About 2BRO ELD PRO
2BRO ELD PRO - FMCSA-Compliant ELD App for Truck Drivers 2BRO ELD PRO is a reliable and easy-to-use Electronic Logging Device (ELD) app designed to help commercial drivers stay compliant with the FMCSA’s Hours of Service...
2BRO ELD PRO - FMCSA-Compliant ELD App for Truck Drivers 2BRO ELD PRO is a reliable and easy-to-use Electronic Logging Device (ELD) app designed to help commercial drivers stay compliant with the FMCSA’s Hours of Service (HOS) regulations. Built for simplicity and accuracy, it’s the ideal tool for truckers who need to manage their logs from the road without hassle. Whether you’re an owner-operator or part of a fleet, 2BRO ELD PRO gives you full control over your daily logs, ensuring you meet all compliance standards while focusing on what matters most-driving. FMCSA-compliant app to record driver duty status and meet the following regulations: -60h/7days or 70h/8days Rules -34 week restart with latest suspension of two periods 1-5am -11h daily -14h onduty (daily) -Sleeper Berth -Personal Conveyance -30 minutes Break -Location recording for engine on and off, and every 60 minutes if moving -Mobile device permits duty status changes only when the vehicle is at rest -Warns driver, visually and/or audibly of any malfunction -When the truck is stationary for 5 minutes or more, it will default to on-duty not driving and the driver must enter the proper status -The device (ELD) performs self-test, as well as a self-test at any point upon request of an authorized safety assurance official. Allows for driver and carrier record edits as well as unauthenticated operation. Support for Hours of Service September 29th 2020 Hours of Service regulation changes added.
Version History - General enhanced ELD Stability and Performance 1.0.56 Jun 3 -Reset HOS violations when the driver applies the split provision. -Added validation for ECM VIN. -Improved forced asset selection process. -Updated minimum version requirements. -Added new geolocation data to driver status. 1.0.54 May 12 1-Enhanced ECM values in new driver events. 2-Validate GPS Provider. 3-Fix driver Location Description. 4-Validate Generation of Engine ON/OFF. 1.0.52 Mar 8 1-Enhanced diagnostics and malfunction generation.(Automatic Engine Synchronization) 2-New oversize and U.S. short-haul ruleset. 3-Enable the 16-hour short-haul exemption. 4-Generate intermediate logs for the co-driver. 5-New ELD notification to notify the driver when the ELD loses ECM data. 1.0.50 Feb 17 1-Enhanced diagnostics and malfunction generation.(Automatic Engine Synchronization) 2-New oversize and U.S. short-haul ruleset. 3-Enable the 16-hour short-haul exemption. 4-Generate intermediate logs for the co-driver. 5-New ELD notification to notify the driver when the ELD loses ECM data. 1.0.49 Feb 11 1- Enhanced Event Sequences Ids. 2- Improve Go To Driving Automatic Process. 3- Not Generate New Event when Add New Event Remark 4- Show Dialog Information when ECM VIN not match with VIN Profile. 5- Enhanced Generate IGN-ON when Change Vehicle Profile. 1.0.43 12/15/2025 1- Enable Feature to send FMCSA Logs by Email 2- Enhanced Shipment Fields, allow blank spaces. 3- Improve process go to On-Duty Automatic 4- Disable show all Events functionality in Landscape Mode screen 5- Update PDF View 1.0.42 12/07/2025 1- Validate Carrier Status. Only show available carriers. 2- Enhanced the Geolocation functionality when launch the app. 3- Validate Manual Locations Inputs 4- Enhanced Driving Automatics Events 1.0.41 12/01/2025 1-Add New Inactivity Event(OFF Duty) for cover export FMCSA days 2-Enhanced the Tractor and Trailer Asset Selection and creation functionality. 1.0.40 11/08/2025 1-Carrier API Key details can be downloaded and viewed in Driver Profile 2-Added ECM Odometer / Manual Odometer field in DVIR 3-Odometer value now included in DVIR PDF report 4-Improved detection of 30-Minute Break Violations 5-Violations are automatically cleared after new DCP with Split Sleeper 6-Fixed issue with Driver Events not reloading after app restart (timezone) 1.0.38 09/19/2025 -Enable Provision for Adverse Driving Condition Exemption -Introduce New ELD Exemptions -Validate Asset VIN During Creation or Update -Add Asset Synchronization Action -Adjust Shipment Dates in History Records -Correct Odometer Value in DVIR Reports -Revise Signature Display in DVIR View 1.0.37 08/30/2025 Improvements to device connectivity 1.0.35 08/07/2025 -Update the asset creation process in the app to sync with the new workflow. -Refine the VIN validation for better accuracy. -Modify the violation timestamp to show only when the driver starts or exits driving. -Add a feature to calculate and display cycle recap hours in the cycle timer. -Enable driver status tracking when the driver changes status. -Add validation to require a signature for DVIR inspections. -Optimize engine ON/OFF event generation and intermediate movements. -Improve app performance to reduce delays and assist with troubleshooting. -Add input validation for FMCSA comment exports. 1.0.33 08/02/2025 -Feature to change the Carrier Information in the Driver Profile. -Co-Driver is now correctly validated when switching to Driving status. -Resolved issue with Event Sequence ID handling. -FMCSA CSV Diagnostic and Malfunction enums have been updated. -Implemented Texas Intrastate 70 hours / 7 days ruleset. -FMCSA export interval dates are now validated to prevent editing within locked periods. -Added VIN validation. -Shipment number input now includes validation checks. -Login view has been optimized for landscape mode (Driver / Co-Driver). -Enhanced print view with improved display of the graph section. -Enhanced Driver status ECM and Location. 1.0.31 07/11/2025 1.0.29 06/03/2025
Previous Versions
Here you can find the changelog of 2BRO ELD PRO since it was posted on our website on 2026-01-25 02:06:09.
The latest version is 1.0.56 and it was updated on 2026-06-11 21:53:04. See below the changes in each version.
2BRO ELD PRO version 1.0.56
Updated At: 2026-06-11
Changes: Version History - General enhanced ELD Stability and Performance 1.0.56 Jun 3 -Reset HOS violations when the driver applies the split provision.
-Added validation for ECM VIN.
-Improved forced asset selection process.
-Updated minimum version requirements.
-Added new geolocation data to driver status. 1.0.54 May 12 1-Enhanced ECM values in new driver events.
2-Validate GPS Provider.
3-Fix driver Location Description.
4-Validate Generation of Engine ON/OFF. 1.0.52 Mar 8 1-Enhanced diagnostics and malfunction generation.(Automatic Engine Synchronization)
2-New oversize and U.S. short-haul ruleset.
3-Enable the 16-hour short-haul exemption.
4-Generate intermediate logs for the co-driver.
5-New ELD notification to notify the driver when the ELD loses ECM data. 1.0.50 Feb 17 1-Enhanced diagnostics and malfunction generation.(Automatic Engine Synchronization)
2-New oversize and U.S. short-haul ruleset.
3-Enable the 16-hour short-haul exemption.
4-Generate intermediate logs for the co-driver.
5-New ELD notification to notify the driver when the ELD loses ECM data. 1.0.49 Feb 11 1- Enhanced Event Sequences Ids.
2- Improve Go To Driving Automatic Process.
3- Not Generate New Event when Add New Event Remark
4- Show Dialog Information when ECM VIN not match with VIN Profile.
5- Enhanced Generate IGN-ON when Change Vehicle Profile. 1.0.43 12/15/2025 1- Enable Feature to send FMCSA Logs by Email
2- Enhanced Shipment Fields, allow blank spaces.
3- Improve process go to On-Duty Automatic
4- Disable show all Events functionality in Landscape Mode screen
5- Update PDF View 1.0.42 12/07/2025 1- Validate Carrier Status. Only show available carriers.
2- Enhanced the Geolocation functionality when launch the app.
3- Validate Manual Locations Inputs
4- Enhanced Driving Automatics Events 1.0.41 12/01/2025 1-Add New Inactivity Event(OFF Duty) for cover export FMCSA days
2-Enhanced the Tractor and Trailer Asset Selection and creation functionality. 1.0.40 11/08/2025 1-Carrier API Key details can be downloaded and viewed in Driver Profile
2-Added ECM Odometer / Manual Odometer field in DVIR
3-Odometer value now included in DVIR PDF report
4-Improved detection of 30-Minute Break Violations
5-Violations are automatically cleared after new DCP with Split Sleeper
6-Fixed issue with Driver Events not reloading after app restart (timezone) 1.0.38 09/19/2025 -Enable Provision for Adverse Driving Condition Exemption
-Introduce New ELD Exemptions
-Validate Asset VIN During Creation or Update
-Add Asset Synchronization Action
-Adjust Shipment Dates in History Records
-Correct Odometer Value in DVIR Reports
-Revise Signature Display in DVIR View 1.0.37 08/30/2025 Improvements to device connectivity 1.0.35 08/07/2025 -Update the asset creation process in the app to sync with the new workflow.
-Refine the VIN validation for better accuracy.
-Modify the violation timestamp to show only when the driver starts or exits driving.
-Add a feature to calculate and display cycle recap hours in the cycle timer.
-Enable driver status tracking when the driver changes status.
-Add validation to require a signature for DVIR inspections.
-Optimize engine ON/OFF event generation and intermediate movements.
-Improve app performance to reduce delays and assist with troubleshooting.
-Add input validation for FMCSA comment exports. 1.0.33 08/02/2025 -Feature to change the Carrier Information in the Driver Profile.
-Co-Driver is now correctly validated when switching to Driving status.
-Resolved issue with Event Sequence ID handling.
-FMCSA CSV Diagnostic and Malfunction enums have been updated.
-Implemented Texas Intrastate 70 hours / 7 days ruleset.
-FMCSA export interval dates are now validated to prevent editing within locked periods.
-Added VIN validation.
-Shipment number input now includes validation checks.
-Login view has been optimized for landscape mode (Driver / Co-Driver).
-Enhanced print view with improved display of the graph section.
-Enhanced Driver status ECM and Location. 1.0.31 07/11/2025 1.0.29 06/03/2025
2BRO ELD PRO version 1.0.52
Updated At: 2026-05-09
Changes: Version History 1-Enhanced ECM values in new driver events.
2-Validate GPS Provider.
3-Fix driver Location Description.
4-Validate Generation of Engine ON/OFF. 1.0.52 Mar 8 1-Enhanced diagnostics and malfunction generation.(Automatic Engine Synchronization)
2-New oversize and U.S. short-haul ruleset.
3-Enable the 16-hour short-haul exemption.
4-Generate intermediate logs for the co-driver.
5-New ELD notification to notify the driver when the ELD loses ECM data. 1.0.50 Feb 17 1-Enhanced diagnostics and malfunction generation.(Automatic Engine Synchronization)
2-New oversize and U.S. short-haul ruleset.
3-Enable the 16-hour short-haul exemption.
4-Generate intermediate logs for the co-driver.
5-New ELD notification to notify the driver when the ELD loses ECM data. 1.0.49 Feb 11 1- Enhanced Event Sequences Ids.
2- Improve Go To Driving Automatic Process.
3- Not Generate New Event when Add New Event Remark
4- Show Dialog Information when ECM VIN not match with VIN Profile.
5- Enhanced Generate IGN-ON when Change Vehicle Profile. 1.0.43 12/15/2025 1- Enable Feature to send FMCSA Logs by Email
2- Enhanced Shipment Fields, allow blank spaces.
3- Improve process go to On-Duty Automatic
4- Disable show all Events functionality in Landscape Mode screen
5- Update PDF View 1.0.42 12/07/2025 1- Validate Carrier Status. Only show available carriers.
2- Enhanced the Geolocation functionality when launch the app.
3- Validate Manual Locations Inputs
4- Enhanced Driving Automatics Events 1.0.41 12/01/2025 1-Add New Inactivity Event(OFF Duty) for cover export FMCSA days
2-Enhanced the Tractor and Trailer Asset Selection and creation functionality. 1.0.40 11/08/2025 1-Carrier API Key details can be downloaded and viewed in Driver Profile
2-Added ECM Odometer / Manual Odometer field in DVIR
3-Odometer value now included in DVIR PDF report
4-Improved detection of 30-Minute Break Violations
5-Violations are automatically cleared after new DCP with Split Sleeper
6-Fixed issue with Driver Events not reloading after app restart (timezone) 1.0.38 09/19/2025 -Enable Provision for Adverse Driving Condition Exemption
-Introduce New ELD Exemptions
-Validate Asset VIN During Creation or Update
-Add Asset Synchronization Action
-Adjust Shipment Dates in History Records
-Correct Odometer Value in DVIR Reports
-Revise Signature Display in DVIR View 1.0.37 08/30/2025 Improvements to device connectivity 1.0.35 08/07/2025 -Update the asset creation process in the app to sync with the new workflow.
-Refine the VIN validation for better accuracy.
-Modify the violation timestamp to show only when the driver starts or exits driving.
-Add a feature to calculate and display cycle recap hours in the cycle timer.
-Enable driver status tracking when the driver changes status.
-Add validation to require a signature for DVIR inspections.
-Optimize engine ON/OFF event generation and intermediate movements.
-Improve app performance to reduce delays and assist with troubleshooting.
-Add input validation for FMCSA comment exports. 1.0.33 08/02/2025 -Feature to change the Carrier Information in the Driver Profile.
-Co-Driver is now correctly validated when switching to Driving status.
-Resolved issue with Event Sequence ID handling.
-FMCSA CSV Diagnostic and Malfunction enums have been updated.
-Implemented Texas Intrastate 70 hours / 7 days ruleset.
-FMCSA export interval dates are now validated to prevent editing within locked periods.
-Added VIN validation.
-Shipment number input now includes validation checks.
-Login view has been optimized for landscape mode (Driver / Co-Driver).
-Enhanced print view with improved display of the graph section.
-Enhanced Driver status ECM and Location. 1.0.31 07/11/2025 1.0.29 06/03/2025
2BRO ELD PRO version 1.0.52
Updated At: 2026-03-08
Changes: 1-Enhanced ECM values in new driver events.
2-Validate GPS Provider.
3-Fix driver Location Description.
4-Validate Generation of Engine ON/OFF.
2BRO ELD PRO version 1.0.50
Updated At: 2026-02-17
Changes: 1-Enhanced diagnostics and malfunction generation.(Automatic Engine Synchronization)
2-New oversize and U.S. short-haul ruleset.
3-Enable the 16-hour short-haul exemption.
4-Generate intermediate logs for the co-driver.
5-New ELD notification to notify the driver when the ELD loses ECM data.
2BRO ELD PRO version 1.0.43
Updated At: 2025-12-15
Changes: 1- Enhanced Event Sequences Ids.
2- Improve Go To Driving Automatic Process.
3- Not Generate New Event when Add New Event Remark
4- Show Dialog Information when ECM VIN not match with VIN Profile.
5- Enhanced Generate IGN-ON when Change Vehicle Profile.
Disclaimer
Official App Store Link
We do not host 2BRO ELD PRO on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for 2BRO ELD PRO is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
