated At: 2024-04-02
Changes: Apr 2, 2024
Version 5.7.3
Minor fixes and improvements.
AB My Pool version 5.7.2
Updated At: 2023-06-04
Changes: Jun 4, 2023
Version 5.7.2
Correct HTML report file for liners to use the correct "Series" heading for the liner pattern instead of using the "Material" heading.
Minor fixes and improvements.
Disclaimer
Official App Store Link
We do not host AB My Pool on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for AB My Pool is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
